进气口套件
Cooler air = MORE POWER + 8-10BHP.
Cone filters have superior air flow characteristics as compared to flat panel filters. The cone filter better structures the air as it enters through the filter and the additional intake length and shape of this system further increases air flow for smoother straighter more formed air.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99316700
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
The Porsche 993 RS 1996-98 WITH STANDARD REAR SPOILER , the factory ductwork is replaced with heat-shielding carbon fiber with enhanced inlets to capture the maximum amount of air. Lower intake air temperatures carry higher concentrations of oxygen, allowing for more energetic explosions and producing more horsepower and torque. Of course, reliability is never sacrificed -- high-efficiency, high-flow air filter materials prevent contaminants from interfering with proper engine function.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9931679932
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) RS 1994-97
本产品适合:
保时捷 993 Carrera / 993 Turbo
面板过滤器尺寸:
宽度240毫米
- 高度 - 325毫米
BMC 空气过滤器的设计和生产确保比原始纸质过滤器更高的空气流量。例如,在 F1 中,BMC 棉质过滤器最大限度地减少了通过空气过滤器的气流压力损失;这样可以确保充分利用最大功率的最佳条件。因此,使用与 F1 空气过滤器相同的技术和材料生产的 BMC 棉质空气过滤器替换原始纸质过滤器的好处是显而易见的。
设计和材料
合格的工程师使用先进的软件,专业技术人员使用最新技术生产 BMC 空气过滤器。F1 过滤器必须非常轻,必须由最好的原材料制成,并且必须提高性能。为此,我们只使用带环氧涂层的合金网,以确保免受汽油烟雾和空气湿度氧化的影响。过滤材料由浸有低粘度油的特殊棉纱布制成,可为您提供最佳的透气性。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
FB136
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
964 Ventilation Kit includes:
- Distributor ventilation connection (A)
- Rubber Grommet (B)
- White Grommet connector (C)
- Hose (D)
HOW TO FIT: Firstly prise of the oval plate arrowed on the distributor with a screwdriver. Then remove the large black air guide pipe as we need to drill a hole in it at the green dot. The pipe removes by loosening jubilee clips at top and bottom. You will also need to remove two sensor connectors on the pipe. I also removed the two sensors near the distributor so that I had easy access to the plate. Drill at 18mm hole in the pipe, 40mm to the right of the tail light ventilation nipple. Deburr the hole and remove all shavings. Install the rubber grommet (B) into the hole and install the white connector (C) into the grommet.Install the distributor connector (A) into the hole in the distributor where the plate was. Finally refit the air pipe and connect back up all the sensors. Install the hose (D) onto the new distributor and air pipe nipples and route
Fits:
Porsche 964 1990-94
Porsche 993 1995-97
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
The Porsche part is ugly roto-formed cheap plastic with parting lines whereas accurate replica is carbon fiber.
Saves 8 to 9lbs about 4Kg from the rear of all 964's and 993's. Will not work on C2 Turbos/965 cars.
Replaces blower motor assembly and ductwork and still allows plenty of heat just like the factory RS part.
Ultra cool clear coated real carbon fiber tube that really cleans up engine bay and makes working on engine easy.
Simple do it yourself 20 minute installation that gives you the RS style engine look.
All late model 993's 1996-98 require the 964 early type fan shroud (as shown on exploded image)
Can be added below
fits:
Porsche 964 C2/C4 1989-1994
Porsche 993 C2/C4 1994-1997
To see a video about this product Click Here
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
964167003
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
FEATURES:
• Fits all Porsche 993 vehicles (1994-1998)
• Adds 8 whp and improves throttle response and sports car sound
• Optional BMC Air Filter upgrade available
• Simple DIY installation; installs in 5 minutes!
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
FSPOR993ABX
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
本产品适合:
保时捷 993 3.6L 1993-97
保时捷 993 3.8L 1995-97
K&N® 可清洗、可重复使用的高流量空气过滤器™ 具有最先进的分层油棉介质设计,旨在改善气流和捕获污染物,并旨在提高马力。
每个高性能空气过滤器均可重复使用,使用寿命可延长至您车辆的整个使用寿命,并享有 K&N 的 10 年/百万英里有限保修。
K&N 插入式替换过滤器设计用于轻松安装到您的工厂空气箱中。
与原始设备制造商车辆电子设备合作。
环保型 K&N 可重复使用空气过滤器
立即升级并开始享受 K&N 最受欢迎产品的卓越气流和卓越性能!
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
33-2731
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
可适配多种车辆。
过滤器高度:6 英寸/15厘米
底部过滤器直径: 7 英寸/18 厘米
漏斗高度:8 英寸/20厘米
底部过滤器直径: 3.5 英寸 / 9 厘米
整体高度: 13 英寸/33 厘米