Track Rods

Track rod end.



Fits:
Porsche 914 (1970 - 1976)
Porsche 914/6 (1970 - 1972)
Porsche 911 F (1965 - 1973) (also for 912)
Porsche 911 G (1974 - 1983)
Porsche 911 Turbo (1975 - 1989)
Porsche 911 Carrera (1984 - 1989)
Porsche 959 (1987 - 1988)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134732204

The product you are viewing cross references to these numbers

Track Rod End.
The OE Match Track Rod End is a high-quality replacement steering component designed to connect the steering rack and track rod assembly to the steering knuckle. This critical suspension and steering part allows steering input to be transferred accurately to the front wheels while accommodating suspension movement and road surface changes.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 914 (1970-1976)  

Manufactured to OE specifications for fit, strength and durability, the track rod end features a precision ball joint assembly designed to provide smooth steering operation, accurate wheel control and long service life. It is an essential replacement component for maintaining steering precision, vehicle stability and safe handling characteristics.  

What This Product Does:

• Connects the steering rack and track rod to the steering knuckle.
• Transfers steering input from the steering system to the wheels.
• Allows controlled articulation as the suspension moves.
• Maintains accurate wheel alignment and steering geometry.
• Supports stable handling and responsive steering performance.
• Helps ensure safe vehicle control under all driving conditions.

Symptoms Of Wear Or Failure:

• Excessive play or looseness in the steering.
• Knocking or clunking noises from the front suspension.
• Vibration felt through the steering wheel.
• Uneven or accelerated tyre wear.
• Vehicle wandering or pulling while driving.
• Reduced steering precision and responsiveness.
• Poor wheel alignment.
• Visible damage or deterioration of the dust boot.
• Excessive movement in the ball joint during inspection.

Why Replacement Matters:

• Track rod ends are subjected to constant steering movement, road impacts, vibration, moisture and contamination. Over time, the internal ball joint can wear, while protective dust boots may crack or split, allowing dirt and water to enter the joint.
• A worn track rod end can significantly affect steering accuracy, wheel alignment and vehicle handling. If left unresolved, excessive play can increase tyre wear, compromise vehicle stability and create a serious safety risk. In extreme cases, complete joint failure can result in a loss of steering control.
• Replacing a worn track rod end restores precise steering response, maintains correct alignment and helps ensure safe and predictable vehicle handling. An OE Match replacement provides factory-style fitment, reliable performance and long-term durability, making it an essential component for suspension and steering system maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134732204

The product you are viewing cross references to these numbers

Track rod end.



Fits:
Porsche 911 TURBO (930) 3.0L/3.3L 1975-89

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Please note the image may be different to the actual item.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034732200

The product you are viewing cross references to these numbers

Track rod end.



Fits:
Porsche 911 TURBO (930) 3.0L/3.3L 1975-89

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Please note the image may be different to the actual item.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034732200

The product you are viewing cross references to these numbers

Track Rod Inner Joint Spacer.

The OE Match Track Rod Inner Joint Spacer is a precision-engineered replacement steering component designed to provide correct spacing and alignment within the track rod and steering assembly. This small but essential part helps ensure proper positioning of the inner track rod joint, maintaining accurate steering geometry and supporting the smooth operation of the steering system.
Sold Each.
x2 Required Per Car.

Fits:

• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Diagram Ref No 13B  

Manufactured to OE specifications for fit, accuracy and durability, the spacer is designed to withstand the loads, vibration and stresses encountered during normal driving. It is an important component during steering system repairs, track rod replacement and suspension restoration work.  

What This Product Does:

• Maintains correct spacing within the track rod assembly.
• Ensures proper positioning of the inner steering joint.
• Helps preserve accurate steering geometry.
• Supports smooth and precise steering operation.
• Assists in maintaining correct wheel alignment settings.
• Contributes to the reliability and integrity of the steering system.

Symptoms Of Wear Or Failure:

• Excessive play within the steering assembly.
• Reduced steering precision.
• Difficulty achieving correct wheel alignment.
• Uneven tyre wear.Steering wheel vibration or instability.
• Knocking or movement within the steering linkage.
• Premature wear of steering components.
• Inconsistent steering feel during driving.

