Transfer box, Exchange unit. ALSO ADD Surcharge 958341020CU Genuine Porsche part 958341020CX

Track Control Arm, FRONT.
Restore precise suspension geometry and confident handling with this OE Match Front Track Control Arm, manufactured as a direct replacement. Produced to OE-style specifications, this front suspension control arm is designed to maintain the correct position of the wheel hub while allowing controlled suspension movement, ensuring stable handling, steering precision, and even tyre wear.

Fitting Position: Front Axle Left And Right
Fitting Position: Upper
Steering Arm Type: Control Arm

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17  

Diagram Ref No 15

Over time, the original control arm can suffer from worn bushes, deteriorated ball joints, or damage caused by road impacts and continual suspension movement. These issues can lead to poor steering response, suspension noise, uneven tyre wear, and compromised handling. Replacing a worn front track control arm restores the suspension to its intended performance, making this OE Match component an excellent choice for routine maintenance, suspension repairs, and Porsche restoration projects.  

What This Product Does:

• Locates and supports the front wheel within the suspension.
• Maintains correct suspension geometry and wheel alignment.
• Allows controlled vertical suspension movement.
• Helps provide accurate steering response and vehicle stability.
• Reduces unwanted wheel movement during driving.
• Replaces worn or damaged original suspension components.
• Provides an OE-style fit and dependable quality.

Symptoms Of Wear Or Failure:

• Knocking or clunking noises from the front suspension.
• Excessive steering play or vague handling.
• Uneven or accelerated front tyre wear.
• Vehicle pulling to one side.
• Steering wheel vibration.
• Poor wheel alignment that cannot be maintained.
• Visible wear, cracking, or damage to the control arm, bushes, or ball joint.

Why Replacement Matters:

• The front track control arm is a critical suspension component that controls wheel movement while maintaining the correct alignment and geometry between the chassis and the front wheels. A worn or damaged control arm can negatively affect handling, braking stability, steering precision, and tyre life, while increasing wear on other suspension components.
• Replacing the front track control arm restores suspension integrity, improves steering response, and helps maintain predictable vehicle handling and even tyre wear. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match control arm provides the correct fit, dependable quality, and long-lasting durability, making it an excellent choice for Porsche maintenance, suspension repairs, and restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834105100

The product you are viewing cross references to these numbers

Track Control Arm FRONT.

Fits:
Porsche 958 Cayenne 3.0L-4.8L (incl. DIESEL) 06/2010-16

Fitting Position: Front Axle left and right
Fitting Position: Upper
Steering arm type: Control Arm

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834105100

The product you are viewing cross references to these numbers

Front lower wishbone / control arm. 

Fits:
Porsche 958-1 Cayenne 3.6L V6 2011-14
Porsche 958-1 Cayenne Diesel 3.0L V6 2011-14
Porsche 958-1 Cayenne S 4.8L V8 2011-13
Porsche 958-1 Cayenne S Hybrid 3.0L V6 2011-14

NOTE: This wishbone is not compatible with GTS or Turbo models. These models require a different part number.

Diagram ref. 5.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834105

The product you are viewing cross references to these numbers

Front Lower Wishbone / Control Arm

OE Match front lower wishbone/control arm for selected Porsche 958 Cayenne models from 2011 to 2014. Left and right-hand versions are available separately, providing a direct replacement for a worn or damaged original suspension arm.

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-14
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-14
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-14
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-14
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-14

Diagram ref. 5

The lower wishbone is a key part of the Cayenne's front suspension, connecting the wheel carrier to the chassis/subframe and controlling wheel movement as the suspension travels. It helps maintain correct suspension geometry during cornering, braking and driving over uneven road surfaces.

What Does the Front Lower Wishbone Do?

The lower wishbone, also known as a control arm or track control arm, locates the front wheel relative to the vehicle's chassis while allowing the suspension to move vertically.

It helps control wheel alignment and suspension geometry while transferring braking, cornering and road forces through the suspension. Correct operation is important for stable steering, consistent tyre contact and predictable handling.

Why Does It Fail?

The control arm itself is a substantial component, but its bushes and associated joints are subjected to continual movement and considerable loads.

Wear can result from:

Deteriorated suspension bushes Wear in associated joints High mileage Potholes and heavy road impacts Corrosion Accident or kerb damage Repeated heavy suspension loads Age-related deterioration

As wear increases, unwanted movement can develop within the suspension, affecting steering accuracy and wheel alignment.

When Should It Be Replaced?

Typical symptoms of a worn front control arm or its associated components can include:

Knocking or clunking over bumps Vague or imprecise steering Vehicle pulling to one side Steering vibration Uneven or accelerated tyre wear Poor wheel alignment Excessive suspension movement Visible damage to the arm or bushes

Similar symptoms can be caused by other steering and suspension components, so the complete front suspension should be inspected before replacement.

