Cup Drinks Holders

This OE Match cup / drinks holder is a replacement dashboard fitting for left-hand-drive Porsche 970 Panamera models. It provides a dedicated place to support a drink and is intended for repairs to a damaged or worn holder.

Fits:

• Porsche 970.1 Panamera S V8 4.8L 2009–13
• Porsche 970.1 Panamera 4S V8 4.8L 2009–13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009–13
• Porsche 970.1 Panamera V6 3.6L 2WD 2009–13
• Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009–13
• Porsche 970.1 Panamera Diesel V6 3.0L 2011–13
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011–13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009–13
• Porsche 970.1 Panamera GTS V8 4.8L 2011–13
• Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014–16
• Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014–16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014–16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014–16
• Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014–16
• Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014–16
• Porsche 970.2 Panamera Turbo S V8 4.8L 2014–16
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014–16
• Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014–16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014–16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014–16
• Porsche 970.2 Panamera Turbo V8 Executive 2014–16

Diagram Ref No 24

Dashboard application qualification: PR:098,585. Check fitment for your specific vehicle (model, year, engine) before ordering.

What Is This Part?
This is the drinks holder used within the Panamera dashboard assembly, identified by reference 97055239401. It forms part of the cabin's practical fittings, supporting a suitable drink container rather than leaving it loose on surrounding trim. Its supporting sections and mounting points need to remain intact for the holder to sit correctly and function as intended. When repairing this area, inspect the adjoining trim and fixings as well as the holder itself.

What Does This Part Do?

• Supports a drink: Provides a designated resting position for a suitably sized cup or other drink container.
• Restrains movement: Helps locate the container within the holder instead of allowing it to slide freely across cabin surfaces.
• Forms part of the dashboard installation: Fits into the drinks-holder position within the dashboard assembly on the specified LHD applications.

Why Replace This Part?
A drinks holder may need replacing if its supporting sections are cracked, its mounting points are broken or wear prevents it from holding a suitable container properly. Damage caused by forcing an oversized bottle into the holder can also affect its seating or operation. Replacement addresses the damaged fitting during an interior repair or refurbishment.

Sticky operation should be investigated before deciding that a new holder is needed. Spilt drinks can leave residue around moving parts, while loose trim or damaged adjoining fixings may cause rattles that resemble a holder fault. Clean accessible residue and inspect the complete mounting area before replacing components.

When to Replace This Part?

• Visible damage: Cracks, broken supporting sections or distorted areas prevent normal use.
• Damaged mounting points: Broken retaining features stop the holder seating correctly in the dashboard.
• Persistent sticking: Operation remains restricted after accessible contamination has been removed and the mechanism inspected.
• Poor support: A suitably sized container is no longer supported properly because the holder is worn or damaged.
• Rattles or looseness: Inspection confirms damage to the holder rather than an adjacent trim panel or fixing.

Where Is This Part Fitted?
Location: Within the dashboard drinks-holder assembly on the specified left-hand-drive Porsche 970 Panamera applications. Inspect its mounting area and adjoining dashboard trim when removing or refitting the holder.

Product Summary

• Product: Cup / drinks holder.
• Brand: OE Match.
• Part reference: 97055239401.
• Drive configuration: Left Hand Drive (LHD).
• Fitting area: Dashboard drinks-holder assembly.
• Purpose: Supports a suitable drink container in its designated cabin position.