Seat Parts

Adaptor 760/1 for 200mm Mounting Points – Left & Right
Additional seat mounting adaptor set for 200mm mounting points, designed for use with compatible classic bucket seats. The 760/1 adaptor is required when fitting smaller seat models with 200mm mounting points, including the Nürburgring seats, where specified for the vehicle installation.

Supplied as a complete pair for both front seats.

Application: Additional seat mounting adaptor Suitable for smaller seat Nürburgring models.

Important Fitment Information:
This adaptor is an additional mounting component and does not replace the vehicle-specific seat adaptor.

When required, you will normally need:
   Vehicle-specific seat adaptor + Adaptor 760/1 + Seat sliders

Please check the requirements for your particular Porsche model and seat combination before ordering. You will receive one adaptor for the left seat and one adaptor for the right seat.

If you are unsure whether Adaptor 760/1 is required for your vehicle or seat combination, please contact the DESIGN911 team and we will be happy to assist.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

760

The product you are viewing cross references to these numbers

Button for seat backrest adjustment, Black.

Fits:
Porsche 356 B (1960 - 1963)
Porsche 356 C (1963 - 1965)

Diagram ref no 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452171500

The product you are viewing cross references to these numbers

Front bottom seat cushion replacement pad. Ideal for interior restoration projects.


Fits:
Porsche 356 A/B/C 1957>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452150142

The product you are viewing cross references to these numbers

Front seat backrest cushion replacement pad. Ideal for interior restoration projects.


Fits:
Porsche 356 A/B/C 1957>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452150542

The product you are viewing cross references to these numbers

Stainless Steel Headrest Knob – 6mm thread

Restore the finishing touches of your classic Porsche interior with this OE Match Stainless Steel Headrest Knob. Precision manufactured to complement the original factory design, this high-quality replacement knob is the ideal solution for replacing worn, damaged or missing headrest adjustment hardware on Porsche 356, 911 and 912 models.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 356A 1955-59
• Porsche 356B 1959-63
• Porsche 356C 1963-65

Although small, the headrest knob is a prominent interior component that contributes to both the appearance and functionality of your seats. Over decades of use, original knobs can become scratched, corroded, dented or lost during seat refurbishment. Replacing them with a quality OE Match component helps restore the authentic look of your Porsche interior while ensuring smooth and reliable headrest adjustment.

Manufactured from durable stainless steel, this replacement headrest knob offers excellent corrosion resistance, long-lasting durability and an attractive factory-style finish, making it ideal for concours restorations, sympathetic refurbishments and everyday classic Porsche ownership.

What Does the Headrest Knob Do?

The headrest knob forms part of the seat adjustment mechanism, allowing the headrest to be securely adjusted or removed when required. It provides a comfortable grip for operation while maintaining the clean, period-correct appearance of the seat.

Why Replace the Headrest Knob?

Years of regular use and exposure can lead to deterioration of interior hardware. Common reasons for replacement include:

• Scratched or worn finish
• Corrosion or surface pitting
• Dented or damaged knob
• Missing original component
• Seat restoration or upholstery replacement
• Completing a concours-standard interior refurbishment

Replacing worn seat hardware is an effective way to improve both the appearance and usability of your Porsche interior.

Features

• Precision manufactured from high-quality stainless steel
• Corrosion-resistant finish
• Factory-style appearance
• Durable construction for long service life
• Smooth operation of the headrest adjustment mechanism
• Ideal for restoration and refurbishment projects
• Easy installation using the original mounting arrangement
  
  

Why Choose OE Match Interior Components?

OE Match interior components are designed for Porsche owners seeking authentic appearance, excellent fitment and dependable quality. Manufactured to complement the original factory design, these components help preserve the character of classic Porsche interiors while offering the durability expected from modern manufacturing techniques. Whether you're completing a full restoration or replacing individual trim pieces, OE Match parts provide an ideal balance of originality and reliability.

OE Match Porsche Seat Hardware & Interior Restoration Parts

The finer details are what separate a good restoration from an exceptional one. Interior hardware such as headrest knobs, seat fittings and trim components play an important role in preserving the authentic appearance and functionality of your classic Porsche.

