赛车运动零件
按车型类型筛选
- Porsche 911 1965-1968 2.0L / 912 SWB(F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB(F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L 涡轮增压(930)
- Porsche 911 1978-1989 3.3L 涡轮增压(930)
按品牌过滤
2mm crown wheel spacer. Porsche 915 transmission
代码: CMS.915.RGS
This 2mm spacer ring allows for a much easier setup when retrofitting some differentials and or crown wheel and pinions within the 915 family.
Note
Longer ring gear bolts may be required
Note
Longer ring gear bolts may be required
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
€94.40
当前 €92.51
由供应商供货
915 Gearbox spray bar kit Porsche 915 or 930 transmission
代码: CMS.915.SBK
Our spray bar, made from stainless steel, is an excellent reproduction of the factory RSR spray bar. It allows for gear lube (presumably from a remote pump and cooler) to be returned directly to the gear mesh, including the final drive gears.
** This requires machining to the front "nose cone" housing.
We have updated our 915 spray bar kit to include an improved oil return port that will not interfere with the torsion bar tube and allows for better routing of the oil return line.
** This requires machining to the front "nose cone" housing.
We have updated our 915 spray bar kit to include an improved oil return port that will not interfere with the torsion bar tube and allows for better routing of the oil return line.
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€1,136.34
当前 €1,113.61
由供应商供货
Bearing retaining plate 901 gearbox. Porsche 911/901 transmissions
代码: 90130125101/1
Fits all Porsche 901/911/912 aluminum case transmissions.
Precision machined from 4130 Chromoly
Better supports both main and pinion shaft bearings
Improved design captures the main shaft bearing 45% more than OEM
Substantial clearance provided for even non-standard tall 1st gear ratios
Perfect fit for bearings and assembly
Much stronger than the original cast part
Replaces part 901.301.251.01 tensioning plate
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90130125101
您正在查看的产品与这些编号存在交叉引用关系
Precision machined from 4130 Chromoly
Better supports both main and pinion shaft bearings
Improved design captures the main shaft bearing 45% more than OEM
Substantial clearance provided for even non-standard tall 1st gear ratios
Perfect fit for bearings and assembly
Much stronger than the original cast part
Replaces part 901.301.251.01 tensioning plate
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90130125101
90130125101
901.301.251.01
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€270.22
当前 €264.82
由供应商供货
Bearing retaining plate 915 gearbox. Porsche 911/915 transmissions 1972-86
代码: 91530212303/1
Bearing retaining plate for 915 transmissions
Fits:
Porsche 911 '72-'86 (Not for 4-speed gearboxes)
- Precision machined
- Better support for both the main and pinion shaft bearings
- Improved design incorporates an oil groove promoting more lubrication to the input shaft bearings
- Substantial clearances for ease of assembly
- Perfect fit for bearings and assembly
- Much stronger than the original cast two piece design
Replaces parts 915 302 121 03 and 915 302 123 03
Notes:
Do not use the factory lock washers.
For use only with the 4mm flange 4 point pinion bearing 999.052.030.00
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530212303
915.302.121.03
915.302.123.03
91530212103
91530212303
9153021230
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
€312.82
当前 €306.56
库存
Bearing retaining Porsche 930 4 speed transmission
代码: 93030212100/1
Fits all Porsche 930 4 speed transmissions
Precision machined
Improved design incorporates an oil groove promoting more lubrication to the input shaft bearings (some modification required to bell housing and shims)
Substantial clearances for ease of assembly
Perfect fit for bearings and assembly
Much stronger than the original cast part
Replaces part 930.302.121.00
Note: Do not use the factory lock washers in conjunction with our supplied hardware.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93030212100
您正在查看的产品与这些编号存在交叉引用关系
Precision machined
Improved design incorporates an oil groove promoting more lubrication to the input shaft bearings (some modification required to bell housing and shims)
Substantial clearances for ease of assembly
Perfect fit for bearings and assembly
Much stronger than the original cast part
Replaces part 930.302.121.00
Note: Do not use the factory lock washers in conjunction with our supplied hardware.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93030212100
930.302.121.00
93030212100
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€284.38
当前 €278.69
由供应商供货
Billet steel conversion driveshaft / axle flanges. Porsche 911 / 914
代码: CMS.914.18T
Finally, conversion axle flanges for early 911s and 914s. These are machined in house from 4340 billet steel and heat treated.
