Bonnets / Locks & Latches

Catch on front bonnet.

Fits:
Porsche 911 1974-89
Porsche 930 Turbo 3.0L / 3.3L 1975-89

Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151105103

The product you are viewing cross references to these numbers

Front bonnet catch - upper lock / striker
This bonnet catch mounts at the front body/lock area and interfaces with the bonnet latch mechanism to secure the hood when closed. It’s made to match the original fitment, mounting points, and engagement geometry for straightforward installation.

Fits:
Porsche 911 1974 - 1989
Porsche 930 Turbo 3.0L / 3.3L 1975 - 1989

Diagram ref no 15

It provides the secure locking interface that holds the front bonnet shut under vibration and driving loads. A correct-fitting catch helps prevent bonnet movement, rattles, and unreliable closure.

Function: The catch/striker works with the bonnet latch to create a positive, repeatable lock-up. By maintaining proper alignment and clamping, it supports safe bonnet retention and smooth opening/closing operation.

Bonnet catches can wear, corrode, or become misaligned over time, leading to poor latch engagement, difficult closure, or unwanted bonnet movement. Replacing with an OE Match catch restores correct alignment and reliable locking - important for safety and proper panel fit.

When to replace:
•  Bonnet doesn’t latch securely or pops to the safety catch
•  Excessive play/rattle at the bonnet front edge
•  Visible corrosion, bending, or worn contact surfaces
•  After front-end bodywork or latch alignment issues
•  During restoration or lock mechanism overhaul

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151105103

The product you are viewing cross references to these numbers

Door Handle Set Complete - Left and right handle with lo



Fits:
Porsche 911 1970-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG53106000

The product you are viewing cross references to these numbers

Doors, Ignition, Bonnet, Glovebox Lock Set Complete
with Black Handles



Inc: 2 X door locks, 1 X ignition lock, 1 X glove box lock 1 X bonnet opening handle and 3 matching keys.

Fits:
Porsche 911 1965-76
Porsche 911 1978-89
Porsche 911 Turbo 3.3L 1978-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91153890113

The product you are viewing cross references to these numbers

Doors, Ignition, Bonnet, Glovebox Lock Set Complete.
with Chrome Handles



Inc: 2 X door locks, 1 X ignition lock, 1 X glove box lock 1 X bonnet opening handle and 3 matching keys.

Fits:
Porsche 911 1965-76
Porsche 911 1978-89
Porsche 911 Turbo 3.3L 1978-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91153890114

The product you are viewing cross references to these numbers

Engine Lid Handle Grommet.
The Porsche Engine Lid Handle Grommet is a genuine OEM rubber spacer designed to secure and protect the engine lid handle on classic Porsche models. This grommet sits between the handle and the decklid panel, preventing metal-to-metal contact, reducing vibration, and ensuring a flush, factory-correct fit.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) RS 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) GT2 1994-97
• Porsche 993 (911) TURBO S 1994-97

What This Product Does:

The grommet spaces and cushions the handle / pull / grab post on the engine lid (rear deck / rear cover), ensuring that the handle is mounted securely and with the correct clearance. It also isolates the handle from metal-to-metal contact, preventing wear, chafing, vibrations, or damage to the lid surface or paint.

Symptoms & Signs It Needs Replacing:

• The engine lid handle feels loose, wobbles or moves when tugged.
  
• Misalignment: the handle may not sit flush with the lid or tilt slightly.
  
• Noise or vibration from the lid area when driving or over bumps.
  
• Wear marks or damage around the handle mounting hole where the grommet should sit.
  
• The grommet is visibly cracked, deformed, or missing altogether.

Why Replacement Matters:

• Preserves structural integrity: ensures the handle is securely anchored without damaging the lid material.
  
• Prevents damage to the lid surface or paint from metal on metal contact or rubbing.
  
• Restores proper fit & feel of the handle — no looseness, no rattles, clean alignment.
  
• Low cost preventive fix: rather than replace more expensive components later, this small grommet helps avoid long-term damage.
  
  

Diagram Ref No 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151253100

The product you are viewing cross references to these numbers

Extended hood latch.

Fits:
Porsche 911 1974 - 1989 
Porsche 964

Extended hood latch for short hoods with long hood extensions We have extended the safety hook on these latches to allow a larger gap for your hand when opening the hood. 

