Cylinder Head / Camshaft Carrier

Camshaft throttle control element.
Sold each.

Fits:
Porsche 958 Cayenne 3.0L HYBIRD
Porsche 970 Panamera 3.0L HYBRID

Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAB109257

The product you are viewing cross references to these numbers

Camshaft throttle control element.
Sold each.

Fits:
Porsche 958 Cayenne 3.0L HYBIRD
Porsche 970 Panamera 3.0L HYBRID

Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAB109257

The product you are viewing cross references to these numbers

Cylinder head bolt M10 x 170 without washer
Sold as a set of 8 (one cylinder head) - 2 sets required per car

Fits:
Porsche 958 Cayenne S Hybrid 3.0ltr - 2011 to 2017

Porsche 95B.2 Macan S 3.0ltr V6 - 2019 to 2021
Porsche 95B.2 Macan GTS 2.9ltr V6 - 2019 to 2021
Porsche 95B.2 Macan turbo 2.9ltr V6 - 2019 to 2021
Porsche 95B.3 Macan S / Macan GTS 2.9ltr V6 - 2022 Onwards
Porsche 970.1 / 970.2 Panamera S Hybrid - 2011 to 2016
Porsche 971.1 Panamera / Panamera 4S 3.0ltr V6 - 2017 to 2021
Porsche 971.1 Panamera 4S 2.9ltr V6 - 2017 to 2021
Porsche 971.1 Panamera 4 E-Hybrid 2.9ltr V6 - 2017 to 2021
Porsche 971.2 Panamera 2 / Panamera 4 2.9ltr V6 - 2021 to 2023
Porsche 971.2 Panamera 4S 2.9ltr V6 - 2021 to 2023
Porsche 971.2 Panamera 4S E-Hybrid 2.9ltr V6 - 2021 to 2023
Porsche 9YA Cayenne 3.0ltr V6 - 2018 to 2023
Porsche 9YA Cayenne S 2.9ltr V6 - 2018 to 2023
Porsche 9YA Cayenne E-Hybrid 3.0ltr V6 - 2018 to 2023

Section of diagram ref no 10 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

WHT005739

The product you are viewing cross references to these numbers

This OE Match cylinder head gasket is for cylinders 4–6, It seals the joint between the cylinder head and engine block, containing combustion pressure and separating oil and coolant passages. 

Fits

• Porsche 958 Cayenne 3.6L V6 Turbo / GTS 2014>>
• Porsche Panamera 3.6L 2011>>
• Porsche Macan S / Turbo / GTS 2014>>
  
  Diagram ref no 35
  
  Check fitment for your specific vehicle (model, year, engine) before ordering. Confirm that the gasket required is for cylinders 4–6.
  
  What Is This Part?

The cylinder head gasket is the sealing layer clamped between the cylinder head and the engine block. Its openings align with the cylinders and the passages crossing this joint. It must seal combustion gases while keeping engine oil and coolant within their respective circuits. Its sealing action depends on the condition of the mating surfaces and the correct clamping force from the cylinder-head fasteners. 

What Does This Part Do?

• Contains combustion pressure: Seals around the combustion chambers at the head-to-block joint.
• Seals coolant passages: Helps prevent coolant escaping across the joint.
• Seals oil passages: Helps contain engine oil where it passes between the block and cylinder head.
• Separates engine circuits: Maintains sealing boundaries between combustion gases, oil and coolant. 
  
  Why Replace This Part?

Replacement may be needed when testing identifies leakage through the cylinder-head joint or inspection reveals damaged sealing areas. Overheating, distorted mating surfaces and incorrect bolt tightening can compromise the seal. A new gasket alone will not correct a warped cylinder head or an unresolved cooling-system fault, so the underlying cause must be investigated during the repair.

During cylinder-head work, have the head and block sealing surfaces checked before reassembly. Follow the engine-specific requirements for surface preparation, fastener renewal and tightening sequence rather than assuming that fitting a gasket is the only work required. 

When to Replace This Part?

• Confirmed joint leakage: Testing identifies combustion-gas, oil or coolant leakage through the head-gasket joint.
• Visible sealing damage: Inspection after dismantling reveals burning, erosion or damage around sealing areas.
• Overheating-related damage: Examination finds gasket damage or distorted mating surfaces following overheating.
• Incorrect previous installation: Inspection reveals misalignment, damaged sealing areas or inadequate clamping. Coolant loss and overheating require diagnosis; neither proves gasket failure on its own. 
  
  Where Is This Part Fitted?

Location: Between the cylinder head and engine block on the bank containing cylinders 4–6.

Technical Details

• Cylinder position: Cylinders 4–6.
• Macan application identifiers: CTMA, CTM, CTLA, CTL, DCNA, DCN, DHKA, DHK.
• Panamera 3.6L application identifiers: 4620, 4640, CWAA, CXNA.
  
  Product Summary

• Product: Cylinder head gasket for cylinders 4–6.
• Brand: OE Match.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610417403

The product you are viewing cross references to these numbers

OE Match cylinder head gasket, It seals the joint between the cylinder head and engine block during cylinder-head repair or engine rebuilding.

