Handbrake Cables

Anchor Pin Retainer Clutch Pedal. 
Maintain the secure operation of your Porsche clutch pedal assembly with this OE Match Anchor Pin Retainer for Clutch Pedal. Produced to OE-style specifications, this anchor pin retainer is designed to securely retain the clutch pedal anchor pin in its correct position, ensuring smooth and reliable clutch pedal movement while preventing unwanted pin movement or disengagement. Manufactured from high-quality spring steel for excellent strength, durability, and fatigue resistance, it provides long-lasting performance and an accurate fit for Porsche maintenance, repairs, and restoration projects.

Fits:

• Porsche 356 1950-55
• Porsche 356A 1955-59
• Porsche 356B 1959-63
• Porsche 356C 1963-65  

Diagram Ref No 60

The anchor pin retainer is a small but essential component within the clutch pedal mechanism. It prevents the anchor pin from working loose under repeated pedal operation, maintaining the correct alignment of the clutch pedal linkage. Over time, the retainer can weaken, corrode, deform, or become damaged during servicing, increasing the risk of excessive pedal play or anchor pin movement. Replacing a worn retainer restores the security of the clutch pedal assembly and helps ensure dependable clutch operation.

What This Product Does:

• Secures the clutch pedal anchor pin in position.
• Prevents the anchor pin from working loose.
• Maintains correct alignment of the clutch pedal linkage.
• Supports smooth and consistent clutch pedal operation.
• Helps ensure safe and reliable clutch engagement.
• Replaces worn, damaged, or weakened retainers.
• Provides an OE-style fit for straightforward installation.

Symptoms Of Wear Or Failure:

• Loose or displaced clutch pedal anchor pin.
• Excessive play in the clutch pedal.
• Clutch pedal movement becoming inconsistent.
• Damaged, bent, or missing retainer.
• Corrosion affecting the retaining clip.
• Unusual noises from the pedal assembly.
• Wear identified during clutch pedal servicing or restoration.

Why Replacement Matters:

• The anchor pin retainer is a small but critical component that keeps the clutch pedal anchor pin securely in place throughout repeated pedal operation. If the retainer becomes weakened, damaged, or is missing, the anchor pin may move out of position, leading to excessive pedal play, poor clutch feel, or even partial pedal disengagement.
• Replacing a worn anchor pin retainer restores the integrity of the clutch pedal assembly, ensuring secure operation, consistent pedal feel, and long-term reliability. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match Anchor Pin Retainer for Clutch Pedal provides reliable fit, performance, and durability for Porsche maintenance, repairs, and restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64423219

The product you are viewing cross references to these numbers

Clutch Cable Adjusting Nut.
Ensure accurate clutch adjustment and dependable clutch operation with this OE Match Clutch Cable Adjusting Nut. Produced to OE-style specifications, this adjusting nut is designed to provide precise adjustment of the clutch cable, allowing the correct clutch pedal free play and engagement point to be set. Manufactured from high-quality, corrosion-resistant steel with precision-cut threads, it delivers excellent durability, secure adjustment, and long service life, making it ideal for Porsche maintenance, repairs, and restoration projects.

Fits:

• Porsche 356 1950-55
• Porsche 356A 1955-59
• Porsche 356B 1959-63
• Porsche 356C 1963-65  

Diagram Ref No 60

The clutch cable adjusting nut is a vital part of the mechanical clutch linkage, enabling fine adjustment of cable tension as components wear over time. Correct adjustment ensures smooth clutch engagement, prevents premature clutch wear, and maintains consistent pedal feel. Exposure to road debris, moisture, corrosion, and repeated adjustment can cause the original nut to seize, wear, or suffer thread damage, making accurate adjustment difficult or impossible. Replacing a worn adjusting nut restores reliable adjustment and helps maintain the correct operation of the clutch system.  

What This Product Does:

• Allows precise adjustment of clutch cable tension.
• Maintains the correct clutch pedal free play.
• Ensures proper clutch engagement and disengagement.
• Helps prevent premature clutch wear.
• Provides secure locking once correctly adjusted.
• Replaces seized, worn, or damaged adjusting nuts.
• Provides an OE-style fit for straightforward installation.

Symptoms Of Wear Or Failure:

• Difficulty adjusting the clutch cable.
• Seized or corroded adjusting nut.
• Damaged or stripped threads.
• Incorrect clutch pedal free play.
• Clutch slipping or dragging caused by poor adjustment.
• Inconsistent clutch engagement point.
• Damage identified during clutch servicing.