Our custom "coarse spline/18 spline" drive flanges will allow 930 or G50 CV joints (with metal grease caps) to bolt up to the early 1969-75 911s and all 914 transaxles.
Shaft length was designed with the stock open diff in mind. If by off-chance you have a factory LSD, spacers will be required.
Sold in pairs.
Fits
Porsche 911 - 1969 to 1975
Porsche 914
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
CMS.914.18T
您正在查看的产品与这些编号存在交叉引用关系
Our custom "coarse spline/18 spline" drive flanges will allow 930 or G50 CV joints (with metal grease caps) to bolt up to the early 1969-75 911s and all 914 transaxles.
Shaft length was designed with the stock open diff in mind. If by off-chance you have a factory LSD, spacers will be required.
Sold in pairs.
Fits
Porsche 911 - 1969 to 1975
Porsche 914
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
CMS.914.18T
90133223200
PCG33222300
91433222301
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€1,292.10
当前 €1,266.26
由供应商供货
Billet steel driveshaft / axle flanges for 930 transaxles and 1978 onwards 915
代码: 93033223200/1
Machined in house from 4340 steel and heat treated.
For all 930 4 speed applications and 1978 and later 915.
Spacers are required if you are using with a factory LSD.
Replaces part 930-332-209-12
Sold in pairs.
Notes:
Factory LSD applications will require spacers, otherwise the flanges will be too short.
Designed for use with metal CV gaskets, not paper.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93033223200
您正在查看的产品与这些编号存在交叉引用关系
For all 930 4 speed applications and 1978 and later 915.
Spacers are required if you are using with a factory LSD.
Replaces part 930-332-209-12
Sold in pairs.
Notes:
Factory LSD applications will require spacers, otherwise the flanges will be too short.
Designed for use with metal CV gaskets, not paper.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93033223200
93033223200
930.332.232.00
923.332.232.01
93033223200
92333223201
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€1,292.10
当前 €1,266.26
由供应商供货
离合器拨叉枢轴凸台维修。保时捷 911 / 964 / 993 / 996 / 997
代码: 9XXGFIX
固定离合器分离叉枢轴的一个或两个凸台破裂或折断导致离合器无法工作的情况并不少见。这是一个维修套件,需要进行一些机械加工和拆卸重建,才能专业地维修您的钟形罩,而费用只是更换外壳或整个变速器的一小部分。993 钟形罩仍不再可用。
我们目前的版本使用硬件重新连接新的凸台,而不是焊接,这使得未来的更换更加容易。这是业内最干净的维修。
使用当前版本的枢轴和叉组件。
#罗勒#
适用于所有 G50、G64、993、996T/997T、996/997 GT2/GT3 变速器。
G50、G50/00、G50/01、G50/50、G50/03、G50/04、G50/05、G50/52、G64/00、G64/01、G50/20、G50/21、G50/31、G50/32、G50/33、G64/51、G64/52、G96/50、G96/88、G96/90、G96/92、G96/96、G96/97、G95/50、G97/88、G97/96
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9XXGFIX
您正在查看的产品与这些编号存在交叉引用关系
我们目前的版本使用硬件重新连接新的凸台,而不是焊接,这使得未来的更换更加容易。这是业内最干净的维修。
使用当前版本的枢轴和叉组件。
#罗勒#
适用于所有 G50、G64、993、996T/997T、996/997 GT2/GT3 变速器。
G50、G50/00、G50/01、G50/50、G50/03、G50/04、G50/05、G50/52、G64/00、G64/01、G50/20、G50/21、G50/31、G50/32、G50/33、G64/51、G64/52、G96/50、G96/88、G96/90、G96/92、G96/96、G96/97、G95/50、G97/88、G97/96
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9XXGFIX
95011608606
99711608690
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
€295.00
当前 €289.10
库存
Cover plate gearbox oil pump. Porsche 911 2.7 RS / RSR
代码: 9153073032R/1
Cover plate gearbox oil pump.
