Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.co.uk/images/schemaLogo.png https://www.design911.co.uk/images/schemaLogo.png +443456003478 https://www.design911.co.uk Facebook Instagram

Retro Line

Retro Line
About Retro Line

Retro Line for Porsche

Retro Line parts for Porsche at Design911 focus on interior and exterior details that keep a period-correct look while subtly updating usability, comfort, and style

A Quick Look at Retro Line

Information about Retro Line on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.

Choosing the Right Fit for Your Porsche

Where Retro Line is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.

  • Typical reasons to choose Retro Line include refreshing faded trim, updating small details and building a sympathetic restomod that still looks in keeping with a classic Porsche.
  • Common issues when changing these parts include faded finishes, cracked plastics, rattles, and fitment differences between model years, often made worse by reusing old clips and fixings.
  • Confirm your exact model year and interior or exterior layout before ordering, as small design changes between generations can affect how well parts fit.
  • Many upgrades are designed to blend in visually and can usually be reversed later if you keep your original Porsche parts and hardware.

Browse by Category

If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.

Accessories — Porsche accessories are typically chosen to add practicality, comfort or a personal touch, from storage and mounts to subtle styling pieces; where Retro Line options are offered, they aim to complement the factory interior and trim rather than look out of place.

  • Check whether accessories need drilling or permanent modification, and whether they can later be removed without marks.
  • Always confirm compatibility with your specific Porsche model, interior type and any factory options before ordering.

Badges & Emblems — Badges and emblems are often refreshed to replace faded, chipped or missing items and to fine-tune the exterior look; Retro Line pieces in this area are intended to sit comfortably alongside original Porsche styling.

  • Confirm how a badge is fixed (adhesive, clips or pins) and whether it matches the original mounting points on your Porsche.
  • Take time to remove old adhesive carefully to avoid scratching surrounding paint or trim.

Rear / Boot lid Badges — Rear boot-lid badges help define the identity of your Porsche; replacements are fitted when original lettering has faded, lost chrome or been disturbed during paintwork or repairs.

  • Check whether new badges are supplied as individual letters or a complete script, and whether templates or tape are included for alignment.
  • Ensure old adhesive is fully removed and the surface is clean so the new badge sits level and adheres correctly.

Side Decals / Badges — Side decals and badges allow owners to add period script, model names or stripes, or to replace graphics that have shrunk, peeled or discoloured over time.

  • Confirm that the decal kit is sized for your specific Porsche body shape and that fitting instructions or guides are followed.
  • Good surface preparation helps prevent edge lifting, bubbles and trapped dirt that can mark the paint underneath.

Exterior Styling / Spoilers — Exterior styling and spoilers are changed to update the look, improve aerodynamics or follow a particular Porsche theme; Retro Line parts in this area are generally chosen to give a heritage-inspired appearance while working with existing body lines.

  • Many spoilers and styling parts require painting; always test fit on the car before paint or modification, as painted parts are difficult to return.
  • Check how the part mounts, and whether any drilling, brackets or seal changes are needed to avoid rattles, poor panel gaps or water ingress.

Explore Retro Line at Design911

View the current Retro Line range for Porsche at Design911, then filter by model and category to narrow down to the right parts for your car.

DISPLAYING 209 to 224 (of 411 products)
SG986B
Product Information
Product Information
Stone Chip Guards Set Black Porsche Boxster 986 / 987 Boxster / Cayman

retroline

Fits to lower rear 1/4 panels

Fits
Porsche 986 Boxster
Porsche 987 Boxster / Cayman

2 parts
Left & Right - Textured black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SG986B
98750482501
98750482601

The product you are viewing cross references to these numbers
SG996TC
Product Information
Product Information
Stone chip guard set - clear. Porsche 996 turbo

Fits to lower rear 1/4 panels

retroline

Fits - Wide Body Cars
Porsche 996 turbo

2 Parts
Left & Right
SG996TB
Product Information
Product Information
Stone chip guard set - Black. Porsche 996 Turbo

Fits to lower rear 1/4 panels

retroline

Fits - Wide Body Cars
Porsche 996 turbo

2 Parts
Left & Right - Textured black
SG996C4C
Product Information
Product Information
Stone chip guard set - clear. Porsche 996 Carrera 4S

Fits to lower rear 1/4 panels

retroline

Fits - Wide Body Cars
Porsche 996 Carrera 4S

2 Parts
Left & Right
SG996C4B
Product Information
Product Information
Stone chip guard set - black. Porsche 996 Carrera 4S

Fits to lower rear 1/4 panels

retroline

Fits - Wide Body Cars
Porsche 996 Carrera 4S

2 Parts
Left & Right - Textured black
SG996C
Product Information
Product Information
Stone chip guard set - clear. Porsche 996 Carrera / Carrera 4

Fits to lower rear 1/4 panels

retroline

Fits - Narrow Body Cars
Porsche 996 Carrera
Porsche 996 Carrera 4

2 Parts
Left & Right
SG996B
Product Information
Product Information
Stone chip guard set - black. Porsche 996 Carrera / Carrera 4

Fits to lower rear 1/4 panels

retroline

Fits - Narrow Body Cars
Porsche 996 Carrera
Porsche 996 Carrera 4

2 Parts
Left & Right - Textured black
PCH-SIDE
Product Information
Product Information
Cup / drinks holder. Side mount

retroline

Fits
Fits 718 Boxster, 718 Cayman, 718 Spyder, 911, Boxster, Cayman.

