Middle Section

Support bracket by Porsche is specified for listed Porsche 911 and 912 Coupe applications from 1965–89. 

Fits

• 911 1965–1968 2.0L / 912 SWB (F)
• 911 1968–1973 2.2L / 2.4L / 2.7L RS LWB (F)
• 911 1974–1977 2.7L / 1976–77 3.0 Carrera
• 911 1975–1977 3.0L Turbo (930)
• 911 1978–1983 3.0L / SC
• 911 1978–1989 3.3L Turbo (930)
• 911 1984–1986 3.2L
• 911 1987–1989 3.2L G50
  
  Diagram Ref No 33

What This Product Does

The bracket supports the associated body assembly in the areas identified by the Porsche exploded diagrams. It is intended for replacing original metal that has become corroded, distorted or unsuitable for reuse during chassis and body restoration.

Functions

• Provides a support point within the relevant body assembly
• Assists with maintaining the intended location of adjoining panels
• Replaces damaged or weakened original bracket metal
• Supports repairs to the middle or rear body structure
• Allows the surrounding assembly to be restored to the original arrangement

Technical Details

• Porsche part number: 91150182300GRV / 91150182400GRV
• Catalogue description: bracket, support
• Finish: primed
• Body style identified in applicable interior panelling diagrams: Coupe
• Quantity specified in each listed exploded-diagram application: 1

Symptoms of Fault

• Corrosion, perforation or flaking metal around the bracket
• Cracks or weakness close to welded joints
• Deformation following impact damage or incorrect lifting
• Misalignment of connected bodywork or interior panels
• Deteriorated patch repairs from earlier restoration work
• Damage uncovered while repairing the sills, wheel housing or rear frame

Why Replacement Matters

Renewing a deteriorated support bracket enables rusted, distorted or previously repaired material to be removed and replaced with a correctly positioned component. Before installation, inspect the adjoining panels, seams and attachment areas for hidden corrosion. Trial fitting and careful alignment are recommended before the bracket is permanently secured, as its position may affect the fit of neighbouring body and interior components.

Check fitment for your specific vehicle (model, year, engine) before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150182

The product you are viewing cross references to these numbers

Targa B-pillar cross sover, outer, black powder coating, with side louvres
Made from Steel.

Fits:
Porsche 911 Targa 2.7L-3.3L 08/73-07/89

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156504348

The product you are viewing cross references to these numbers

Targa rollover bar bottom filler plate.

Fits:
Porsche 911 1965-89 Targa

This part replaces old numbers: 90150120340, 90150120341, 90150120440, 90150120441,

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150120

The product you are viewing cross references to these numbers

Targa rollover bar bottom filler plate.

Fits:
Porsche 911 Targa - 1965 to 1989

Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150120

The product you are viewing cross references to these numbers

Elevate your Porsche 911 with UK-made Singer-style through-glass mirrors - for a bold, retro-inspired look.  

Fits (Coupe, Cabriolet & Targa Body Styles):
Porsche 911 1965-89
Porsche 911 (930) Turbo 1975-89 

Porsche 912 1966-69

Porsche 964 Carrera 1989-94
Porsche 964 Turbo 1991-94

Porsche 993 Carrera 1994-98
Porsche 993 Turbo 1995-98

NOTE: These mirrors are not compatible with certain early Porsche 911 models fitted with opening quarter-light windows.   

Product Details: 

These 95mm round convex through-glass mirrors provide excellent rear-view visibility and are fully adjustable from inside the car. Supplied with pre-drilled quarter light windows, they are available for air-cooled Coupe, Cabriolet or Targa models (please specify below), finished in either nickel or satin black, sold as a pair, and 100% made in the UK. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SC11

The product you are viewing cross references to these numbers

Torsion Bar Cover Gasket - fits Left or Right Hand Side
Sold each - 2 required per car

Maintain the integrity and protection of your classic Porsche suspension system with this OE Match Torsion Bar Cover Gasket. Designed for Porsche 911 models from 1965 to 1986 fitted with the 915 gearbox, this gasket sits between the torsion bar cover and the vehicle body, helping to create a protective seal around the torsion bar access area.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Diagram ref no 34

Although small and often overlooked, the torsion bar cover gasket plays an important role in preventing moisture, dirt, road debris and contaminants from entering the torsion bar housing area. By helping to seal the cover correctly, it contributes to the long-term preservation of the suspension components and surrounding body structure.

Ideal for restoration projects, suspension overhauls and routine maintenance, replacing the gasket whenever the torsion bar cover is removed helps maintain factory levels of protection and fitment.