Fits:
Porsche 911 2.7 RS / RSR Race car
For 915 race (5 speed) gearbox
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9153073032R
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 2.7 RS / RSR Race car
For 915 race (5 speed) gearbox
Click 'Zoom in' for large parts diagram.
This item replaces diagram ref no 10
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9153073032R
91530703300
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
€2,419.00
当前 €2,346.43
由供应商供货
Gearbox 5th gear/reverse shift fork. Porsche 915 transaxles 72-86
代码: 91530311301/1
Direct replacement for NLA Porsche part 915.303.113.01 our 5th/reverse shift fork is an excellent reproduction made in house from 6061 T6 billet aluminium.
Our design features a replaceable steel threaded insert for the bolt in the event the threads should ever strip.
Fits all Porsche 915 transaxles 72-86
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530311301
您正在查看的产品与这些编号存在交叉引用关系
Our design features a replaceable steel threaded insert for the bolt in the event the threads should ever strip.
Fits all Porsche 915 transaxles 72-86
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530311301
915.303.113.01
91530311301
91530311301
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
€450.76
当前 €441.74
由供应商供货
Gearbox 901 side cover plate Porsche 911 / 912 swb 1965-68 some early 1969 models with "chilled casting".
代码: 90130131101/1
At last, a strengthened side plate for the early aluminium case 901 transmissions! Fits all vintage Porsche 911 and 912 short wheel base cars '65-'68 some early '69 models with "chilled casting".
Precision machined from aircraft grade billet aluminium to exacting standards for perfect fit and function
Oil passageway for standard taper roller bearing
Replaceable clutch cable bracket
Uses rubber o-ring instead of paper gasket (part 113.301.185a included)
Uses standard differential taper roller bearing 999.059.027.00
Note: The cover is thicker than the original and therefore requires longer studs to be installed. We include a new set.
Replaces part 901.301.311.01
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90130131101
您正在查看的产品与这些编号存在交叉引用关系
Precision machined from aircraft grade billet aluminium to exacting standards for perfect fit and function
Oil passageway for standard taper roller bearing
Replaceable clutch cable bracket
Uses rubber o-ring instead of paper gasket (part 113.301.185a included)
Uses standard differential taper roller bearing 999.059.027.00
Note: The cover is thicker than the original and therefore requires longer studs to be installed. We include a new set.
Replaces part 901.301.311.01
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90130131101
90130131101
901.301.311.01
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€466.10
当前 €456.78
库存
Gearbox G50 oil pickup adaptor. Porsche G50’s 1987-98 except C4 5 speed
代码: 95030137100/1
Allows you to scavenge oil from the side of a G50 5 or 6 speed transmission bell housing using the factory "blank" in the casting.
While some models are machined from the factory, some will need additional machine work. This is a great solution for a G50 car with low ground clearance that needs an oil cooler.
Machined in house from 6061 billet aluminum
Nicely beveled edges; high attention to detail
VDO 300F temp sender included
-8AN adapter included
Mounting hardware included
For all G50's '87-'98 except C4 5 speed
Not for inverted/mid engine gearboxes
G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/20, G50/21, G50/31, G50/32, G50/33, G64/51, G64/52
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030137100
您正在查看的产品与这些编号存在交叉引用关系
While some models are machined from the factory, some will need additional machine work. This is a great solution for a G50 car with low ground clearance that needs an oil cooler.