At Design911, we offer a comprehensive selection of OE Match seat hardware and interior restoration parts for Porsche 356, 911 and 912 models. Every component is chosen to provide accurate fitment, premium materials and a factory-inspired finish, helping enthusiasts and professional restorers achieve outstanding results.

Replacing worn or damaged seat hardware not only enhances the appearance of the interior but also improves the operation of adjustable seat components, ensuring your Porsche remains both comfortable and true to its original design.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452108805

The product you are viewing cross references to these numbers

Knob for reclining seats.

Fits:
Porsche 356 B-T6 / 356 C 1960-65

Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452137106

The product you are viewing cross references to these numbers

Knob for Seat Adjusting.



Fits:
Porsche 356 All

This knob is NOT painted but made out of full colour material. CNC machined and full polished. Made to Porsche Specs.

Available in the 4 original colours: Black, Beige, Ivory and Grey.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

644521137106

The product you are viewing cross references to these numbers

Knob for Seat Recliner.

Fits:
Porsche 356 All

This knob is NOT painted but made out of full colour material. CNC machined and full polished. Made to Porsche Specs.

Available in the 4 original colours: Black, Beige, Ivory and Grey.

Diagram ref no 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452171500

The product you are viewing cross references to these numbers

Lower seat rail Each. Price is Each.



Fits:
Porsche 356C
Porsche 911 912 1965-1973

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452130106

The product you are viewing cross references to these numbers

Seat adaptor set, Left & Right
Seat adaptor set designed for Porsche 356 C models from T6 onward, suitable for vehicles built from approximately 1960.  Supplied as a pair, with one adaptor for the left-hand seat and one for the right-hand seat.

Vehicle Fitment:
Porsche 356 C from T6 onward
Year: From approx. 1960

Set Includes:
 1 x Left seat adaptor
 1 x Right seat adaptor

Suitable Seats: Nürburgring / Nürburgring (R) / LeMans / Monza / Spider  / Rally ST / Modell14

Important: When fitting the smaller Nürburgring seats, Adaptor 760/1 for 200mm mounting points must also be ordered.

Please note that seat sliders and adaptors are normally both required unless otherwise stated.

 If you are unsure which seat adaptor is correct for your Porsche, please contact the DESIGN911 team and we will be happy to assist with compatibility.

Seat frame in aluminium. Porsche 356 Speedster seat
Sold each - 2 required per car

Fits
Porsche 356B Speedster / Carrera GT - 1959 to 1963
Porsche 356C Speedster / Carrera GT - 1963 to 1965

Seat frame for Speedster seat made from aircraft grade aluminium

Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452101142

The product you are viewing cross references to these numbers

Seat frame rail with adjuster. Porsche 356 Speedster seat

Fits
Porsche 356B Speedster / Carrera GT - 1959 to 1963
Porsche 356C Speedster / Carrera GT - 1963 to 1965

Finished in stove enameled gloss black

Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452101142

The product you are viewing cross references to these numbers

Seat lever spring.



Fits:
Porsche 356 B-T6 / 356 C
Porsche 911 / 912 (1965-68)

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452133

The product you are viewing cross references to these numbers

  Seat Rails / Sliders Set, Left & Right

Seat rail set designed for the installation of compatible sports and classic seats, providing the sliding mechanism required to adjust the seat position.

The rails are supplied as a complete set for both front seats, with components for the left and right seat.

Product Details:

    •   Product: Seat Rails / Sliders
    •   Set: Left + Right
    •   Quantity: Complete set for both front seats
    •   Application: Seat installation and adjustment
    •   Suitable for compatible seat installations

These seat rails are intended to be used with the appropriate seat and vehicle-specific seat adaptor where required.

You will receive a set for both the left and right seat.

If you are unsure which seat rails or adaptors are required for your vehicle and seat combination, please contact the DESIGN911 team and we will be happy to assist with fitment and compatibility.

