Please wait…

Please wait while we process your order,
do not press the back button…

Porsche 992 (911) MK1 2019-2024 992.1 Turbo Cabriolet 3.8L 2020-24 Suspension & Axle Shock Absorber Parts FRONT

Shock Absorber Mounting, FRONT and REAR. Porsche 958 Cayenne 2010-17 › 95834301820

5 5 5 5 5

Check vehicle fitment

OE Match

95834301820/1

Product Information

OE Match shock absorber mounting for the Porsche 958 Cayenne, used in front and rear air-suspension assemblies. The supplied diagrams identify reference 95834301820 as a shock absorber bearing for PR:1BK-equipped vehicles.

Fits

Porsche 958 Cayenne 2011 >> with I1BK

* I1BK - cars with Air Suspension with levelling system and height adjustment (PASM)

Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram reference no: 6

What This Product Does

The mounting supports the shock absorber within its suspension assembly, helping retain the intended position while limiting the transmission of road-induced noise and vibration. It is a mounting component rather than a complete damper or air spring.

Functions

Supports the shock absorber at its mounting point.
Helps maintain the damper’s intended position.
Helps isolate vibration and mounting noise.

Technical Details

Product reference: 95834301820.
Diagram designation: shock absorber bearing.
Application: FRONT and REAR suspension assemblies.
Suspension equipment: PR:1BK air suspension with levelling and height adjustment.
Diagram coverage includes vehicles up to 2014 and from 2015 onwards within the supplied model applications.
Each supplied assembly diagram specifies quantity 2; this is an assembly requirement, not confirmation of pack contents.

Symptoms of Fault

A worn mounting may contribute to knocks over uneven surfaces, rattling or increased vibration. Similar symptoms can originate from bushes, links, fixings or the damper itself, so inspect the assembly before selecting replacement parts.

Why Replacement Matters

Renewing a deteriorated mounting addresses wear at the damper support rather than leaving an old component in place during suspension repairs. When changing dampers, inspect the associated mounts and hardware to avoid overlooking another source of noise.

FAQs

Should mounts be checked when replacing dampers?
Yes. Inspect them for wear or damage and renew them where necessary.

Does a knocking noise confirm mounting failure?
No. Other suspension joints and fixings can produce similar noises; diagnosis should come first.

Is it suitable for every 958 Cayenne?
Do not assume universal compatibility. Check reference 95834301820 and the PR:1BK air-suspension requirement against your vehicle.

Check fitment for your specific vehicle (model, year, engine) before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834301820

95834301820

The product you are viewing cross references to these numbers

Related products

4 4 4 4

Shock absorber concave washer. Porsche 991.2 / 992.1 / 992.2

9P1412103

Product Information

Shock absorber concave washer
This Porsche Genuine OE Shock Absorber Concave Washer 9P1412103 is a small but essential suspension mounting component used on selected Porsche 991.2 and 992 models with advanced suspension systems. It ensures proper load distribution and alignment within the shock absorber assembly, helping maintain factory suspension performance, ride quality, and durability.
Sold individually, 2 required - fits left or right suspension strut

Fits:
* cars with Front axle lift function (Option code: 474)
Porsche 991.2 Carrera 2017 - 2019
Porsche 991.2 Turbo 2017 - 2020

* with Controlled suspension system (Option code: 2UH)
Porsche 992.1 Carrera 2020 - 2024
Porsche 992 DAKAR (PR:E7S) 2022 - 2024
Porsche 992.1 Turbo 2020 - 2025

* with Controlled suspension system (Option code: 2UH)
Porsche 992.2 Carrera 2024>>
Porsche 992.2 Turbo S 2026>>

Diagram ref no 10

The concave washer sits within the shock absorber mounting assembly and helps evenly distribute clamping force across the suspension components. Its specially formed curved profile supports the correct positioning of the shock absorber mount, helping maintain suspension geometry and reducing stress on mounting surfaces during suspension movement.

Functions & Technical Role
• Load distribution: Spreads suspension forces evenly across mounting points
• Mounting support: Assists correct positioning of the shock absorber assembly
• Suspension stability: Helps maintain proper suspension alignment under load
• Vibration control: Reduces stress and movement within the mounting assembly
• OEM precision: Manufactured to Porsche specifications for exact fitment and durability

Fitment / Position on car
• Fitting position: Front axle suspension
• Location: Shock absorber / strut mounting assembly
• System: Front suspension and damping system

The concave washer supports correct suspension mounting geometry and helps prevent uneven stress on suspension components. Proper load distribution is essential for maintaining ride quality, handling precision, and long-term durability.

When to Replace
• During shock absorber or suspension overhaul
• Damaged, bent, or corroded mounting hardware
• Suspension noise or movement from the strut assembly
• Following accident or suspension impact damage
• When replacing associated suspension mounting components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1412103

9P1412103

The product you are viewing cross references to these numbers

5 5 5 5 5

Front Shock Absorber Compensation Ring. Porsche 981 / 982 / 991.1 / 991.2 / 992.1 / 992.2

9P1412269

Product Information

Front Shock absorber compensation ring.
A genuine Porsche compensation ring (shim/spacer ring) for the front shock absorber/strut assembly. It provides the correct spacing and seating interface within the front strut/shock assembly, helping components locate properly and clamp securely. This supports correct assembly stack height and helps prevent looseness, misalignment, or unwanted movement.
Sold each, 2 required per vehicle

Fits:
Porsche 981 Boxster 2012 - 2016
Porsche 981SP Boxster Spyder 2016
Porsche 982 (718) Boxster 2017 >>

Porsche 981C Cayman 2014 - 2016
Porsche 982C (718C) Cayman 2017 >>

Porsche 991.1 Carrera 2012 - 2016
Porsche 991.2 Carrera 2017 - 2019
Porsche 991 Turbo 2014 - 2020

Porsche 992.1 Carrera 2019 - 2024
Porsche 992.1 DAKAR 2023 - 2024
Porsche 992.2 Carrera 2024 >>
Porsche 992 Turbo 2020 >>

Diagram Ref No 5

Installed as part of the front damper/strut mounting hardware, the compensation ring acts as a precision spacer to ensure correct fitment between adjoining suspension components. By maintaining the intended tolerances and seating surfaces, it helps preserve correct suspension operation, reduces the risk of noise or play, and supports accurate alignment.

Suspension hardware relies on precise tolerances. A worn, incorrect, or missing compensation ring can affect clamping force, component alignment, and overall assembly integrity - potentially leading to noises, premature wear, or geometry changes. Using a genuine Porsche ring ensures factory-correct thickness and fit, preserving the suspension performance Porsche engineered.

When to replace:
• During front shock/strut replacement or rebuild
• Ring is corroded, distorted, or damaged during disassembly
• Persistent front-end noise traced to strut hardware (after inspection)
• Suspension work requiring correct factory stack height/spacers
• Replacing superseded part 99134351300

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1412269

9P1412269

99134351300

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

Shock Absorber Mounting, FRONT and REAR. Porsche 958 Cayenne 2010-17 › 95834301820