** Any Porsche with this centre console design will fit ** (some may be missing from below, I will update as best I can)

Porsche 991 ALL
Porsche 718 ALL
Porsche 981 ALL
Porsche 911 ALL 2011+
Porsche Boxster ALL 2013+
Porsche Cayman ALL 2014+

I'm a fan of the fold out cup holders but if you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons. This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans. This is a custom made cupholder to utilize un-used space in the car and add an additional convenience to your experience to all other makes and models. Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. 1x Side Bracket. 1x Cup Bracket. Satin Black. Plug and play. 5-15 min install time.

Fitment: 2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. YETI, Blender bottles, and larger size tumblers fit great.

Plug & Play: Minimal to no tools required. Pull on the centre console passenger side cover. Slip the side bracket in. It will slide into place and you will feel it lock into the casting behind the side cover. Screw the cup bracket into the side bracket. Slide cup onto the bracket.




Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

993641312XX
Product Information
Product Information
LCD display in MPH replacement for Porsche 964 / 993 instrument clusters

retroline

This LCD panel fits in to the Rev counter for cars with M659 on-board COMPUTER the LCD panel this should only be fitted by a professional

Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

993641312XX
993641311

The product you are viewing cross references to these numbers
PCHLOW
Product Information
Product Information
Centre console cup / drinks holder. Low Profile Edition

retroline

Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.





PCHPH
Product Information
Product Information
Centre console cup / drinks holder. Phone Holder Edition - Additional slot is added to fit your phone

retroline

Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.





PCHSTD
Product Information
Product Information
Centre console cup / drinks holder, Standard Edition

retroline

Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.





91161200310/1
Product Information
Product Information
Fully prepared 911 1970-1973 front harness with 2 x 6 pole male connector and relay base (for horn).

Fits:
Porsche 911 1971 - 1973

•   Waxed lacing wire and each wire at the right length.
•   Runs from fuse box to left and right fender / washer pump.
•   Original colour coded wiring.
•   Harness will exactly fit like the original.
•   Wire tube, and oil resistant tape as original.
•   Terminals have rubber sleeves.
•   New 6 pole male connectors and relay socket included.

Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200310
91161200310

The product you are viewing cross references to these numbers
91152108610/1
Product Information
Product Information
Foam for headrest, "Peanut-shape", adjustable
This headrest foam is a replacement inner foam pad for the adjustable “peanut-shape” headrest used on classic Porsche 911 models from 1968 to 1973. It is designed to help restore the correct headrest shape, support, and appearance during seat trimming or interior restoration.

Fits:
Porsche 911 2.0L-2.7L 09/1968 - 07/1973

The headrest foam sits inside the headrest cover and provides the padding, structure, and contour of the headrest. It helps give the headrest its correct period-style peanut shape while improving comfort and restoring the original look of the seat assembly.

Functions
•  Replaces the inner foam for the adjustable peanut-shape headrest
•  Helps restore the correct classic Porsche headrest profile
•  Provides padding and support inside the headrest cover
•  Improves comfort and headrest appearance
•  Replaces collapsed, brittle, crumbling, or misshapen original foam
•  Suitable for seat trimming and interior restoration work
•  RetroLine replacement for classic Porsche seat refurbishment.

Why Replace This Part?
Original headrest foam can deteriorate with age, heat, compression, and long-term use. Over time, the foam may collapse, crumble, harden, lose shape, or no longer fill the headrest cover correctly. Replacing the foam helps restore the correct shape, comfort, and presentation of the original adjustable headrest.

When to Replace This Part
•  The headrest foam has collapsed or lost its shape
•  The headrest feels hard, flat, uneven, or unsupported
•  The original foam is crumbling, brittle, or damaged
•  The headrest cover is being replaced or retrimmed
•  The seat interior is being restored
•  The headrest no longer has the correct peanut-shape profile
•  The vehicle is undergoing Porsche 911 interior restoration.

Where it fits on the car
This foam fits inside the adjustable peanut-shape headrest fitted to Porsche 911 seats. It is used as the internal padding beneath the headrest upholstery cover.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91152108610
91152108600
91152108610
1689809500

The product you are viewing cross references to these numbers
911538900SL
Product Information
Product Information
Blank key shank in silver Fuchs Retro Porsche

retroline

Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911538900SL
91153890300
91453190310
94453804101

The product you are viewing cross references to these numbers
911538900BK
Product Information
Product Information
Blank key shank in black Fuchs Retro Porsche

retroline

Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911538900BK
91153890300
91453190310
94453804101

The product you are viewing cross references to these numbers
DISPLAYING 209 to 224 (of 411 products)