Wings Front & Parts

Washer bottle filler neck cap / Windscreen washer reservoir cap.
Washer bottle filler neck cap is an replacement designed to close and seal the windscreen washer fluid reservoir on classic Porsche models. It reproduces the original cap’s diameter, profile and locking design, ensuring a snug fit on the filler neck and a neat, factory-correct appearance in the luggage compartment.

Fits:
Porsche 911 1974 - 1989
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998

Diagram Ref no 9.

This cap seals the top of the washer fluid reservoir to:
• Prevent washer fluid from splashing or spilling out of the tank.
•  Keep dirt, dust and moisture from entering the washer system.
•  Help maintain correct fluid level and cleanliness for reliable jet performance.

Over time, the original washer bottle cap can become brittle, cracked, loose or go missing altogether. When that happens:
•  Washer fluid can splash or slosh out under braking or cornering.
•  Dirt and debris can fall into the tank, potentially clogging jets or damaging the pump.
•  You may notice more frequent low fluid levels or contamination in the reservoir.

Replacing it with a correct cap restores a secure closure, protects the washer system, and keeps the front luggage area looking complete and factory-correct. 

You should replace the cap if the original is missing, cracked, or no longer clips on securely. A new cap is also recommended if dirt or debris has entered the washer tank due to poor sealing. It’s an ideal replacement during restoration or detailing work as well, especially when aiming to keep the luggage compartment on a classic 911, 964 or 993 looking fully OEM and complete.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96420150700

The product you are viewing cross references to these numbers

Chrome Wheel Arch Moulding Set (Set of 4) 

Restore the elegant factory appearance of your classic Porsche with this OE Match Chrome Wheel Arch Moulding Set. Manufactured to replicate the original factory specification, this complete 4-piece set provides the correct fit, profile and bright anodized  finish for an authentic restoration.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Designed to fit all four wheel arches, these mouldings enhance the distinctive styling of early long-wheelbase Porsche 911 models while protecting the edge of the wheel arch from minor chips and abrasion. Whether you're undertaking a concours restoration or replacing damaged original trim, this OE Match set delivers the quality, appearance and precision fit expected from an original-style replacement.

Kit Contents

This complete OE Match kit includes:

• 2 × Front chrome wheel arch mouldings
• 2 × Rear chrome wheel arch mouldings

Complete 4-piece set for one vehicle.

What Do the Wheel Arch Mouldings Do?

Wheel arch mouldings provide both decorative and protective benefits.

Their primary functions include:

• Finishing the edge of each wheel arch with a factory-style chrome trim.
• Enhancing the classic appearance of the Porsche 911 bodywork.
• Helping protect painted wheel arch edges from minor stone chips and scuffing.
• Concealing small imperfections along the arch lip.
• Restoring the original period-correct styling of early Porsche 911 models.

The bright chrome trim is one of the defining exterior details found on many classic Porsche restorations.

Why Do Wheel Arch Mouldings Need Replacing?

Original mouldings are exposed to road debris, weather and regular cleaning throughout their service life.

Common causes of deterioration include:

• Chrome pitting and corrosion.
• Scratches and impact damage.
• Dents caused by stones or minor knocks.
• Distortion from incorrect removal.
• Loose or damaged fixing clips.
• Loss of shine through age and environmental exposure.

Damaged or dull mouldings can significantly reduce the visual appeal of an otherwise well-restored Porsche.

When Should They Be Replaced?

Replacement is recommended when:

• Chrome plating has become pitted or corroded.
• The mouldings are bent, dented or distorted.
• Original trim is missing.
• Repainting or restoring the bodywork.
• Replacing damaged fixing clips or trim.
• Completing a concours or factory-correct restoration.

Replacing all four mouldings together ensures a consistent finish and restores the classic lines of the Porsche 911.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155912551SET

The product you are viewing cross references to these numbers

Wing joining plate with holes for oil hoses. FRONT, RIGHT.



Fits:
Porsche 911 (with wing mounted oil cooler) 2.0-2.4 08/68-07/73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150105401

The product you are viewing cross references to these numbers

Wing joining plate without holes for oil hoses. FRONT, RIGHT. Made like original for these years 8/68-7/71.



Fits:
Porsche 911 E/T 2.0L-2.2L 08/1968-07/1971

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150105303

The product you are viewing cross references to these numbers

Wing joining plate, RIGHT FRONT, with fixed nuts. Painted aluminized steel



Fits:
Porsche 911 2.0-2.7 08/71-07/73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150105401

The product you are viewing cross references to these numbers

Wing / Fender joining plate.



Fits:
Porsche 911 08/1973 - 07/1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150105

The product you are viewing cross references to these numbers

Wing / Fender joining plate.



Fits:
Porsche 911 08/1968 - 07/1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150105

The product you are viewing cross references to these numbers

Wing / Fender joining plate.

Fits:
Porsche 911 - 1973 to 1989

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150105

The product you are viewing cross references to these numbers

Wing / Fender joining plate.
Left or right side. New improved version - fits SWB



Fits:
Porsche 911 / 912 01/1963-07/1968 SWB

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150105

The product you are viewing cross references to these numbers

Fender Joining Plate.



Fits:
Porsche 911 / 912 1964-68

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150105

The product you are viewing cross references to these numbers

Wing flare, front, RS/Singer look, for cutting off and welding on.



Fits:
Porsche 911 2.0-2.4 01/63-07/73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050330

The product you are viewing cross references to these numbers

Wing flare, front, metal, ST version.



Fits:
Porsche 911 2.0L-2.4L 01/1963-1973

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150330

The product you are viewing cross references to these numbers

Wing flare kit, steel, 2.8 RSR / 3.0 RS version

Fits:
Porsche 911 - 1965 to 1973

Precision-engineered and track-inspired these are built for those who demand more.  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150390500

The product you are viewing cross references to these numbers

Wing front extension, allows extension for narrow body to wide body or repair panel for turbo wheel arch.



Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050330

The product you are viewing cross references to these numbers

Wing Petrol End Plate.



Fits:
Porsche 911 1974>>

Diagram ref No. 51

Left or right.
Please select below.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150331

The product you are viewing cross references to these numbers

Wing petrol flap rubber.

Fits:
Porsche 356 B / C
Porsche 911 1965-89

Diagram Ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120127902

The product you are viewing cross references to these numbers