适用于保时捷 911 >>1980 的凸轮轴螺母工具 - SR051
代码: SR051
保时捷 911 凸轮螺母工具
#斯托姆斯基#
这种高品质工具是迄今为止拆卸早期 911 发动机（到 1980 1/2 年）凸轮轴末端螺母的最佳方法。
12 点套筒精确地套在凸轮螺母（46 毫米）上，而凸轮支架则穿过套筒的中心 - 确保不会滑动、不会再有螺母损坏，并且更容易扭矩螺母。
黑色氧化物钢/铸件。
更换工厂工具 P202 和 P203。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR051
您正在查看的产品与这些编号存在交叉引用关系
#斯托姆斯基#
这种高品质工具是迄今为止拆卸早期 911 发动机（到 1980 1/2 年）凸轮轴末端螺母的最佳方法。
12 点套筒精确地套在凸轮螺母（46 毫米）上，而凸轮支架则穿过套筒的中心 - 确保不会滑动、不会再有螺母损坏，并且更容易扭矩螺母。
黑色氧化物钢/铸件。
更换工厂工具 P202 和 P203。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR051
90110517200
901105181
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€329.20
当前 €322.62
库存 
相关产品
Mounting bolt kit for engine & gearbox stand
代码: SR028
Mounting bolt kit for engine & gearbox stand
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
€77.78
当前 €76.22
库存
Connector removal tool - for VAG, Porsche
代码: 6547
Connector removal tool - for VAG, Porsche
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6547
您正在查看的产品与这些编号存在交叉引用关系
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6547
6547
您正在查看的产品与这些编号存在交叉引用关系
€37.78
当前 €37.02
库存
Connector removal tool long series - for VAG/Porsche
代码: 7859
Connector removal tool long series - for VAG/Porsche
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
7859
您正在查看的产品与这些编号存在交叉引用关系
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
7859
7859
您正在查看的产品与这些编号存在交叉引用关系
€23.16
当前 €22.70
库存