Seat tension / adjuster spring, 172 mm.
Sold each.  Usually two springs are needed per vehicle for both driver’s and passenger’s seat assemblies.

This OE-Match tension spring is a high-quality replacement that replicates the original factory spring used in the seat adjuster and tensioning mechanism of classic Porsche 356.

Fits:
Porsche 356 B T5 1960 - 1965
Porsche 356 CARRERA GT 1600 1960 - 1965

Diagram ref no 2 / or 10

This spring maintains the proper tension in the seat adjuster system, ensuring that the seat slides and locks smoothly and holds securely in place. It helps prevent the seat from drifting or loosening under load.

Over time, the original spring may weaken, corrode, or lose tension, causing loose movement, poor locking, or rattling in the seat mechanism. Replacing it with a new OE-Match spring restores firm tension, stability, and smooth, precise seat adjustment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64452133300

The product you are viewing cross references to these numbers

Solitude Seat Frame and Foam Kit - 3 Point Seat Belt
Sold each

The Solitude Seat Frame and Foam Kit provides an untrimmed fixed-seat foundation for Porsche 356 models built from 1950 to 1965. Configured for a 3-point seat-belt installation, it allows the upholstery material, stitching, piping and final finish to be selected separately for a restoration or individually specified interior. 

Fits

• Porsche 356 1950–55
• Porsche 356A 1955–59
• Porsche 356B 1959–63
• Porsche 356C 1963–65

What This Product Does

A seat frame kit supplies the principal structural and cushioning components required before trimming. Instead of replacing the seat with a pre-upholstered unit, the frame, suspension and shaped padding can be handed to a vehicle trimmer for covering in suitable leather, vinyl or fabric. This enables the finished seat to complement the materials and detailing already used within the cabin.

The Solitude has a period-influenced profile developed for classic Porsche 356 Roadster, Speedster, GT and Outlaw-style projects. Its fixed bucket form provides more defined side support than a conventional comfort-seat shape while retaining proportions appropriate for a classic interior.

Functions

• Forms the structural and padded base for a complete upholstered seat
• Uses flexible suspension belts beneath the seating area
• Provides shaped cushioning for the base, backrest and side sections
• Allows upholstery, stitching and piping to be specified independently
• Supports a more defined seating position within a classic 356 cabin
• Accommodates an installation intended for 3-point seat belts

Technical Details

• Protected tubular-steel frame
• Fixed bucket-seat construction without an integrated reclining mechanism
• Duralastic suspension belts beneath the cushion
• Fire-resistant foam material
• Includes frame, suspension belts, side and back foam, seat cushion and headrest
• Approximate untrimmed weight: 7.3 kg

Symptoms of Fault

• Seat foam has become hard, compressed or uneven
• The cushion sags or offers inconsistent support
• Corrosion, fatigue or earlier repairs have weakened the existing frame
• The backrest or side padding no longer retains its shape
• Worn upholstery has exposed damaged foam or suspension parts
• A complete foundation is required for a seat restoration

Why Replacement Matters

Renewing the frame, flexible suspension and padding together gives the trimmer a stable, correctly shaped base for the new upholstery. It also prevents fresh covers from being fitted over deteriorated foam or compromised structural components. As this is a fixed seat, the installed height and backrest angle are established through the selected runners, brackets and mounting arrangement. Seat mounts and belt anchorages are safety-critical, so suitable vehicle-specific hardware should be used and the completed installation checked by an experienced specialist.

FAQs

• Is upholstery supplied? No. The kit is untrimmed, allowing a vehicle trimmer to apply the chosen covering and finishing details.
• Which components are included? The kit comprises the tubular frame, suspension belts, shaped side and back foam, seat cushion and headrest.
• Does the backrest recline? No. It uses a fixed bucket structure; the final tilt and seating height depend on the installation hardware.
• Are runners and mounting brackets included? Suitable runners, brackets and fixings should be selected separately for the vehicle and required seating position.
• Can access behind the seat be retained? A compatible tilting mounting arrangement may be used where appropriate, subject to the vehicle and installation requirements.