Checks During Replacement

When replacing the lower wishbone, also inspect:

Opposite front lower wishbone Suspension bushes Ball joints Upper control arms Anti-roll bar links and bushes Steering track rods Wheel bearings Dampers and suspension mounts Mounting bolts and fasteners

A four-wheel alignment should be checked after control arm replacement to ensure the suspension geometry is correctly set.

NOTE: This wishbone is not compatible with GTS or Turbo models. These models require a different part number.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834105

The product you are viewing cross references to these numbers

Front suspension self levelling sensor with linkage, LEFT / RIGHT

Fits:
Porsche 958 Cayenne 2011-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834107

The product you are viewing cross references to these numbers

Track control arm, lower.
The Porsche Genuine OE Lower Track Control Arms (Part Nos. 95834105311 and 95834105411) are factory-engineered suspension components designed for the front axle of the Porsche Cayenne 958 (2011–2018). Often referred to as front lower control arms or wishbones, these components connect the steering knuckle to the chassis and form a key structural part of the vehicle’s independent suspension system.

Fits:
Porsche 958.1 Cayenne GTS / Turbo S 2011 - 2014
Porsche 958.2 Cayenne 2015 - 2018

Diagram ref no 5

Each arm is supplied as a single genuine Porsche product (sold individually) and includes integrated bushings and ball joint assemblies to ensure precise suspension movement and correct wheel geometry.

  •  95834105311 – Left front lower track control arm
  •  95834105411 – Right front lower track control arm

The lower track control arm acts as a pivoting link between the chassis and the wheel carrier. It allows the wheel assembly to move vertically over bumps while maintaining proper alignment and steering geometry. This ensures stable handling, controlled suspension travel, and consistent tyre contact with the road surface.

By absorbing loads from braking, acceleration, and cornering, the control arm helps maintain the Cayenne’s balance between ride comfort, handling stability, and off-road durability.

Functions & Technical Role
•  Wheel positioning: Maintains correct alignment and camber during suspension movement
•  Suspension articulation: Allows the wheel to move smoothly over uneven road surfaces
•  Load transfer: Distributes braking and cornering forces to the chassis
•  Integrated components: Includes ball joint and bushings for controlled pivot movement
•  OEM precision: Manufactured to Porsche specifications for durability and correct suspension geometry

Over time, suspension components experience heavy stress from road impacts, braking forces, and constant suspension movement. Worn bushings or ball joints can lead to:
•  Clunking noises over bumps
•  Uneven tyre wear
•  Steering instability or pulling
•  Reduced ride comfort and handling precision.

Replacing worn arms with genuine Porsche OE control arms restores correct suspension geometry and preserves the Cayenne’s original ride quality and driving dynamics.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834105

The product you are viewing cross references to these numbers

Front upper wishbone. Fits left or right side. Sold each.

Fits:
Porsche 955 Cayenne MKI 2003-06
Porsche 957 Cayenne MKII 2007>>

Click 'Zoom in' for large parts diagram.
Diagram ref No 11.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534102702

The product you are viewing cross references to these numbers

Front upper control arm set tubular 
Set of 2 upper control arms  (left and right)

Fits:

Porsche 958 Cayenne - 2010 to 2017
** Not for E-Hybrid**

Lift your 958 Cayenne or Touareg 3 inches or more but cant get the camber dialed back in? 

We have developed these control arms specifically for our 3" lift kits and more. Cayenne and VW Touareg's running more than 2.5 inches of lift require proper alignment. If you have a subframe drop and don't have upper control arms with camber adjustment there's a good chance your vehicle has too much positive camber. The factory lower camber adjustments do not have enough movement to put this chassis back into proper specs to drive safely and reliably.

After months of testing and lots of gruesome off-road testing. We are now happy to announce the release of our tubular upper control arms. These are built from DOM tubing with spherical ball joint on the spindle and Polyurethane mounting bushings at the rearward control arm mounting points. This will allow for maximum travel when off-roading which translates to better performance and ride.

Please Note:
If you are lowering subframe more than 1” with these tubular arms. You will have more camber in front beyond OEM specs 1-1.5 degrees negative.

Due to the nature of performance spherical ball joints they are not quiet like conventional OEM rubber bushings. You may hear clunks and minor clicking noises in some cases. This is perfectly normal and nothing to be alarmed about. It may be time for rebuild which these arms are 100% serviceable.

Arms may come black powder coated finish based on availability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOR21014

The product you are viewing cross references to these numbers

Front Lower Wishbone Front Bush.
This is pack of 2 bushes for left and right arm.


This part replaces OEM part number:
95834324300 / 95834158800

PFF57-1201 is made using our Black Series Shore 95 A material to boost the stiffness of the original bush by 40%.

Fits arms with a larger 45.8mm internal diameter, replacing the original two-piece rubber bush and cap. 

Made using our Black 95A durometer polyurethane and including a knurled inner bore for grease retention, this new part guarantees improved performance and longevity.

Fits:
Porsche Cayenne 958 GTS - 2011 to 2017
Porsche Cayenne 958 turbo - 2011 to 2017

Replacing your rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1201

The product you are viewing cross references to these numbers