Fits

• Porsche 958 Cayenne HYBRID 3.0L 2011-18
• Porsche 970 Panamera HYBRID 3.0L 2010-16
  
  Diagram ref no 25
  
  Check fitment for your specific vehicle (model, year, engine) before ordering.
  
  What Is This Part?

The cylinder head gasket is the sealing component clamped between the cylinder head and the engine block. It seals around the combustion chambers and the oil and coolant passages crossing this joint. These areas must remain sealed from one another despite combustion pressure and changes in engine temperature. Correct sealing depends on the condition of the mating surfaces and the specified cylinder-head tightening procedure, as well as the gasket itself. 

What Does This Part Do?

• Seals combustion pressure: Closes the head-to-block joint around the cylinders.
• Contains coolant: Seals the coolant passages where they cross between the block and cylinder head.
• Contains engine oil: Seals the oil passages at the cylinder-head joint.
• Separates fluids and combustion gases: Helps prevent leakage between adjoining passages and combustion chambers.
  
  These are the principal sealing duties of a cylinder head gasket. 
  
  Why Replace This Part?

Replacement is appropriate when inspection confirms leakage or damage at the cylinder-head joint, or when the head is removed for repair. Overheating, distorted mating surfaces or insufficient clamping force can compromise the seal. Fitting another gasket without correcting the underlying problem can leave the replacement exposed to the same conditions. 

During repair, the cylinder head and block sealing surfaces should be checked for damage and flatness. Follow the engine-specific requirements for surface preparation, fasteners and tightening, and investigate any cooling-system fault associated with previous overheating. 

When to Replace This Part?

• Confirmed joint leakage: Oil or coolant leakage has been traced to the cylinder-head gasket rather than a nearby seal or connection.
• Evidence of combustion leakage: Inspection reveals a damaged sealing area or tracks where combustion gases have escaped.
• Overheating damage: Inspection after overheating confirms gasket deterioration or distorted sealing surfaces requiring repair.
• Damage during dismantling: The removed gasket has damaged sealing areas and is unsuitable for refitting.
  
  Coolant loss or overheating alone does not establish that the gasket has failed; the cooling system and sealing joint need diagnosis. 
  
  Where Is This Part Fitted?

Location: Between the cylinder head and engine block of the 3.0L V6 petrol engine. Access requires cylinder-head removal; it is not an externally fitted cover seal.

Technical Details

• Cayenne application identifiers: 06EC, CGEA, CGE, CGFA and CJT.
• Panamera application identifiers: CGEA, CGE and CGFA.
  
  

Product Summary

• Product: Cylinder head gasket.
• Brand: OE Match.
• Purpose: Seals combustion chambers, oil passages and coolant passages at the cylinder-head joint.
• Repair context: Cylinder-head sealing repairs and engine rebuilding following inspection.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810314

The product you are viewing cross references to these numbers

Cylinder head gasket.

Fits:
Porsche 958 Cayenne HYBRID 3.0L 2011-18
Porsche 970 Panamera HYBRID 3.0L 2010-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810417

The product you are viewing cross references to these numbers

Housing cover gasket.

Fits:
Porsche 958 Cayenne Hybrid 2011-18
Porsche 970 Panamera Hybrid 2012-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810452110

The product you are viewing cross references to these numbers

O-ring 10x2.5N For Cylinder Head Choke.
Sold Each.

Fits:

Porsche 997.2 Carrera 3.6 / 3.8L MKII 2009>>2012
Porsche 997.2 Turbo 3.8L MKII 2010>>2013
Porsche 991.1 Carrera MKI 2012>>2016
Porsche 991.2 Carrera MKII 2017>>2019
Porsche 991 Turbo MKI / MKII 2014>>2020
Porsche 992.1 Carrera MKI 2019>>2024
Porsche 992.2 Carrera MKII 2025>>
Porsche 992 Turbo 2020>>
Porsche 987.2 Boxster MKII 2009>>2012
Porsche 987.2 Cayman MKII 2009>>2012
Porsche 981 Boxster 2012>>2016
Porsche 981 Boxster Spyder 2016
Porsche 982 Boxster 2017>>
Porsche 981 Cayman 2014>>2016
Porsche 981 Cayman GT4 2016
Porsche 982 Cayman 2017>>
Porsche 95B.1 Macan 3.0L / 3.6L MKI 2014>>2018
Porsche 957 Cayenne 4.8L 2007>>2010
Porsche 958 Cayenne 3.6L / 4.8L 2011>>2018
Porsche 970 Panamera 3.0L / 3.6L / 4.8L MKI / MKII 2009>>2016

Diagram Ref No 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A700827200

The product you are viewing cross references to these numbers

Seal ring washer. Size - A10 x 13.5

Fits:
Porsche 911 - 1978 to 1989
Porsche 964 - 1989 to 1994
Porsche 996 - 1998 to 2005
Porsche 997.1 - 2005 to 2008
Porsche 986 Boxster - 1997 to 2004
Porsche 928 - 1978 to 1995
Porsche 958 Cayenne - 2011 to 2018
Porsche 970 Panamera - 2010 to 2016
Porsche 95B Macan - 2014 to 2018

Aluminium seal washer - has various applications depending on model

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90012314430

The product you are viewing cross references to these numbers