Machined in house from 6061 billet aluminum
Nicely beveled edges; high attention to detail
VDO 300F temp sender included
-8AN adapter included
Mounting hardware included
For all G50's '87-'98 except C4 5 speed
Not for inverted/mid engine gearboxes
G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/20, G50/21, G50/31, G50/32, G50/33, G64/51, G64/52
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030137100
95030137100
950.301.37100
95030137100
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
€336.30
当前 €329.57
库存
Gearbox side cover plate 915 gearbox. Porsche 911 1972-86
代码: 91530131105/1
Upgrading from the stock 915 side cover will add strength and reliability to your gearbox.
Precision machined from T6 aluminum
Superior in strength as compared to all OEM side plates
Uses larger 930 Turbo differential taper bearing (999.059.064.00 sold separately)
Oil passageway for additional lubrication to the diff bearing
Perfect fit/no clearance issues
Adds strength and reliability to the diff section by reducing ring gear deflection
Perfect for racing and V8 applications
Fits all 915 transmissions '72-'86 excluding Euro models with oil cooler
Replaces parts 915.301.311.00, 915.301.311.04, 915.301.311.05, 915.302.311.06
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530131105
您正在查看的产品与这些编号存在交叉引用关系
Precision machined from T6 aluminum
Superior in strength as compared to all OEM side plates
Uses larger 930 Turbo differential taper bearing (999.059.064.00 sold separately)
Oil passageway for additional lubrication to the diff bearing
Perfect fit/no clearance issues
Adds strength and reliability to the diff section by reducing ring gear deflection
Perfect for racing and V8 applications
Fits all 915 transmissions '72-'86 excluding Euro models with oil cooler
Replaces parts 915.301.311.00, 915.301.311.04, 915.301.311.05, 915.302.311.06
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530131105
915.301.311.00
915.301.311.04
915.301.311.05
915.302.311.06
91530131100
91530131104
91530131105
91530231106
91530131105
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
€547.76
当前 €536.80
库存
Gearbox side cover plate G50 5 speed 1987-89 Porsche 911
代码: 95030131204/1
Specifically made for the early G50 5 speed '87-'89 transmission our billet aluminum side cover replaces the thin cast cover that is prone to failure.
Ours is beautifully pocketed and even allows for use of the OEM speed sensor and bracket.
For use with the standard studs, o-ring, axle seal and differential bearing.
Fits G50/00, G50/01, G50/02
Replaces part 950.301.312.04
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030131204
您正在查看的产品与这些编号存在交叉引用关系
Ours is beautifully pocketed and even allows for use of the OEM speed sensor and bracket.
For use with the standard studs, o-ring, axle seal and differential bearing.
Fits G50/00, G50/01, G50/02
Replaces part 950.301.312.04
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030131204
950.301.312.04
95030131204
95030131204
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
€607.70
当前 €595.55
库存
Gearbox side cover plate Porsche 911 1970-71
代码: 90130131112/1
Our billet aluminum differential side cover is much stronger than the factory magnesium counterpart and will help reduce gear deflection under load.
Our version uses the larger 930 turbo taper bearing and features a replaceable clutch cable bracket.
You must use differential bearing 999.059.064.00
You can use the stock studs, axle seal, o-ring and factory preload setting.
Fits Porsche 911 70-71 side cover with clutch cable bracket for pull clutch
Replaces part: 901.301.311.12
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90130131112
您正在查看的产品与这些编号存在交叉引用关系
Our version uses the larger 930 turbo taper bearing and features a replaceable clutch cable bracket.
You must use differential bearing 999.059.064.00
You can use the stock studs, axle seal, o-ring and factory preload setting.
Fits Porsche 911 70-71 side cover with clutch cable bracket for pull clutch
Replaces part: 901.301.311.12
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90130131112
90130131112
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€470.82
当前 €461.40
库存
Gearbox side cover Porsche 930 4 speed transmission
代码: 93030131102/1
The original Porsche 930 transmission differential side cover is made of cast aluminum, not to mention it's pretty thin.
