Indicators Rear RHD

Rear Indicator Lenses - E-Mark Approved

Restore the appearance, safety and originality of your classic Porsche with Rear Indicator Lenses, designed specifically for Porsche 911 Short Wheel Base (SWB) models produced between 1965 and 1968. These E-Mark approved rear indicator lenses are supplied without decorative trim rims and provide an ideal replacement solution for worn, damaged or ageing original lenses.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)

The rear indicator lenses play a crucial role in ensuring that your vehicle's directional signals remain clearly visible to following traffic. In addition to their important safety function, the rear lamp lenses contribute significantly to the overall appearance of the vehicle and are often a key detail during restoration projects.

Over time, original lenses can become faded, cracked, scratched or discoloured, reducing light transmission and affecting both visibility and presentation. Replacing them helps restore correct lighting performance while preserving the authentic appearance of your early Porsche 911.

What Do Rear Indicator Lenses Do?

Rear indicator lenses cover and protect the indicator bulb and lamp assembly while allowing the flashing signal to remain highly visible to other road users.

A properly functioning rear indicator lens helps provide:

• Clear directional signalling
• Improved visibility for following traffic
• Protection of bulbs and lamp housings
• Effective light transmission
• Resistance to dirt and moisture ingress
• Compliance with road safety regulations
• Original factory-style appearance

The E-Mark approval confirms that the lenses meet recognised European road-use standards.

Symptoms of Wear or Failure

Rear indicator lenses are exposed to years of sunlight, weather conditions, vibration and road debris.

Common signs that replacement is required include:

• Cracked or chipped lenses
• Faded or discoloured plastic
• Cloudy or scratched lens surfaces
• Reduced indicator brightness
• Moisture or condensation inside the lamp
• Damaged fixing points
• Poor lens fitment
• Deteriorated rear-end appearance

Worn or damaged lenses can reduce signalling effectiveness and compromise both safety and vehicle presentation.

Why Replacement Matters

Replacing worn rear indicator lenses helps restore safe signalling performance and protects the internal lamp assembly from environmental damage.

Benefits include:

• Improved indicator visibility
• Enhanced road safety
• Better light transmission
• Protection against moisture ingress
• Improved rear-end appearance
• Preservation of factory-correct styling
• Enhanced restoration quality
• Protection of internal lighting components

For Porsche 911 SWB owners, replacing ageing rear lenses is a simple yet highly effective way to improve both functionality and originality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163192

The product you are viewing cross references to these numbers

Indicator lens screw washer. Rubber / Neoprene

Fits:
Porsche 911 1969-89

PRICE IS EACH

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163100020

The product you are viewing cross references to these numbers

Indicator lens screw.

Fits:
Porsche 911 1969-89

PRICE IS EACH

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163100010

The product you are viewing cross references to these numbers

Indicator lens seal rear.

Fits:
Porsche 911/912 >>1968

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163141

The product you are viewing cross references to these numbers

Rear Indicator Lens Seal

Restore proper rear light sealing with Rear Indicator Lens Seal, designed for Porsche 911 models from 1969 to 1989. This seal fits between the rear indicator lens and lamp housing, helping prevent water, dirt and road debris from entering the rear lighting assembly.

Fits:

• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Although small, the rear indicator lens seal is essential for protecting bulbs, wiring, reflectors and lamp housings from moisture damage. Over time, original seals can harden, crack, shrink or flatten, allowing condensation and water ingress that may lead to corrosion and electrical faults.

Replacing worn rear indicator seals helps maintain reliable lighting performance, improves weather protection and supports a clean, factory-correct restoration.

What Does a Rear Indicator Lens Seal Do?

A rear indicator lens seal creates a protective gasket between the lens and rear lamp housing.

It helps provide:

Protection against water ingress Reduced risk of condensation Protection for bulbs and wiring Improved lamp housing durability Better rear light fitment Factory-style sealing and appearance

Symptoms of Wear or Failure

Common signs that the seal needs replacing include:

• Water inside the rear light unit
• Condensation behind the lens
• Cracked or perished rubber
• Flattened or hardened seal material
• Corroded bulb holders or contacts
• Poor lens fitment
• Dirt or debris inside the lamp housing
• Electrical issues caused by moisture

Why Replacement Matters

Replacing worn rear indicator lens seals helps protect the rear lighting system and prevents avoidable damage.

