运动消音器/消声器
#米尔泰克#
管道直径:2.26 英寸(57.50 毫米)
适合:
保时捷 911 (997.2) 3.6L 和 3.8L (C2 / C4 / S / GTS) 2009-2012 年
零件组装:
MSPO247:中央消音器删除组件
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Fits:
Porsche 997 II 3.6L C2 / C4 2009-
Porsche 997 II 3.8L C2S / C4S 2009-
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99722097331S
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Made from high quality T304 14-16 gauge stainless steel, C.N.C. mandrel bent. The X-Pipe (primary muffler bypass) gives a great exotic car sound and power by about 5 decibels.
Fits:
Porsche 997 MKII
Click 'Zoom in' for large parts diagram.
3606009719 replace No 10.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3606009719
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Fits:
Porsche 997.2 3.6L - 3.8L Carrera 06/2008 - 12/2012
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1620613810
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Fits:
Porsche 997.2 3.6L - 3.8L Carrera 06/2008 - 12/2012
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1620613710
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
This sports centre sections is a direct bolt on replacement, you don't even need to removal of bumper, Proprietary megaphone design- mandrel bent tubing which saves 14 lbs over the stock center section ( GT3 , RS with Ti center muffler saves 5 lbs )
Sport button remains fully functional for every day use, absolutely NO modifications. This system offers a deep aggressive exhaust note over the Porsche stock system the factory primary mufflers, catalyst and exhaust flaps are all retained
The DesignTek Sport Center Section system is a direct bolt on replacement center section which reduces weight, improves sound and offers a mild increase in performance. Porsche has done a wonderful job with the design and manufacture of the factory system with virtually no improvement to be made by installing a complete (mufflers, headers and cats) aftermarket system.
Direct bolt on replacement center section with dual 3.5 stainless tips (factory offers dual 3"). The system is made of mandrel bent T304 stainless tubing which is TIG welded and features a proprietary megaphone design to improve sound in the upper RPM range. The system saves over 14 lbs of weight over the stock ( stock gt3) and (5 lbs over GT3RS with Ti muffler), power is up 3-5 hp on average and now the sound is finally worthy of this magnificent engine.
Fits:
Porsche 997 GT3 / GT3RS 2007>>
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3606609717
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
Road Version gives a great deep sound which every Porsche driver desires
This rear cat back system fit to the OE factory cats and tail pipes.
Fits:
Porsche 997 Turbo Gen2 2010>>
Porsche 997 Turbo S Gen2 2010>>
Click 'Zoom in' for large parts diagram.
3606009748 replace No 1.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3606009748
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MKII Turbo 2009>>
Rear silencer including reduced cell catalytic converter
Fits:
Porsche 997 GT2 and GT2 RS 2007-2012
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light
REDUCED CELL CATALYTIC CONVERTER - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers
- Porsche 997 GT2 2007>>
- Porsche 997 MKII GT2 RS 2011>>
Replaces rear silencer with straight through pipe
Fits
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)
This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Replaces rear centre exhaust silencer
Fits:
Porsche 997 Gen 2 Carrera and Carrera S
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
PIPE FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system.
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Porsche 997.2 turbo and turbo S 2010-2013
Fits
Porsche 911 turbo 997 Gen 2
Porsche 911 turbo S 997 Gen 2
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
CATALYTIC CONVERTER REMOVAL
This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound
ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
MAIN PIPE DIMENSION 65mm
This is the diameter of the main pipe of the exhaust system
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
- Porsche 997 MKII Turbo 2009>>
Porsche 997.2 turbo and turbo S 2010-2013
Fits
Porsche 911 turbo 997 Gen 2
Porsche 911 turbo S 997 Gen 2
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
CATALYTIC CONVERTER REMOVAL - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound
ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
MAIN PIPE DIMENSION 65mm
This is the diameter of the main pipe of the exhaust system
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
- Porsche 997 MKII Turbo 2009>>
Replaces rear centre exhaust silencer and side silencer. This exhaust does not come with new tail pipes. Original tips will be compatible.
Fits
2 and 4wd cars
Porsche 997 Gen 2 Carrera
Porsche 997 Gen 2 Carrera S
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
EXHAUST SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Replaces side silencers. This exhaust does not come with new tail pipes. Original tips will be compatible.
Fits Porsche 997 Gen 2 Carrera and Carrera S
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
EXHAUST SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
The system utilises the factory cats and factory tail pipes
Fits:
Porsche 997 Turbo MKII 2009>>
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3606009749
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MKII Turbo 2009>>
标题:升级保时捷排气系统:原装保时捷与售后消声器和运动型排气系统
关键词:保时捷、排气消声器、运动型排气、升级、更换、技术规格、已知问题、Design911、专业建议
概括:
原装保时捷排气消声器:
由保时捷为特定车型设计和制造
按照严格的质量标准设计
精确调整以获得最佳性能和声音
保持保时捷的真实性和原创性
与现有组件和系统兼容
售后排气消声器:
由专门从事性能升级的第三方制造商生产
提供多种定制选择
可以增强排气音、性能和美观度
可以提供更好的流动动力学以提高发动机效率
考虑与您的保时捷车型的兼容性和适合性
运动型排气系统:
旨在最大程度提高性能并增强驾驶体验
通常包括更大直径的管道、更具运动感的消声器和优化的气流
提供更大的马力和扭矩
产生更具侵略性和令人振奋的排气声音
查看当地有关噪音限制的法规
在考虑为您的保时捷购买排气消声器或运动型排气管时,应考虑几个因素。首先,确定您的具体要求,无论是声音的轻微改善还是性能的显著提升。研究所选排气系统与您的保时捷车型的技术规格和兼容性。考虑您的预算和制造商或零售商的声誉。确保产品有保修或担保至关重要。
在 Design911,我们可以帮助您找到适合您的保时捷的排气管部件。我们知识渊博的团队可以根据您的要求提供专业建议,并指导您完成选择过程。我们备有各种原装保时捷零件以及信誉良好的售后市场选项,确保您能够获得高质量的选择。相信 Design911 可以帮助您提升保时捷的性能并提供无与伦比的驾驶体验。
注意:以上摘要概述了升级保时捷车辆排气系统的好处和注意事项。在进行任何修改之前,始终建议咨询专业人士并考虑个别车辆的规格和法规。