What Does a Torsion Bar Cover Gasket Do?

The torsion bar cover gasket creates a sealing barrier between the torsion bar cover and the body shell.

Its primary functions include:

• Helping prevent moisture ingress
• Reducing dirt and debris contamination
• Protecting torsion bar components
• Supporting corrosion prevention
• Improving cover fitment
• Reducing water retention around the torsion tube area
• Maintaining factory sealing standards

The gasket helps ensure the torsion bar access area remains protected from environmental exposure.

Why Do Torsion Bar Cover Gaskets Fail?

Over time, rubber, cork or gasket materials naturally deteriorate due to age and environmental conditions.

Common causes of failure include:

• Age-related hardening
• Compression over time
• Moisture exposure
• Heat cycling
• Damage during removal
• Corrosion around mounting surfaces
• Long-term environmental exposure
• Restoration work requiring removal

Once compressed or damaged, the gasket can lose its ability to seal effectively.

When Should the Gasket Be Replaced?

The gasket should always be inspected whenever the torsion bar cover is removed.

Replacement is recommended when:

• Performing suspension repairs
• Replacing torsion bars
• Carrying out restoration work
• The gasket shows signs of cracking
• The gasket becomes compressed or flattened
• Water ingress is visible
• Corrosion is present around the cover
• The original gasket is missing

Many Porsche specialists automatically replace these gaskets during suspension refurbishment projects.

Why Replacement Matters

A worn or damaged gasket can allow moisture and contaminants to enter the torsion bar housing area.

Benefits of replacement include:

• Improved sealing performance
• Better protection against moisture
• Reduced corrosion risk
• Protection of suspension components
• Improved restoration quality
• Correct cover fitment Long-term durability
• Restoration of factory standards

Replacing the gasket is a simple and cost-effective way to help preserve the rear suspension structure of your classic Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150475901

The product you are viewing cross references to these numbers

Torsion Bar Cover Gasket.
Fits left or right side

Fits:
Porsche 911 1986 - 1989 Carrera
Porsche 930 1986 -1898
Cars with 950 Gearbox

Click 'Zoom in' for large parts diagram.
Diagram ref no 22.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155951100

The product you are viewing cross references to these numbers

Torsion Bar Cover with Gasket - fits Left or Right Hand Side
Sold each - 2 required per car

Restore factory appearance and protect key rear suspension areas with this OE Match Torsion Bar Cover for Porsche 911 models from 1965 to 1986 fitted with the 915 gearbox. This cover is fitted around the torsion bar access area and helps protect the torsion bar tube and surrounding bodywork from dirt, moisture, road debris and corrosion.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L

Diagram ref no 28

The torsion bar system is a vital part of the classic Porsche 911 rear suspension design. The cover helps close and protect the access point used for torsion bar servicing and adjustment, preserving both the structure and appearance of the vehicle.

Over time, original covers can corrode, become damaged, distort or go missing during previous repairs. Replacing worn or damaged covers helps improve protection, restoration quality and long-term durability.

What Does a Torsion Bar Cover Do?

The torsion bar cover protects the torsion bar access area and surrounding rear suspension structure.

Its main functions include:

• Protecting the torsion bar access point
• Helping shield suspension components from road debris
• Reducing dirt and moisture exposure
• Supporting factory-correct body appearance
• Helping prevent corrosion around the torsion tube area
• Providing access for torsion bar servicing when removed

Why Do Torsion Bar Covers Fail?

Torsion bar covers are exposed to road spray, moisture, dirt and age-related corrosion.

Common causes of failure include:

• Rust and corrosion
• Stone impact damage
• Poor previous repairs
• Distortion during removal
• Missing or seized fixing hardware
• Long-term exposure to road salt and moisture
• General age-related deterioration

When Should It Be Replaced?

Replacement is recommended when the cover is damaged, corroded or missing.

Common signs include:

• Visible rust
• Damaged or distorted cover
• Missing cover plate
• Poor fitment
• Corrosion around fixing points
• Restoration or repainting work
• Rear suspension or torsion bar servicing

Why Replacement Matters

A damaged or missing torsion bar cover can leave the suspension access area exposed to moisture and debris.

