Tiptronic transmission seal kit. Porsche 996 / 997.1 › 1402706500

PDK Valve Body

Restore accurate gear selection and reliable transmission operation with this Genuine Porsche PDK valve body for the 992.1 Carrera rear-wheel-drive models.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2S 3.0L 2024>>

Diagram Ref No 1 

This hydraulic control unit regulates transmission oil pressure and directs it to the appropriate gearbox components, allowing the eight-speed PDK transmission to engage clutches and change gears smoothly.

An original Porsche replacement for a faulty or damaged valve body.

Important: Confirm the gearbox code and part number against the vehicle VIN before ordering. Different PDK and drivetrain configurations may require alternative hydraulic control units.

What Does It Do?

The PDK valve body controls the flow and pressure of transmission oil within the gearbox.

Working with the electronic transmission control system, it operates the hydraulic circuits responsible for clutch engagement and gear selection, helping deliver fast, accurate gear changes.

Why Is It Important?

A properly functioning valve body is essential for consistent PDK operation.

A faulty unit may cause:

• Harsh or delayed gear changes
• Jerking or hesitation when accelerating
• Difficulty selecting Drive or Reverse
• Irregular clutch engagement
• Transmission warning messages
• Hydraulic pressure-related gearbox faults

These symptoms can also have other causes and should be diagnosed before replacement.

Why Do PDK Valve Bodies Fail?

Common causes include:

• Contaminated or deteriorated transmission oil
• Blocked internal hydraulic passages
• Worn or sticking control valves
• Solenoid or electrical faults
• Hydraulic pressure regulation problems

When Should It Be Replaced?

Replacement may be necessary when diagnostic testing confirms an internal valve body fault or hydraulic control failure.

The unit should also be inspected during gearbox repairs involving persistent shifting problems or abnormal transmission pressure readings.

Installation Notes

Installation requires specialist Porsche PDK transmission knowledge and diagnostic equipment.

Check gearbox fault codes, hydraulic pressure and transmission oil condition before fitting. Follow Porsche's specified installation, fluid filling and gearbox adaptation procedures.

Key Features

• Genuine Porsche original hydraulic control unit
• For selected Porsche 992.1 rear-wheel-drive models
• Designed for compatible eight-speed PDK transmissions
• Controls hydraulic pressure and gear selection
• Helps restore smooth and precise shifting
• Suitable for specialist transmission repairs
• Original Porsche specification and fit

PDK Valve Bodies & Hydraulic Control Units

The Porsche 992.1 Carrera, Carrera S and GTS rear-wheel-drive models use an eight-speed PDK transmission with hydraulic control systems that manage clutch engagement and gear selection.

Genuine Porsche PDK valve body provides an original replacement for compatible transmission assemblies. It is suitable for repairing confirmed hydraulic control faults, irregular gear changes and defective gearbox valve operation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0DT325101C

The product you are viewing cross references to these numbers

PDK Valve Body

Resolve gearbox hydraulic control problems with this OE Match PDK valve body for the Porsche 992.1 / 992.2 rear-wheel-drive Carrera range.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2S 3.0L 2024>>

Diagram Ref No 1 

The valve body directs pressurised transmission oil through the gearbox, controlling the hydraulic functions required for clutch operation and gear selection.

This aftermarket replacement offers a practical alternative to the Genuine Porsche unit when repairing a defective PDK transmission.

Important: Check and confirm the gearbox code and vehicle VIN before ordering. This valve body is not suitable for every 992 PDK transmission.

What Does It Do?

The valve body distributes hydraulic pressure to the transmission's clutch and gear-selection mechanisms.

Working alongside the gearbox electronics, it regulates oil flow to ensure the correct gears engage at the required time.

Why Is It Important?

Faulty hydraulic control can affect gear selection and transmission responsiveness.

Possible symptoms include:

• Rough or unpredictable gear changes
• Delayed engagement of Drive or Reverse
• Hesitation during acceleration
• Gearbox entering reduced-performance mode
• PDK transmission fault warnings

These symptoms require diagnosis, as they can also result from other gearbox problems.

Why Do PDK Valve Bodies Fail?

Common causes include:

• Contaminated transmission oil
• Sticking or worn internal valves
• Blocked hydraulic passages
• Faulty pressure-control solenoids
• Internal wear or electrical faults

When Should It Be Replaced?

Replacement is recommended when specialist diagnostic testing identifies a defective valve body or hydraulic pressure control fault.

Inspect the transmission oil, solenoids and related components before replacing the assembly.

Why Choose OE Match?

OE Match provides aftermarket replacement components for Porsche servicing and repair.

This PDK valve body offers an alternative to the original Porsche unit, helping restore hydraulic gearbox operation without replacing the complete transmission.

Installation Notes

Installation should be carried out by a Porsche PDK transmission specialist.

Confirm the gearbox code and part compatibility before fitting. Follow Porsche's specified transmission oil filling, diagnostic and adaptation procedures.

Key Features

• OE Match aftermarket PDK valve body
• For selected Porsche 992.1 / 992.2 Carrera 2WD models
• Designed for compatible eight-speed PDK gearboxes
• Regulates transmission hydraulic pressure
• Supports clutch engagement and gear selection
• Suitable for specialist gearbox repairs
• Alternative to a Genuine Porsche replacement

PDK Valve Bodies & Gearbox Hydraulic Components

The Porsche 992.1 Carrera rear-wheel-drive range uses an eight-speed PDK transmission with hydraulic controls responsible for clutch engagement and gear selection.