Front bonnet for the early Porsche 911's long bonnet type. Reproduction



Fits:
Porsche 911 1965-73

Material: Steel

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151101024GRV

The product you are viewing cross references to these numbers

Front Bonnet In Aluminium.
The OE Match Front Bonnet in Aluminium is a premium-quality replacement body panel designed to restore the original appearance, fit and functionality of compatible classic Porsche models. Manufactured to OE specifications for fit, profile and construction, this lightweight aluminium bonnet faithfully reproduces the original factory design while offering excellent strength, corrosion resistance and reduced weight compared to steel alternatives.  

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F) 

Diagram Ref No 1 

Manufactured from high-grade automotive aluminium, the bonnet is precision-pressed to replicate the original contours, panel lines and mounting points for an accurate OE-style fit. Supplied in a bare metal finish ready for preparation and painting, it is designed to accept the original hinges, latch mechanism, bonnet catch, seals and trim, making it the ideal replacement for accident repairs, corrosion restoration or concours-quality rebuilds.  

What This Product Does:

• Protects the front luggage compartment and associated components.
• Provides secure closure of the front bonnet opening.
• Restores the original body lines and appearance.
• Supports the correct operation of the bonnet latch and hinges.
• Offers lightweight aluminium construction for reduced vehicle weight.
• Helps maintain correct panel alignment and fit.
• Provides direct OE-style fitment.
• Forms an essential part of the vehicle's front body structure.

Symptoms Of Wear Or Failure:

• Corrosion or rust affecting the panel.
• Dents, creases or accident damage.
• Poor bonnet alignment or uneven panel gaps.
• Difficulty opening or closing the bonnet.
• Distorted or warped panel.
• Damaged hinge or latch mounting points.
• Excessive vibration or movement while driving.
• Poor paint finish due to corrosion or previous repairs.
• Water ingress caused by poor panel fitment.
• Reduced vehicle appearance and originality.

Why Replacement Matters:

• The front bonnet is continually exposed to road debris, moisture, UV exposure and everyday use. Over time, accident damage, corrosion, fatigue or poor previous repairs can affect its structural integrity, alignment and appearance.
• A damaged bonnet can lead to poor panel fit, difficulty operating the latch mechanism and reduced protection for the front luggage compartment. Incorrect alignment may also allow water ingress, increase wind noise and detract from the appearance and value of a classic Porsche.
• Replacing a worn or damaged bonnet with the OE Match Aluminium Front Bonnet restores the vehicle's original appearance, fit and functionality. Manufactured from lightweight automotive-grade aluminium to OE specifications, it provides factory-style fitment, excellent corrosion resistance and long-lasting durability, making it the ideal choice for Porsche restoration, accident repair and high-quality bodywork projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151101024GRV

The product you are viewing cross references to these numbers

front bonnet, aluminum. For racing cars only
fragile alu material, total weight 5.10 kg

This is a aluminum bonnet on a aluminum frame



Fits:
Porsche 911 (2.7L-3.3L) 1973-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151101004GRV

The product you are viewing cross references to these numbers

Front Bonnet.
The OE Match Front Bonnet is a premium-quality replacement body panel designed to restore the original appearance, fit and structural integrity of the front luggage compartment on compatible classic Porsche models. Manufactured to OE specifications for dimensions, contours and mounting points, this bonnet provides an accurate factory-style replacement for damaged, corroded or accident-affected original panels.  

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)  

Manufactured from high-quality automotive-grade pressed steel, the bonnet offers exceptional strength, rigidity and long-term durability while maintaining the correct panel profile and factory body lines. Supplied in a protective grey primer finish, it is ready for final preparation and painting to match the vehicle. Precision-pressed to OE standards, it ensures excellent alignment with the wings, front latch mechanism and surrounding body panels for a professional-quality restoration.  

What This Product Does:

• Restores the original appearance of the front luggage compartment.
• Protects the luggage compartment and front body structure.
• Provides a secure mounting point for the bonnet latch and hinges.
• Maintains correct panel alignment and body gaps.
• Supports proper fitment of bonnet seals and trim components.
• Replaces damaged, corroded or accident-affected bonnet panels.
• Restores factory body styling and structural integrity.
• Forms an essential part of the vehicle's front body assembly.

