Parts - Screws / Washers etc

Front bumper washer.
SOLD EACH.



Fits:
Porsche 911 1974-89
Porsche 930 3.0L, 3.3L 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 16.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90002500903

The product you are viewing cross references to these numbers

Front bumper washer. 
Price is for each



Fits:
Porsche 911 1978-89
Porsche 930 3.3L 1978-89

Click 'Zoom in'  for large parts diagram.
Diagram ref no 26.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N01166516

The product you are viewing cross references to these numbers

Front bumper washer. 
This Porsche Genuine OE Front Bumper Washer is used with bolts when installing or re-assembling the front bumper. This small but important component is used in the front bumper assembly of classic Porsche models to provide a secure, vibration-resistant connection between bolts and bodywork elements.
Sold individually

Fits:
Porsche 911 1984 - 1989
Porsche 930 3.3L 1984 - 1989

Diagram ref no 22.

Fitment / Position on Car:
•  Installed on: Front bumper mount points
•  Location: Between the head of a fastener bolt/nut and the bumper or body panel surface
•  Required per car: Multiple washers are used in the bumper mount hardware set (quantity varies by configuration)
•  Assembly role: Provides secure, even clamping against the sheet-metal brackets and trim

Fasteners and washers might seem minor, but they are critical for structural integrity, consistent panel fitment, and vibration resistance. A correct OE washer maintains the proper seat and clamping force of bumper bolts, helps prevent loosening over time, and preserves the original factory appearance and function - essential in restoration and daily use alike.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90002500703

The product you are viewing cross references to these numbers

Front bumper washer. 
OE Match front bumper washer for Porsche 911 (1984–1989), direct-fit replacement hardware that supports proper bumper fastener load distribution and secure exterior trim mounting.
Sold individually

Fits:
Porsche 911 1984 - 1989
Porsche 930 3.3L 1984 - 1989

Diagram ref no 22.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90002500703

The product you are viewing cross references to these numbers

Bumper Impact Tube Rubber Sleeve - Fits Front and Rear
Sold Each

Restore the correct fit and protection of your Porsche's bumper assembly with this OE Match Rubber Sleeve, designed for the bumper impact tube on classic Porsche 911 models. Manufactured to OE specifications, this high-quality replacement sleeve provides the correct cushioning and sealing between the bumper impact tube and surrounding body components, helping to maintain proper alignment while protecting against dirt, moisture and premature wear.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Diagram ref no 18

Whether you're carrying out a full restoration or replacing worn bumper hardware during routine maintenance, this OE Match rubber sleeve delivers the fit and durability expected from an original-style component.

What Does the Rubber Sleeve Do?

The rubber sleeve fits around the bumper impact tube and acts as a protective interface between the bumper mounting system and the vehicle body. Its functions include:

• Providing a flexible seal around the impact tube.
• Preventing metal-to-metal contact between components.
• Reducing vibration and movement within the bumper assembly.
• Helping keep dirt, moisture and road contaminants away from the mounting area.
• Maintaining the correct positioning and appearance of the bumper.

Although small, this component plays an important role in preserving both the functionality and longevity of the bumper mounting system.

Why Do Rubber Sleeves Fail?

Like all rubber components, bumper impact tube sleeves naturally deteriorate with age and environmental exposure. Common causes of failure include:

• UV exposure causing the rubber to harden and crack.
• Heat cycles leading to loss of elasticity.
• Oil, grease and road chemicals degrading the material.
• Moisture ingress accelerating ageing.
• Compression over many years causing permanent deformation.
• Damage during bumper removal or accident repairs.

As the sleeve deteriorates, it may split, perish or lose its ability to seal and cushion the impact tube effectively.

When Should the Rubber Sleeve Be Replaced?

The rubber sleeve should be inspected whenever the front or rear bumper is removed, particularly during restoration work, accident repairs or bumper refurbishment. Replacement is recommended if the sleeve shows signs of:

• Cracking or splitting.
• Hardening or loss of flexibility.
• Perishing or surface deterioration.
• Distortion or compression.
• Missing or damaged sealing surfaces.

