Adapter Genuine Porsche part 97034928200

Code: 97034928200

Genuine Porsche part

Adapter

The product code 97034928200 was also found on these diagrams

401-021 - adapter bellows

Front Axle, Steering Panamera 970 MK1 (2009-2013)

Drive shaft (PR:339) Panamera 970 (G1) 2011-2013

401-022 - adapter bellows

Front Axle, Steering Panamera 970 MK2 (2014-2016)

Drive shaft (PR:339) Panamera 970 (G1) 2014>>

Additional information:

• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.

Before purchasing thoroughly check part to confirm compatibility.

Related products

CV joint boot, Front axle, inner. Porsche 970.1 Panamera >>2010

97034925900

Product Information

CV joint boot, Front axle, inner.
This original Porsche CV boot protects the inner constant velocity joint on the front drive shaft, helping retain grease, prevent contamination and maintain smooth front axle drivetrain operation.
Sold individually

Fits:
Porsche 970.1 Panamera 4 / 4S / Turbo >>2010
* All-wheel drive - option code: 339

Diagram ref no 12

What This Part Does / Functions
•  Protects the inner CV joint from dirt, water and road debris
•  Retains the correct CV joint grease inside the joint
•  Helps prevent premature CV joint wear.
•  Allows normal drive shaft movement during suspension travel
•  Maintains smooth front axle drivetrain operation
•  Replaces a split, cracked, leaking or perished original CV boot
•  Helps avoid full drive shaft replacement if the CV joint is still serviceable
•  Provides correct Genuine Porsche OE rubber fitment and profile.

Why Replace This Part?
The CV joint boot is a protective sealing component. It is exposed to heat, road debris, water, salt, suspension movement and age-related rubber deterioration. Over time, the boot can crack, split or lose its sealing ability, allowing grease to escape and dirt or moisture to enter the CV joint. Replacing a damaged boot with a Genuine Porsche OE front inner CV joint boot helps protect the CV joint and maintain reliable drive shaft operation.

Common Symptoms of a Failed CV Boot
•   Grease sprayed around the inner front axle area
•   Split, cracked or perished rubber boot
•   Visible grease loss from the CV joint
•   Clicking, knocking or vibration if the joint has become worn
•   Dirt or water contamination inside the CV joint
•   MOT / roadworthiness failure due to damaged CV boot
•   Boot damage found during suspension or drivetrain inspection
•   Front drive shaft wear caused by loss of lubrication.

When to Replace This Part
•   If the CV boot is split, cracked or leaking grease
•   If the boot clamp has failed or the boot no longer seals correctly
•   During front drive shaft repair
•   If the CV joint is being cleaned, inspected or repacked with grease
•   During front axle suspension or drivetrain overhaul
•   After road debris, impact or service damage to the boot
•   Before CV joint wear develops from contamination.

Where It Fits on the Car
This boot fits on the front axle inner CV joint, at the inner end of the front drive shaft where it connects towards the front differential / drive unit side.

Correct installation requires suitable CV boot clamps, correct grease and proper seating of the boot on the joint and shaft. If the CV joint has already been run without grease or has contamination damage, the joint or complete drive shaft should also be inspected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97034925900

97034925900

The product you are viewing cross references to these numbers

CV Joint boot KIT Constant Velocity Joint boot. Porsche 970.1 Panamera >>2010

97034925900/1

Product Information

CV Joint boot KIT Constant Velocity Joint boot, Front axle, inner.
This CV boot protects the inner constant velocity joint on the front drive shaft, helping retain grease, prevent contamination and maintain smooth front axle drivetrain operation.

Fits:
Porsche 970.1 Panamera 4 / 4S / Turbo >>2010
* All-wheel drive - option code: 339

Diagram ref no 12

Inner Diameter 1: 27 mm
Inner Diameter 2: 94 mm
Height: 108 mm
Joint Type: Flexible Joint
Disc Bore Ø: 8.5 mm
Number of bores: 6 Bolt
Hole Circle: Ø 78 mm
Bellows Material: TPE (thermoplastic elastomer)
New Part
Supplementary Article: with cap,  with grease

High-quality GKN inner CV joint boot kit for early Porsche Panamera 970.1 all-wheel-drive models, designed as a replacement for Porsche OE reference 97034925900.

The GKNB20641 is fitted to the inner, transmission-side CV joint of the front driveshaft and is suitable for use on either the front-left or front-right side.

The CV joint boot is an essential protective component of the driveshaft assembly. It keeps the specialised CV joint grease contained around the joint while preventing water, dirt, road debris and other contaminants from entering.

A damaged or split boot can quickly lead to grease loss and contamination of the CV joint. If left unattended, this can cause accelerated wear and may eventually require replacement of the complete CV joint or driveshaft.

What Does the CV Joint Boot Do?
The constant-velocity joint allows the driveshaft to transfer power while accommodating movement between the drivetrain, suspension and wheel. To operate correctly, the joint requires specialised grease and must remain protected against contamination.

The flexible CV boot creates this protective seal while allowing the driveshaft and joint to move naturally during normal vehicle operation.

The GKNB20641 is positioned on the inner end of the front driveshaft, closest to the transmission / differential.

Why Replace a Damaged CV Boot?
CV boots are continuously exposed to:
•  Heat Road dirt Water and moisture
•  Repeated flexing
•  Drivetrain movement
•  Grease and other automotive fluids

Changes in temperature Over time, the boot material may become cracked, split or damaged. Common signs of a failing CV boot include:
•   Visible cracks or splits
•   Grease leaking around the driveshaft
•   Grease deposited on surrounding suspension components
•   Loose or damaged retaining clamps
•   Dirt or moisture entering the joint
•   Clicking or knocking noises
•   Vibration under acceleration
•   Excessive drivetrain play

Replacing a damaged boot early can help preserve an otherwise serviceable CV joint and avoid the additional expense of replacing the complete driveshaft.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97034925900

97034925900

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

Adapter Genuine Porsche part 97034928200