Why Replacement Matters:

• Although often overlooked, steering spacers play an important role in maintaining the correct geometry and positioning of steering system components. Over time, corrosion, wear, damage during servicing or incorrect installation can affect the spacer's ability to perform its intended function.
• A worn, damaged or missing spacer can contribute to steering misalignment, increased component wear and reduced steering accuracy. If steering geometry is compromised, handling performance, tyre wear and overall vehicle stability may be negatively affected.
• Replacing a worn or damaged track rod inner joint spacer helps restore correct steering assembly alignment, supports accurate wheel geometry and ensures the steering system continues to operate safely and effectively. An OE Match replacement provides factory-style fitment and dependable long-term performance for your Porsche steering system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034731301

The product you are viewing cross references to these numbers

Track rod inner joint / Tie rod joint bushing.
This joint bushing (91434705700 / 91434705701 / 91434705702) is a precision-engineered replacement for the original joint bushing used in Porsche 911 and 914 steering systems. It connects the steering rack to the outer tie rod, providing smooth and accurate steering articulation while maintaining factory geometry and wheel alignment.
Sold each, 2 required.

Fits:
Porsche 911 1965 - 1989 (Not Turbo)
Porsche 914 1970 - 1976

Diagram Ref No 3.

•  Location: Inner joint between the steering rack and the tie rod 
•  Function: Transmits steering movement from the rack to the tie rods, ensuring accurate front-wheel response
•  Installation: Direct replacement – fits original rack and tie rod assembly

Over time, the inner tie rod joints or bushings can wear, causing steering play, vibration, or alignment drift.
Replace when you notice:
•  Steering looseness or rattling
•  Uneven tire wear Vibration or “wandering” at speed

•  Excessive movement when inspecting inner tie rod ends

Installing new inner joints restores tight steering precision, proper tracking, and the responsive handling feel expected from a Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434705702

The product you are viewing cross references to these numbers

Track rod inner joint.
The genuine Porsche part number 91434705702 Inner Tie Rod Joint / Bush is the factory-specified component that threads into the steering rack and connects to the outer tie rod in classic Porsche 911, 912, and 914 models. As a precision OEM part, it maintains exact geometry and alignment to ensure reliable and accurate steering response.
Sold each, two units are required per vehicle.

Fits:
Porsche 911 1965 - 1989 (Not Turbo)
Porsche 914 1970 - 1976

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Diagram Ref No 3.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434705702

The product you are viewing cross references to these numbers

Track rod.



Fits:
Porsche 911/S/TU/L and 912 (1965 to 1969)
Porsche 911 (1970 to 1977)
Porsche 911 SC (1978 to 1983)
Porsche Carrera (1984 to 1989)
Porsche 914 (1970 to 1976)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134703102

The product you are viewing cross references to these numbers

Track rod.



Fits:
Porsche 911 1965-89 Left or Right side
Not Turbo models.
Porsche 914 Left or Right side

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134703102

The product you are viewing cross references to these numbers

Track rod. Price is for each.



Fits:
Porsche 911 TURBO (930) 3.0/3.3L 1975-89
Porsche 914

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13/1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Track rod. Price is for each.



Fits:
Porsche 911 TURBO (930) 3.0/3.3L 1975-89
Porsche 914

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13/1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Track rod
This OE Match track rod assembly is a direct replacement for the original Porsche steering component fitted to Porsche 911 Turbo (930) 3.0L and 3.3L models. The track rod transfers steering input from the steering rack to the front wheels while allowing suspension articulation. It helps maintain accurate steering response, stable handling, and correct front wheel alignment. Fits left or right side. Direct replacement with factory-style fitment.
Sold individually, 2 required per vehicle

Fits:
Porsche 911 TURBO (930) 3.0/3.3L 1975 - 1989
Porsche 914 1970 - 1976

Diagram ref no 13/1

Installed between the steering rack and the outer track rod end, the track rod transfers steering movement from the rack assembly to the front wheels. It forms a critical part of the steering linkage system and allows controlled articulation during steering and suspension movement while maintaining accurate wheel alignment and steering response.

Function
•  Connects steering rack to front wheel steering assembly
•  Transfers steering input directly to front wheels
•  Maintains accurate steering geometry and wheel alignment
•  Supports precise steering response and stable handling
•  Allows controlled steering and suspension articulation

Track rods are constantly subjected to steering load, suspension movement, vibration, and road impact. Over time, internal wear can create excessive steering play and reduce handling precision. A worn track rod may lead to vague steering feel, unstable handling, uneven tyre wear, or MOT failure. Replacing worn steering components restores safe and responsive steering performance.

When to replace
•  Excessive steering play or vague steering feel
•  Knocking noises from front suspension or steering
•  Uneven tyre wear or wheel alignment issues
•  Failed steering or suspension inspection
•  During steering rack refurbishment or suspension rebuild

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Turbo track rod end bump steer kit. Racing / Motorsport.
30mm lowering. Rubber boots are already in the housing – the part is already protect against dust and water so no extra boots are needed.
Sold as set, 1 set required per car.

Fits
Porsche 911/930 turbo 1978 - 1989


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034732200

The product you are viewing cross references to these numbers