Benefits include:

• Prevents moisture entering the lamp
• Helps avoid corrosion and electrical faults
• Protects rear light components
• Restores proper lens sealing
• Improves restoration quality
• Maintains classic Porsche originality
• Supports reliable indicator operation

Features & Benefits

• Suitable for Porsche 911 models from 1969-1989
• Rear indicator lens seal application
• Helps prevent water and dirt ingress
• Protects bulbs, wiring and lamp housings
• Ideal for restoration, repair and maintenance
• Direct replacement for aged or damaged seals

Why Replace Porsche Rear Light Seals?

Benefits include:

• Improved weather protection
• Reduced condensation
• Better lamp fitment
• Protection from corrosion
• Improved electrical reliability
• Enhanced restoration accuracy
• Preservation of classic Porsche lighting components       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9116319710

The product you are viewing cross references to these numbers

Gasket for right rear light.

Fits:
Porsche 911 /Carrera (1969 to 1989)
Porsche 911 Turbo (1975 to 1989)
Porsche 959

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9116319710

The product you are viewing cross references to these numbers

Indicator lens seal, Rear.

Fits:
Porsche 911/912 >>1968

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163141

The product you are viewing cross references to these numbers

Indicator unit with lens rear for Early Porsche 911 1965-68 Short Wheel Base Cars



Fits:
Porsche 911 1965-68 SWB
Porsche 912 1965-68 SWB

Rear Indicator unit the housing is made of plastic so it will not corrode, Retro Line after- market product. Complete with bulb holders, bulbs, wires and gasket

Replacement for original Porsche part numbers 90163140300, 90163140400 which are no longer available

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163140

The product you are viewing cross references to these numbers

Rear Indicator metal unit housing and rear lens with black rim. ORIGINAL PORSCHE made by Bosch. Complete with rubber gasket.



Fits:
Porsche 911 1986-89
Strictly speaking these are for Porsche 911 1986-89 as the connection plug is different to the early 911's , but you can cut the plug and use them !
*Can also be used for Porsche 911 1970-85

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163140

The product you are viewing cross references to these numbers

Rear Indicator METAL unit housing after market product. Complete with wiring & rubber gasket



Fits:
Porsche 911 1969-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9116319

The product you are viewing cross references to these numbers

Rear indicator PLASTIC unit housing after market product. Complete with wiring & rubber gasket.

This Left (OE ref no 91163193900) and Right (OE ref no 91163194000) Rear Indicator Unit Housings are replacement signal lamp housings manufactured to closely match the original units used on Porsche 911 models from 1970 through 1989. These housings are the structural assemblies that mount and hold the rear turn signal lamp and related wiring in place.

Fits:
Porsche 911 1969 - 1989


These  rear indicator unit housings provide a direct-fit aftermarket solution that replicates the shape, mounting points, and material quality of the original Porsche rear indicator housings. Moulded from durable plastic and supplied complete with wiring and a rubber gasket, they are designed to install easily into the rear quarter panel without modification. Ideal for restoration or maintenance of classic 911 lighting assemblies, they help preserve correct signal alignment and long-lasting performance.

The rear indicator unit housing forms the rigid body that supports the rear turn signal lamp and secures it to the vehicle. It positions the lamp correctly for optimal visibility, holds the electrical connections in place, and provides a stable mount to resist vibration and shock while driving.

Installed behind the rear indicator lens and attached to the vehicle body, this housing protects the lamp and wiring from moisture and debris. It also ensures proper optical alignment so that the turn signals function correctly and are clearly visible to other drivers. The housing includes provisions for the rubber sealing gasket to maintain a weather-tight fit.

Original rear indicator housings can become brittle, cracked, or damaged due to age, heat cycling, and road conditions. A compromised housing may allow moisture ingress or poor wiring contact, leading to unreliable signal operation or early bulb failure. Replacing worn housings restores proper fit, improves signal reliability, and helps maintain the historic correct look of the rear lighting.