Under load there can be a tremendous force applied to this cover, and it can break, sometimes resulting in a damaged ring and pinion-or worse.
Upgrading to a billet side plate will add significant strength and increased reliability to the differential section.
Our design features include:
A ring gear thrust bolt to reduce ring gear deflection under load
Ports that can be used for an oil cooling system
Cross drilled oil passageways for the differential bearing
Comes with (3) 3/4 - 16 O ring plugs.
Replaces part 930.301.311.02
930/30, 930/33, 930/34, 930/36, 930/37, 930/67
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93030131102
您正在查看的产品与这些编号存在交叉引用关系
Under load there can be a tremendous force applied to this cover, and it can break, sometimes resulting in a damaged ring and pinion-or worse.
Upgrading to a billet side plate will add significant strength and increased reliability to the differential section.
Our design features include:
A ring gear thrust bolt to reduce ring gear deflection under load
Ports that can be used for an oil cooling system
Cross drilled oil passageways for the differential bearing
Comes with (3) 3/4 - 16 O ring plugs.
Replaces part 930.301.311.02
930/30, 930/33, 930/34, 930/36, 930/37, 930/67
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93030131102
93030131102
930.301.311.02
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€712.72
当前 €698.47
由供应商供货
Hydraulic slave cylinder kit 915 gearbox. Porsche 911 1972-86
代码: 95011623712/2
We can provide bolt on hydraulic slave cylinder for your Porsche 911 915 transaxle eliminating all the woes that come with a clutch cable. It can be used for both upright and inverted applications - especially nice for mid engine conversions.
Includes clutch arm, cable clevis, slave cylinder, spacer, seals and our billet slave cylinder bracket with bolts. This requires the use of the 1978 and earlier clutch fork pivot shaft.
Note: This requires a portion of the rib on the bottom of the transmission that holds the original clutch cable to be cut away on 72-77 models. To go back to a cable configuration if one so chooses can be done with a bolt on bracket.
A 3/4" clutch master cylinder is recommended - not included.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95011623712
您正在查看的产品与这些编号存在交叉引用关系
Includes clutch arm, cable clevis, slave cylinder, spacer, seals and our billet slave cylinder bracket with bolts. This requires the use of the 1978 and earlier clutch fork pivot shaft.
Note: This requires a portion of the rib on the bottom of the transmission that holds the original clutch cable to be cut away on 72-77 models. To go back to a cable configuration if one so chooses can be done with a bolt on bracket.
A 3/4" clutch master cylinder is recommended - not included.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95011623712
95011623712
950.116.237.12
95011623712
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
€855.50
当前 €838.39
由供应商供货
Hydraulic slave cylinder kit. Porsche 930 4 speed
代码: 95011623714/2
We can provide bolt on hydraulic slave cylinder for your Porsche 911 930 4 speed transaxle eliminating all the woes that come with a clutch cable. It can be used for both upright and inverted applications - especially nice for mid engine conversions.
Includes clutch arm, cable clevis, slave cylinder and our billet slave cylinder bracket with bolts. Please specify if your application is using a short bell housing or long bell housing transaxle as the pivot shafts for the release fork are different. We must modify the arm if you have a long bell housing transmission.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95011623714
您正在查看的产品与这些编号存在交叉引用关系
Includes clutch arm, cable clevis, slave cylinder and our billet slave cylinder bracket with bolts. Please specify if your application is using a short bell housing or long bell housing transaxle as the pivot shafts for the release fork are different. We must modify the arm if you have a long bell housing transmission.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95011623714
95011623712
950.116.237.12
95011623714
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€850.78
当前 €833.76
由供应商供货
Intermediate plate 901 gearbox. Porsche 911/901 transmissions
代码: 90130122100/1
Replacing part for 911.301.221.00 (no longer available). Made in house from billet 6061 to correct tolerances.