Benefits of replacement include:

• Restores factory appearance
• Helps protect rear suspension areas
• Reduces corrosion risk
• Improves restoration quality
• Supports long-term body protection
• Ideal during torsion bar or suspension servicing       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150407900

The product you are viewing cross references to these numbers

Torsion bar cover.
The 93050475401GRV (rear right) and 93050475301GRV (rear left) are genuine Porsche primed body cover panels designed for the 911 G-Series. Supplied in primer for custom paint finishing, these panels form part of the exterior rear bodywork and are essential for restoring or maintaining the wide-body Turbo-Look styling, ensuring both factory-correct fitment and lasting durability.

Fits:
Porsche 911 1984 - 1989 WIDEBODY
Porsche 930 1984 - 1989 WIDEBODY

Diagram ref no 28

These rear body cover panels, also known as strut-plate or outer rear panels, are located around the rear suspension and inside the wheel arch area. They not only enhance the car’s appearance but also play a protective role by shielding wiring, suspension, and other components from debris and moisture. In addition, they support aerodynamics and contribute to the overall structure and finish of the Porsche 911.

You may need to replace these covers if:
•  The original panels are damaged, corroded, dented or warped.
•  The car is being restored or you’re doing a cosmetic overhaul, especially if adding or already have the Turbo-look styling.
•  Paint damage or rust around edges making repair difficult or expensive.
•  When replacing, ensure fitment side (left vs right), correct part code (GRV), and check they match your car’s configuration (turbo look vs standard).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050475

The product you are viewing cross references to these numbers

Torsion tube end cap (Bushing retainer).
* Can be utilized on later cars by using early bushings.

Fits:
Porsche 356 1957-65
Porsche 911/912 1965-68

Depth of cup:
0.85"- 1.25" for 1965-69 models
1.35" for 1970+ models

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PP280TC

The product you are viewing cross references to these numbers

Torsion tube repair panel rear side member.

Fits:
Porsche 911 / 912 - 1965  to 1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (front section of it)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150101

The product you are viewing cross references to these numbers

Rear vented tunnel cover by OE Match. This interior replacement incorporates ventilation slots.

Fits

• Porsche 911 & 912 (1965-1989)=>911 1965-1968 2.0L / 912 SWB (F) with Webasto Heater
• Porsche 911 & 912 (1965-1989)=>911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F) with Webasto Heater
  
  

The Webasto-heater requirement applies when checking these application groups. Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram ref no 12

What This Product Does

The cover fits at the rear of the cabin tunnel, providing a slotted closure for the specified heater-equipped application. It is intended for replacing a missing or damaged cover during interior repair or restoration, rather than replacing the heater itself.

Functions

• Covers the rear interior tunnel opening.
• Provides ventilation through its slots.
• Reinstates the corresponding cabin fitting during restoration.
  
  

Technical Details

• Product reference: 90150407531.
• Brand: OE Match.
• Position: rear interior tunnel.
• Design: vented cover with air slots.
• Specified equipment: Webasto heater.
  
  

Symptoms of Fault

• Visible damage or distortion affecting the cover's fit.
• Loose seating or rattling around the cover.
• A missing cover or evidence of an unsuitable previous replacement.
  
  

Why Replacement Matters

Renewing a damaged or missing cover helps complete the tunnel's interior fittings while retaining the specified vented arrangement. Check the surrounding mounting area and existing fixings before installation; replacing the cover alone will not correct damage to its supporting attachment points.

FAQs

• Is this intended for every early 911?
  No. The supplied application specifies 1965–1973 cars equipped with a Webasto heater.
• Which part of the interior does it cover?
  It is the vented cover for the rear tunnel area inside the cabin.
• What should I check before fitting?
  Confirm the vehicle year, heater equipment and product reference, then compare the cover with the original fitting.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150407531

The product you are viewing cross references to these numbers

Windscreen Frame & Roof.

Fit:
Porsche 911 1965-89 COUPE without Sunroof

Click 'Zoom in' for large parts diagram.
Diagram ref no 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150308712GRV

The product you are viewing cross references to these numbers

Windscreen Frame & Roof (With Sunroof cut out)

Fit:
Porsche 911 1965-89 COUPE with Sunroof

Click 'Zoom in' for large parts diagram.
Diagram ref no 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150308713GRV

The product you are viewing cross references to these numbers

Windscreen frame.

Fit:
Porsche 911 Coupe 2.0L-3.3L 01/1963-07/1989

Fits 911 F model from 1964-73. 
Will also fit 911 G model from 1974-1989 but with modifications to holes for washer nozzles

Click 'Zoom in' for large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150398701GRV

The product you are viewing cross references to these numbers

Windscreen Frame.

Fit:
Porsche 911 1965-89 COUPE

Click 'Zoom in' for large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150398701GRV

The product you are viewing cross references to these numbers