OE Match valve body provides an aftermarket replacement for compatible Porsche 992.1 PDK gearboxes. It offers a repair solution where hydraulic control faults, sticking valves or internal component wear affect transmission operation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0DT325101C

The product you are viewing cross references to these numbers

Wiring Set for PDK Valve Body

Restore reliable electrical communication within your Porsche's PDK transmission with this Genuine Porsche valve body wiring set.

Fits:

• Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19 (standard, non LSD)
• Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19 (standard, non LSD)
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24

Diagram Ref No 2 

The wiring set connects the gearbox electrical system to the valve body's control components, allowing electronic signals to regulate hydraulic functions and gear selection.

It provides an original replacement for damaged or faulty wiring during PDK transmission repairs.

Fitment depends on transmission specification, differential equipment and gearbox code. Confirm the vehicle VIN and gearbox code before ordering.

What Does It Do?

The wiring set carries electrical signals between the transmission control system and the PDK valve body's electrical components.

These signals control the hydraulic functions responsible for clutch engagement and gear changes, helping the transmission operate correctly.

Why Is It Important?

Reliable electrical connections are essential for accurate gearbox control.

Damaged wiring may cause:

• Intermittent or harsh gear changes
• Delayed gear engagement
• Transmission warning messages
• Electrical fault codes
• Incorrect valve body operation

These symptoms may also result from other transmission faults.

Why Do PDK Wiring Sets Fail?

Common causes include:

• Heat-related insulation deterioration
• Damaged or loose electrical connectors
• Transmission fluid contamination at connections
• Broken or damaged internal wiring
• Damage during gearbox servicing

When Should It Be Replaced?

Replacement is recommended when diagnostic testing confirms damaged wiring, faulty connections or electrical continuity problems.

The wiring set should also be inspected when repairing or replacing the PDK valve body.

Installation Notes

Installation requires specialist Porsche PDK transmission knowledge.

Inspect the electrical connectors and valve body connections before fitting. Confirm the correct gearbox and differential specification, then follow Porsche's installation and diagnostic procedures.

Key Features

• Suitable for specified standard differential and 4WD applications
• Connects valve body electrical control components
• Supports hydraulic gearbox operation
• Replaces damaged or faulty transmission wiring
• Suitable for specialist PDK gearbox repairs

Valve Body Wiring Sets

The Porsche 992.1 and 992.2 eight-speed PDK transmissions rely on electrical wiring to control hydraulic valve body functions and maintain accurate gear selection.

This Genuine Porsche PDK valve body wiring set provides a replacement for compatible Carrera 2 standard-differential and Carrera 4 all-wheel-drive transmission assemblies.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0DT907998

The product you are viewing cross references to these numbers

Wiring Set for PDK Valve Body

Repair faulty gearbox electrical connections with this OE Match PDK valve body wiring set for selected Porsche 992 Carrera models.

Fits:

• Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19 (standard, non LSD)
• Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19 (standard, non LSD)
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24

Diagram Ref No 2 

This replacement wiring assembly carries electrical signals to the transmission's hydraulic control components, helping the PDK gearbox select gears and operate its clutches correctly.

An aftermarket alternative to the original Porsche wiring set, suitable for specialist transmission repairs.

What Does It Do?

The wiring set provides electrical connections between the PDK transmission control system and valve body components.

It allows control signals to reach the hydraulic valves responsible for clutch operation and gear selection, supporting accurate and consistent shifting.

Why Is It Important?

Faulty wiring can interrupt the signals needed for correct gearbox operation.

Possible symptoms include:

• Intermittent or delayed gear changes
• Difficulty engaging Drive or Reverse
• PDK gearbox warning messages
• Electrical fault codes
• Irregular transmission operation

These symptoms may also indicate valve body or transmission control faults.

Why Do PDK Wiring Sets Fail?

Common causes include:

• Heat-damaged wiring insulation
• Loose or corroded electrical contacts
• Broken or damaged wires
• Transmission fluid contamination at connectors
• Accidental damage during gearbox repairs

When Should It Be Replaced?

Replace the wiring set when diagnostic testing confirms damaged wiring, poor electrical continuity or defective connectors.

It should also be inspected during valve body replacement or when investigating persistent PDK electrical faults.

Why Choose OE Match?

OE Match provides an aftermarket alternative for repairing Porsche transmission electrical systems.

This replacement wiring set offers a practical solution for renewing damaged gearbox connections without replacing an otherwise serviceable valve body.

Installation Notes

Installation should be carried out by a Porsche PDK transmission specialist.

Confirm the gearbox code and differential specification before fitting. Inspect all connectors and follow Porsche's specified installation and diagnostic procedures.

Key Features

• OE Match aftermarket replacement wiring set
• For selected Porsche 992.1 and 992.2 PDK applications
• Suitable for specified standard differential and 4WD configurations
• Connects transmission valve body electrical components
• Supports hydraulic gear selection and clutch operation
• Replaces damaged or faulty gearbox wiring
• Alternative to a Genuine Porsche replacement

PDK Valve Body Wiring Sets

The Porsche 992.1 and 992.2 eight-speed PDK transmissions use electrical wiring assemblies to control hydraulic functions responsible for clutch engagement and gear changes.

OE Match PDK valve body wiring sets provide aftermarket replacements for compatible Porsche 992 Carrera transmissions, including specified Carrera 2 standard-differential and Carrera 4 all-wheel-drive applications.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0DT907998

The product you are viewing cross references to these numbers