Genuine Porsche bearings are recommended
Fits 911/912 64-69.5 aluminium case 901 transmissions.
90130122100, 901-301-221-00
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90130122100
您正在查看的产品与这些编号存在交叉引用关系
Genuine Porsche bearings are recommended
Fits 911/912 64-69.5 aluminium case 901 transmissions.
90130122100, 901-301-221-00
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90130122100
90130122100
901.301.221.00
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€569.94
当前 €558.54
由供应商供货
Oil scavenge port fork cover plate. Porsche 915 or 930 transmission
代码: 91530302302/1
Our billet fork cover plate replaces part 915.303.023.02 and will allow you to scavenge oil without having to drill, tap or weld to the case. Within the oil passageway is a temp sender provision that is usable even when not utilizing the scavenge port.
Features:
Proper knock off tabs/pry points for easy removal
300F VDO temp sender included
-8AN oil scavenge port (-8AN adapter included)
Uses your existing fork, studs and dowel pins
Uses stock paper gasket
Fits all Porsche 915 and 930 transmissions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530302302
您正在查看的产品与这些编号存在交叉引用关系
Features:
Proper knock off tabs/pry points for easy removal
300F VDO temp sender included
-8AN oil scavenge port (-8AN adapter included)
Uses your existing fork, studs and dowel pins
Uses stock paper gasket
Fits all Porsche 915 and 930 transmissions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530302302
915.303.023.02
91530302302
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€427.16
当前 €418.62
由供应商供货
Selector fork 1ST/2ND Gear shift fork. Porsche 911 1987-94
代码: 95030311101/1
The weakest and most commonly broken shift fork in the G50 5 speed transaxle is the cast aluminium 1st/2nd shift fork.
Our newly designed fork is CNC machined beautifully from aircraft grade billet aluminium and offers the most strength over any fork in the aftermarket. Our fork will also promote enhanced lubrication to 2nd gear as it better captures the idler gear when engaged.
Fits all G50 5 speed Porsche transmissions '87-'94.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01)
Replaces part 95030311101
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030311101
您正在查看的产品与这些编号存在交叉引用关系
Our newly designed fork is CNC machined beautifully from aircraft grade billet aluminium and offers the most strength over any fork in the aftermarket. Our fork will also promote enhanced lubrication to 2nd gear as it better captures the idler gear when engaged.
Fits all G50 5 speed Porsche transmissions '87-'94.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01)
Replaces part 95030311101
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030311101
95030311101
950.303.111.01
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
€536.90
当前 €526.16
库存
Selector fork 1ST/2ND Gear shift fork. Porsche 915 or 930 transmission
代码: 91530311100/1
A direct replacement for part 915.303.111.00 and 930.303.110.02.
Machined from 6061 T6 aluminium; features a replaceable threaded insert for the supplied bolt.
Fits all Porsche 915 transaxles 72-86 and 930 4 speed transaxles 76-88.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530311100
您正在查看的产品与这些编号存在交叉引用关系
Machined from 6061 T6 aluminium; features a replaceable threaded insert for the supplied bolt.
Fits all Porsche 915 transaxles 72-86 and 930 4 speed transaxles 76-88.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530311100
91530311100
93030311002
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€450.76
当前 €441.74
由供应商供货
Selector fork 3rd/4th Gear shift fork. Porsche 915 or 930 transmission
代码: 91530211200/1
If you are rebuilding a Porsche 915 or 930 transmission it's likely the 3rd/4th shift fork is worn out.
Replacing factory part numbers 915.302.112.00 and 930.303.112.02 our part is made in house from 6061 T6 aluminum - and incorporates replaceable grade 10 hardware in the event the threads should strip.