When to replace:
•  Housing is cracked, broken, or warped
•  Rear turn signal is intermittent or not working
•  Signs of moisture or corrosion in the housing
•  Indicator assembly removed during bodywork or restoration
•  Routine maintenance on classic lighting systems

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9116319

The product you are viewing cross references to these numbers

Rear Indicator metal unit housing original Porsche made by Bosch. Complete with rubber gasket.



OE Part No Ref. LEFT 91163193900
OE Part No Ref. RIGHT 91163194000

Fits:
Porsche 911 1969-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9116319

The product you are viewing cross references to these numbers

LED rear tail lamp housing set Porsche 911 1969-1989



Fits all Porsche 911 models from 1965-1989
Lamp lenses are not included

Pair of Euro style Porsche 911 rear lamp housings 3D printed from durable ABS plastic

These lamps saves weight and improves illumination on early 1969 to 1989 911s

The 911R used a fiberglass taillight base plate with Euro lights mounted to them to reduce the weight of the vehicle. Many people don't like the look but want the weight savings, along with improved lighting

These lamps weigh only 363g with bulbs where the 911R units are approx. 550g

The lamps use 3157 LED bulbs (amber, red and bright white )and include the twist lock bulb sockets

These lamps are like the Euro / Rest of World units and do not have the US "marker lamps"

Lamps bolt in place and fit like factory with new hardware. Use OEM lenses and OEM gaskets but can also be fitted without gaskets as LEDs are mostly waterproof and don't get hot

If you are fitting a new gasket, you may need to trim the gasket in some areas (usually behind the front corner) for a nice fit. The new gaskets, especially aftermarket can be quite a bit thicker. Take your time for best result

The new gaskets must be glued on carefully as some of the gaskets are thicker than the originals. This can push the lens out a bit in the corners. Carefully trim the gasket to get the desired fit

Please note, lamps require careful installation as some minor modifications may be required.

The housings are designed and tested on early 911s but may require some slight adjustment to get just right

Installation instructions:

With green/red/black brake lamp socket
https://docs.google.com/document/d/e/2PACX-1vThwxzzZpxd78WjTQayoBqqS3cX7OhfUb9CUlOxQZznaIvJkOqC-WodnHif2VywJJ4rPdJJBaMy8IXb/pub

With blue/red/black brake lamp socket
https://docs.google.com/document/d/e/2PACX-1vQKptSNnncXadtUoWSexrUYi0AzXmvQm6M_XYuJIZEXHhtOtw9-LIPhAmR7WGmHK3qRZilZ3QLPdVHx/pub

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163140-

The product you are viewing cross references to these numbers

911 G-Model Modern Style Tail lights including rear center lens.

Fits:
Porsche 911 G-model 1974 - 1989

These modern tail lights perform as good as they look. Designed to a very high spec, the lenses are milled from solid blocks of acrylic for longevity/precision before meticulously finished for perfect fitment. Lights are mounted from the backside for clean look. Modern bulb holders have to be connected to the original car side wiring loom.

Set includes all lenses with lettering options available for the center lens.
Lenses available in red or grey.

NOTE: This product is not DOT certified and has no e-markings, and is therefore only for track or display use.

Please note: This part is on special order terms. Delivery time is normally 5-6 weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911631

The product you are viewing cross references to these numbers

F/G-Model Modern Style Tail Lights, Orange with red insert for brakes.

Fits:
Porsche 911 F-Model 1965 - 1973
Porsche 911 G-Model 1974 - 1989

These modern tail lights perform as good as they look. Designed to very high spec, the lenses are milled from solid blocks of acrylic for longevity/precision before meticulously finished for a perfect fitment. Lights are mounted from the backside for clean look. Modern bulb holders have to be connected to the original car side wiring loom.

Set includes all lenses.
Lenses available in orange.

NOTE: This product is not DOT certified and has no e-markings, and is therefore only for track or display use.

Please note: This part is on special order terms. Delivery time is normally 5-6 weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911631ORG

The product you are viewing cross references to these numbers

Protective cap rear lamp wiring. 



Fits:
Porsche 911 3.2 Carrera - 1987 to 1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163126100

The product you are viewing cross references to these numbers