Symptoms Of Wear Or Failure:

• Visible rust or corrosion.
• Dents, creases or accident damage.
• Poor bonnet alignment or uneven panel gaps.
• Difficulty opening or closing the bonnet.
• Damaged bonnet latch mounting area.
• Paint bubbling caused by corrosion beneath the surface.
• Distorted panel affecting surrounding body fitment.
• Excessive vibration while driving.
• Water entering the luggage compartment due to poor panel fit.
• Cosmetic deterioration affecting the vehicle's appearance.

Why Replacement Matters:

• The front bonnet is continually exposed to weather, road debris, vibration and accidental impact. Over time, corrosion, fatigue or collision damage can affect both its structural integrity and appearance, reducing the quality of panel fitment and potentially allowing water into the luggage compartment.
• A damaged bonnet can prevent correct latch engagement, compromise body alignment and negatively affect the appearance and value of the vehicle. Corrosion left untreated may spread into adjacent body panels, increasing restoration costs and reducing the originality of a classic Porsche.
• Replacing a worn or damaged front bonnet restores the factory appearance, structural strength and correct panel alignment of the front bodywork. The OE Match replacement provides OE-style fitment, precision-pressed steel construction and a high-quality grey primer finish, making it the ideal choice for concours restorations, accident repairs and long-term preservation of your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151101004GRV

The product you are viewing cross references to these numbers

Front bonnet for the early Porsche 911's long bonnet type.



Fits:
Porsche 911 1965-73

Material: Metal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151101024GRV

The product you are viewing cross references to these numbers

Front bonnet for the early Porsche 911's long bonnet type. Reproduction



Fits:
Porsche 911 1965-73

Material: Steel

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151101024GRV

The product you are viewing cross references to these numbers

Front bonnet. Reproduction



Fits:
Porsche 911 1974-89

Material:
Made from Metal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151101004DSK

The product you are viewing cross references to these numbers

Front bonnet complete lock assembly.
OE Match front bonnet (hood) complete lock assembly designed as a direct-fit replacement for the original Porsche lock mechanism used on early Porsche 911 (1965–1973) models. The complete assembly includes the lock mechanism, striker and catch, mounting points, and connection interfaces for the bonnet release cable - ready for direct installation without modification.

Fits:
Porsche 911 1965 - 1973

Diagram ref no 10 and 12

The front bonnet lock assembly secures the front lid (bonnet/hood) in the closed position and interfaces with the inner release cable to allow controlled opening from inside the cabin or bumper area. When the release cable is pulled, the latch disengages and allows the bonnet to pop open. The assembly ensures the hood stays closed at highway speeds and only opens when the correct release action is taken.

Function:
•  Primary latch mechanism: Holds the front bonnet securely closed
•  Release engagement: Works with the inner release cable to allow bonnet opening
•  Precise engagement geometry: Ensures the hood seats correctly every time
•  Durable closure: Resists vibration, corrosion, and repeated use
•  Safety locking: Prevents unintended bonnet opening while driving.

A proper lock assembly is important for safety, security, and fitment - a worn or faulty latch can make the bonnet difficult to open or close securely.

Over time the original front bonnet lock can suffer from:
•  Wear and play in the latch mechanism
•  Corrosion from exposure to moisture
•  Sticky or stiff operation
•  Cable and striker misalignment
•  Difficulty opening or closing the hood.

A worn lock can make it hard to access the front luggage compartment or cause the hood to rattle or fail to stay securely closed. Replacing it with an OE Match assembly restores smooth, reliable latching performance - improving both function and safety.

When to replace. Replace the front bonnet lock assembly when:
•  The latch doesn’t hold the bonnet securely
•  The release cable slips or sticks
•  You hear rattling or noise from the front hood at speed
•  The lock shows signs of rust or binding
•  You are restoring or refreshing the front end of a classic 911

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151105999

The product you are viewing cross references to these numbers

Front bonnet hinge.

Fits:
Porsche 911 2.0-3.3 01/1963-07/1989
Porsche 964 3.3-3.6 12/1988-06/1994
Porsche 993 3.6-3.8 10/1993-09/1997

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99351103

The product you are viewing cross references to these numbers