Why Replacement Matters:

• The clutch cable adjusting nut is essential for maintaining the correct adjustment of the mechanical clutch system. If the nut becomes seized, damaged, or worn, accurate clutch adjustment may no longer be possible, resulting in poor clutch engagement, excessive pedal travel, premature clutch wear, or difficulty changing gears.
• Replacing a worn adjusting nut restores precise clutch cable adjustment, ensuring consistent pedal feel, smooth gear changes, and reliable clutch operation. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match Clutch Cable Adjusting Nut provides reliable fit, performance, and durability for Porsche maintenance, repairs, and restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64423220

The product you are viewing cross references to these numbers

Guide bush to spring for handbrake cable.
Genuine Porsche part ensures exact fit, proper locking function, and long-lasting reliability. Located within the handbrake lever assembly on Porsche 356 models.  Works alongside the pressure spring and pawl mechanism to secure lever position

Fits:
for Right Hand Drive (RHD) cars
Porsche 356 A/540.1 1950 - 1955
Porsche 356 B / C 1950 - 1965
Porsche 356 Carrera 2000 upto 1963

Diagram ref no 9

This guide bush serves as both a locator and locking element in the handbrake mechanism. It helps guide the movement of the lever and maintain the correct locking position when the handbrake is engaged, providing smooth, consistent operation and secure holding force.

Why replacement matters:
• With age and wear, the original guide bush can deform, corrode, or lose its locking tension, resulting in a loose or unstable handbrake lever.
• Installing a genuine Porsche replacement restores proper engagement and precise lever movement—ensuring reliable parking brake function and preserving factory authenticity.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64424232

The product you are viewing cross references to these numbers

Guide bush/locking segment for handbrake cable.
The OE Match guide bush / locking segment is a replacement built to Porsche’s original specifications for 356 models. It replicates the genuine part’s fit and function, restoring smooth, secure handbrake operation and proper lever alignment within the handbrake cable assembly.

Fits:
for Left Hand Drive (LHD) cars
Porsche 356 A/540.1 1950 - 1955
Porsche 356 B / C 1950 - 1965
Porsche 356 Carrera 2000 upto 1963

Diagram ref no 9

This small but crucial component acts as both a guide and locking element for the handbrake cable system. It helps position and secure the handbrake lever, allowing smooth engagement and precise locking when the parking brake is applied. The OE Match design guarantees consistent tension, proper alignment, and dependable lever operation—just like the original Porsche part.

Over time, the original guide bush or locking segment can wear, corrode, or lose its shape, leading to poor lever engagement or handbrake slippage. Installing this OE Match replacement restores the original geometry and locking precision, ensuring secure handbrake hold, smooth release, and long-lasting reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64424231

The product you are viewing cross references to these numbers

Guide bush/locking segment for handbrake cable.
The OE Match guide bush / locking segment is a replacement built to Porsche’s original specifications for 356 models. It replicates the genuine part’s fit and function, restoring smooth, secure handbrake operation and proper lever alignment within the handbrake cable assembly.

Fits:
for Right Hand Drive (RHD) cars
Porsche 356 A/540.1 1950 - 1955
Porsche 356 B / C 1950 - 1965
Porsche 356 Carrera 2000 upto 1963

Diagram ref no 9

This small but crucial component acts as both a guide and locking element for the handbrake cable system. It helps position and secure the handbrake lever, allowing smooth engagement and precise locking when the parking brake is applied. The OE Match design guarantees consistent tension, proper alignment, and dependable lever operation—just like the original Porsche part.

Over time, the original guide bush or locking segment can wear, corrode, or lose its shape, leading to poor lever engagement or handbrake slippage. Installing this OE Match replacement restores the original geometry and locking precision, ensuring secure handbrake hold, smooth release, and long-lasting reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64424232

The product you are viewing cross references to these numbers

Handbrake cable clip.



Fits:
Porsche 356 / 356 A/540.1 1950-59
Porsche 356 B / 356 Carrera 2000 1960-65

Click 'Zoom in' for large parts diagram.
Diagram ref no 31

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35624309

The product you are viewing cross references to these numbers

Clip for securing the hand brake cable. Introducing the enhanced emergency parking brake cable strap coupling designed specifically for Porsche 356 Pre A to Porsche 356 B T6 models manufactured between 1950 and 1963. This innovative device serves as a protective cover over the e-brake coupling located in the tunnel, where the single front cable splits into the rear cables. Its primary function is to securely hold the three cables in place within the coupling, ensuring optimal brake performance. The ingeniously designed coupling incorporates rear tabs equipped with two holes, facilitating easy attachment of the tension spring. This spring serves to maintain the necessary tension for smooth and efficient brake operation.

With this upgraded emergency parking brake cable strap coupling, Porsche 356 owners can experience enhanced safety and reliability during their driving experience, ensuring the braking system performs optimally across various road conditions.

Fits:
Porsche 356 Pre A (1948 - 1955)
Porsche 356 A (1956 - 1959)
Porsche 356 B (1960 - 1963)

Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35624309

The product you are viewing cross references to these numbers

Handbrake Cable Holder - Aluminium. 
Restore secure routing of the handbrake cable with this OE Match Handbrake Cable Holder – Aluminium, manufactured as a direct replacement. Produced to OE-style specifications, this aluminium cable holder is designed to securely locate and support the handbrake cable, ensuring correct alignment and preventing unnecessary movement during operation. Precision manufactured from high-quality aluminium for excellent strength, corrosion resistance, and durability, it provides an accurate fit for Porsche maintenance, repairs, and restoration projects.