Fits all 915 transmissions '72-'86 and all 930 transmissions '76-'88.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530211200
您正在查看的产品与这些编号存在交叉引用关系
Replacing factory part numbers 915.302.112.00 and 930.303.112.02 our part is made in house from 6061 T6 aluminum - and incorporates replaceable grade 10 hardware in the event the threads should strip.
Fits all 915 transmissions '72-'86 and all 930 transmissions '76-'88.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530211200
915.302.112.00
91530211200
93030311202
930.303.112.02
93030311203
930.303.112.03
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€450.76
当前 €441.74
库存
Selector fork 3RD/4TH Gear shift fork. Porsche 993 C2/C4/Turbo transmissions 1995-98
代码: 95030311304/1
The factory cast aluminum 993 fork suffers from an inherent weakness in which the steel insert that the reverse lever actuates - is prone to failure.
The cast steel RS fork does not have this issue but it's not a billet steel one like ours...and it's less expensive.
Fits all G50 5 speed transmissions '87-'94 and all G50 6 speed transmissions '95-'98 including C4, RS, Turbo and RSR models.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01, G50/20, G50/21, G50/31, G50/31, G50/33, G64/51, G64/52)
Replaces part 950.303.113.04, 950.303.103.00, 950.303.113.04, 950.303.103.06
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030311304
您正在查看的产品与这些编号存在交叉引用关系
The cast steel RS fork does not have this issue but it's not a billet steel one like ours...and it's less expensive.
Fits all G50 5 speed transmissions '87-'94 and all G50 6 speed transmissions '95-'98 including C4, RS, Turbo and RSR models.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01, G50/20, G50/21, G50/31, G50/31, G50/33, G64/51, G64/52)
Replaces part 950.303.113.04, 950.303.103.00, 950.303.113.04, 950.303.103.06
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030311304
95030311304
950.303.113.04
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
€850.78
当前 €833.76
由供应商供货
Shift fork – reverse gear and fifth gear. Porsche 915 transaxles 72-86
代码: 91530311301/2
Shift fork – reverse gear and fifth gear.
Fits:
Porsche 911 F (1972 to 1973) and
Porsche 911 G (1974 to 1986) that are equipped with a 915 transmission (excluding Turbo)
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530311301
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 F (1972 to 1973) and
Porsche 911 G (1974 to 1986) that are equipped with a 915 transmission (excluding Turbo)
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91530311301
15479
915.303.113.01
91530311301
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
€153.40
当前 €148.80
库存
Tensioning plate. Porsche 911 Turbo 75-88 / 924 78-79
代码: 93030212101
Tensioning plate.
Fits:
Porsche 924 1978-1979 Only for 5-speed transmission
Porsche 911 G Turbo 1975-88 Only for 4-speed transmission
Click 'Zoom in' for large parts diagram.
Diagram ref no 21
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93030212101
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 924 1978-1979 Only for 5-speed transmission
Porsche 911 G Turbo 1975-88 Only for 4-speed transmission
Click 'Zoom in' for large parts diagram.
Diagram ref no 21
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93030212101
93030212101
93030212100
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
价格: €365.25
库存
Throw out bearing guide tube update or repair Porsche 915 or 930 transmission
代码: CMS.915.GT
This update will allow for use of the late style 915 main shaft seal and o-ring on early transmissions ('72-'75) where the seal installs from the inside and the guide tube is not removable.
The update is a also good repair for those whom have loose, damaged or worn out guide tubes.
** This requires machining to fit
The original is machined off and a custom steel tube is fitted. It's further retained from the inside of the diff case with a high quality snap ring and sealed with the factory o-ring.
The update is a also good repair for those whom have loose, damaged or worn out guide tubes.
** This requires machining to fit
The original is machined off and a custom steel tube is fitted. It's further retained from the inside of the diff case with a high quality snap ring and sealed with the factory o-ring.
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€464.68
当前 €455.39
由供应商供货
显示从1到27(共27个产品)
也可在这些页面找到
您可能也喜欢
流行车型