Replacing aged rubber components during restoration helps preserve the original fit, reduces future maintenance and ensures the bumper assembly remains securely supported.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150522100

The product you are viewing cross references to these numbers

" T " screw for front / rear bumper deco moulding. 
8 per car. Price shown is for each.

Fits:
Porsche 911 1965-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 4 (front) / 6 (rear)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150515520

The product you are viewing cross references to these numbers

" T " Screw For Front / Rear Bumper Deco Moulding.
The OE Match "T" Screw for Front / Rear Bumper Deco Moulding is a premium-quality replacement fixing designed to securely retain the decorative bumper mouldings on compatible Porsche models. Manufactured to OE specifications for fit, strength and durability, this precision-engineered T-shaped fastener provides a secure mounting point for the front and rear bumper trim, helping maintain the original appearance and correct fitment of the bumper assembly.  
Sold Each.
x8 Required Per Car.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)  

Diagram Ref No 4 And 6

Manufactured from high-quality corrosion-resistant steel, the T screw is engineered to withstand continual exposure to road spray, moisture, vibration and varying temperatures. Its precision-machined thread and OE-style T-head design ensure correct engagement with the bumper moulding and retaining hardware, providing reliable installation during restoration, accident repair or routine trim replacement.

What This Product Does:  

• Secures the front and rear bumper decorative mouldings.
• Maintains correct alignment of the bumper trim.
• Prevents movement or loosening of the moulding.
• Provides a secure fixing point for the bumper assembly.
• Helps preserve the factory appearance of the vehicle.
• Resists corrosion and vibration during normal driving.
• Provides direct OE-style fitment.
• Forms an essential part of the bumper trim mounting system.

Symptoms Of Wear Or Failure:

• Loose or rattling bumper mouldings.
• Misaligned decorative bumper trim.
• Missing or damaged fixing hardware.
• Corrosion affecting the fastener.
• Stripped or damaged threads.
• Difficulty securing the moulding correctly.
• Trim lifting away from the bumper.
• Increased vibration or movement of the moulding while driving.
• Cosmetic deterioration due to insecure trim.
• Risk of bumper moulding becoming detached.

Why Replacement Matters:

• The bumper moulding fixing hardware is continually exposed to water, road salt, dirt, vibration and temperature changes. Over time, the original fasteners can corrode, seize, lose their clamping force or become damaged during removal, reducing their ability to securely retain the decorative mouldings.
• A damaged or missing T screw can allow bumper trim to become loose, vibrate or separate from the bumper, affecting both the appearance of the vehicle and the security of the moulding. Reusing worn fixings during restoration may also prevent correct alignment and lead to premature trim failure.
• Replacing worn or damaged fasteners with the OE Match "T" Screw restores secure attachment of the front and rear bumper decorative mouldings. Manufactured to OE standards from premium corrosion-resistant materials, this replacement fixing provides factory-style fitment, reliable retention and long-lasting durability, making it the ideal choice for Porsche restoration, repair and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150515520

The product you are viewing cross references to these numbers

Speed nut clip - air intake guide / rear bumper cover mounting.
A high-quality M5 captive speed nut designed for secures components such as the air intake guide and rear bumper cover mounting on the Porsche 928. This speed nut replicates Porsche’s original fastening standard, ensuring correct thread size, retainer design and installation fit.
Sold each.

Fits:
Porsche 928 1987 - 1995

• Thread size: M5
• Application: air intake guide (diagram ref no 8) and rear bumper cover mounting (diagram ref no 22)

This speed nut provides a secure, vibration-resistant anchoring point for parts that require frequent removal or tight fit-up. The captive design ensures the nut remains in position during assembly and removal processes, reducing fastener loss and ensuring consistent mount integrity.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99950731212

The product you are viewing cross references to these numbers

Tapping screw B4,8 x 13 - Multiple applications



Fits:
Porsche 911 - 1970 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997
Porsche 928 - 1983 to 1995



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90038400601

The product you are viewing cross references to these numbers

Valance fixing clamps



Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150302300

The product you are viewing cross references to these numbers