Fits:

• Porsche 356 1950-55
• Porsche 356A 1955-59
• Porsche 356B 1959-63
• Porsche 356C 1963-65  

Diagram Ref No 24

The handbrake cable holder plays an important role in maintaining the correct routing of the parking brake cable, helping to ensure smooth cable movement and consistent handbrake operation. Over time, the original holder can become damaged, corroded, or distorted through age, vibration, or impact, allowing the cable to move out of position and increasing wear on both the cable and surrounding components. Replacing a worn holder restores proper cable support and contributes to reliable parking brake performance, making this OE Match component an ideal choice for Porsche maintenance, repairs, and restoration projects.  

What This Product Does:

• Secures the handbrake cable in its correct position.
• Maintains proper cable routing beneath the vehicle.
• Prevents unnecessary cable movement and vibration.
• Reduces wear on the handbrake cable and surrounding components.
• Supports smooth and consistent parking brake operation.
• Replaces damaged, corroded, or distorted cable holders.
• Provides an OE-style fit for straightforward installation.

Symptoms Of Wear Or Failure:

• Loose or poorly supported handbrake cable.
• Corroded or damaged aluminium cable holder.
• Distorted or cracked mounting bracket.
• Excessive movement or vibration of the handbrake cable.
• Premature wear to the handbrake cable outer casing.
• Rattling noises from beneath the vehicle.
• Damage identified during brake or underbody servicing.

Why Replacement Matters:

• The handbrake cable holder is a small but essential component that keeps the parking brake cable correctly aligned and securely supported throughout its length. If the holder becomes damaged or corroded, the cable can move excessively, causing increased wear, inconsistent handbrake operation, and unnecessary strain on the cable and associated brake components.
• Replacing a worn handbrake cable holder restores the correct cable routing, helping to ensure smooth parking brake operation while protecting the cable from premature wear. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match Handbrake Cable Holder – Aluminium provides reliable fit, performance, and durability for Porsche maintenance, repairs, and restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35624308

The product you are viewing cross references to these numbers

Handbrake cable lock nut.



Fits:
Porsche 356 A/540.01 1950-59
Porsche 356 B 1960-65
Porsche 356 Carrera 2000 >>1963

Click 'Zoom in' for large parts diagram.
Diagram ref no 38

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64442457100

The product you are viewing cross references to these numbers

Handbrake cable return spring.



Fits:
Porsche 356 A/540.01 1950-59
Porsche 356 B / 356 C 1960-65
Porsche 356 Carrera 2000 >>1963

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64442453100

The product you are viewing cross references to these numbers

Handbrake cable rubber boot.



Fits:
Porsche 356 A/540.1 1950-59
Porsche 356 B / 356 C 1960-65

Click 'Zoom in' for large parts diagram.
Diagram ref no 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35623204

The product you are viewing cross references to these numbers

Handbrake cable rubber boot
This OE match rubber boot is a direct replacement for the original Porsche component used in the handbrake cable system of 356 models. Installed at key entry/exit points - typically within the central tunnel - it provides a protective seal around the handbrake cable.
Sold individually

Fits:
Porsche 356 A/540.1 1950 - 1959
Porsche 356 B / 356 C 1960 - 1965

Diagram ref no 29

This rubber boot seals the opening where the handbrake cable passes through the chassis, preventing dirt, moisture, and debris from entering the tunnel. It helps protect the cable from contamination and reduces wear, ensuring smooth and reliable handbrake operation.

This small yet essential component is ideal for restoration or maintenance, preserving both the functionality and originality of the Porsche 356 chassis and braking system.

Function
•  Seals handbrake cable entry point within chassis
•  Prevents ingress of dirt, water, and debris
•  Protects cable from premature wear and corrosion
•  Maintains smooth cable movement and operation
•  Helps preserve internal tunnel components

Over time, rubber boots can crack, harden, or deteriorate due to age and exposure. A damaged boot allows dirt and moisture into the cable tunnel, which can lead to corrosion, increased friction, and reduced handbrake performance. Replacing it ensures proper sealing, protects internal components, and maintains reliable operation.

When to replace
•   Rubber is cracked, brittle, or split
•   Signs of dirt or moisture entering tunnel
•   During handbrake cable replacement or service
•   Increased resistance or stiffness in handbrake operation
•   As part of chassis restoration or refurbishment

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35623204

The product you are viewing cross references to these numbers

Handbrake cable rubber boot.



Fits:
Porsche 356 A/B/C

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64424216

The product you are viewing cross references to these numbers

Handbrake cable sleeve.



Fits:
Porsche 356 A/540.01 1950-59
Porsche 356 B 1960-65
Porsche 356 Carrera 2000 >>1963

Click 'Zoom in' for large parts diagram.
Diagram ref no 37

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64442457501

The product you are viewing cross references to these numbers

Handbrake Cable Suspension Strap.



Fits:
Porsche 356
Porsche 914

Click 'Zoom in' for large parts diagram.
Diagram ref no 40

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142434104

The product you are viewing cross references to these numbers

Handbrake Cable, Front.

Fits:
Porsche 356 A/540.1 1950-59
Porsche 356 B / C 1960-53

Diagram Ref No 26

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64424208

The product you are viewing cross references to these numbers