PDK Valve Body. Porsche 992.1 Carrera 2 / 2S / 2 GTS / 992.2 Carrera 2 / 2S › 0DT325101C

PDK Valve Body

Restore accurate gear selection and reliable transmission operation with this Genuine Porsche PDK valve body for the 992.1 Carrera rear-wheel-drive models.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2S 3.0L 2024>>

Diagram Ref No 1 

This hydraulic control unit regulates transmission oil pressure and directs it to the appropriate gearbox components, allowing the eight-speed PDK transmission to engage clutches and change gears smoothly.

An original Porsche replacement for a faulty or damaged valve body.

Important: Confirm the gearbox code and part number against the vehicle VIN before ordering. Different PDK and drivetrain configurations may require alternative hydraulic control units.

What Does It Do?

The PDK valve body controls the flow and pressure of transmission oil within the gearbox.

Working with the electronic transmission control system, it operates the hydraulic circuits responsible for clutch engagement and gear selection, helping deliver fast, accurate gear changes.

Why Is It Important?

A properly functioning valve body is essential for consistent PDK operation.

A faulty unit may cause:

• Harsh or delayed gear changes
• Jerking or hesitation when accelerating
• Difficulty selecting Drive or Reverse
• Irregular clutch engagement
• Transmission warning messages
• Hydraulic pressure-related gearbox faults

These symptoms can also have other causes and should be diagnosed before replacement.

Why Do PDK Valve Bodies Fail?

Common causes include:

• Contaminated or deteriorated transmission oil
• Blocked internal hydraulic passages
• Worn or sticking control valves
• Solenoid or electrical faults
• Hydraulic pressure regulation problems

When Should It Be Replaced?

Replacement may be necessary when diagnostic testing confirms an internal valve body fault or hydraulic control failure.

The unit should also be inspected during gearbox repairs involving persistent shifting problems or abnormal transmission pressure readings.

Installation Notes

Installation requires specialist Porsche PDK transmission knowledge and diagnostic equipment.

Check gearbox fault codes, hydraulic pressure and transmission oil condition before fitting. Follow Porsche's specified installation, fluid filling and gearbox adaptation procedures.

Key Features

• Genuine Porsche original hydraulic control unit
• For selected Porsche 992.1 rear-wheel-drive models
• Designed for compatible eight-speed PDK transmissions
• Controls hydraulic pressure and gear selection
• Helps restore smooth and precise shifting
• Suitable for specialist transmission repairs
• Original Porsche specification and fit

PDK Valve Bodies & Hydraulic Control Units

The Porsche 992.1 Carrera, Carrera S and GTS rear-wheel-drive models use an eight-speed PDK transmission with hydraulic control systems that manage clutch engagement and gear selection.

Genuine Porsche PDK valve body provides an original replacement for compatible transmission assemblies. It is suitable for repairing confirmed hydraulic control faults, irregular gear changes and defective gearbox valve operation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0DT325101C

The product you are viewing cross references to these numbers