Targa

Targa Top lateral / horizontal Seal, Fits over door drop glass complete with internal metal insert.
The Targa side roof seal is designed to restore proper weather sealing along the side edge of the removable Targa roof panel on classic Porsche 911 models. This precision-moulded rubber seal fits between the Targa top and the side window frame, creating a tight barrier that prevents wind, water, and road noise from entering the cabin.

Fits:
Porsche 911 1970 - 1989

Diagram ref no 45

Old Targa roof seals commonly fail due to UV exposure, compression set, and age. A damaged seal can lead to:
• Water ingress into interior trim and carpets
• Excessive wind noise or whistling
• Poor window alignment and rattles
• Reduced roof stability and overall cabin comfort.
Replacing the seal restores a tight, clean Targa-top closure and protects the interior from the elements.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115652

The product you are viewing cross references to these numbers

Tenax base stud lower part.

Fits:
Porsche 911 1965-71 TARGA

Click 'Zoom in' for large parts diagram.
Diagram ref no 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959160312

The product you are viewing cross references to these numbers

Tensioning bracket for soft targa window lock

Fits:
Porsche 911 / 912 - 1967 to 1971

Tensioning bracket is intended for the Soft Window Targa roof lock on the 'F-model' of the 911 and 912 (1967 to 1971)

Diagram ref no 55

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156581

The product you are viewing cross references to these numbers

Targa soft top locking pin, Front.

2 pieces needed per car. Sold each.
It is a good idea to replace this plate when purchasing new location pegs (91156507440)

Fits:
Porsche 911 Targa 2.0-3.3 07/66-07/89
Porsche 964 Targa 3.6 12/88-09/93

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156520340

The product you are viewing cross references to these numbers

Targa soft top locking pin, Front.
Front Targa soft top locking pin for Porsche 911 Targa models from 1966 to 1989 and Porsche 964 Targa models from 1988 to 1993. This replacement pin forms part of the front Targa roof securing mechanism and helps correctly locate and lock the removable roof panel in position. The pin is sold individually, with 2 required per vehicle. It is recommended to inspect and consider replacing these locking components when fitting new location pegs 91156507440.

Fits:
Porsche 911 Targa 2.0-3.3 07/1966 - 07/1989
Porsche 964 Targa 3.6 12/1988 - 09/1993

Diagram ref no 11

This locking pin is fitted at the front of the Targa soft top roof assembly and forms part of the mechanism used to secure the removable roof panel to the vehicle. Correctly functioning locking pins are important for proper roof positioning and secure engagement of the Targa top.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156520340

The product you are viewing cross references to these numbers

Transparent Targa Roof for Porsche 911 Targa (1967- up to Summer 1985) Carbon Version.

In the period from 1967- up to Summer 1985, Porsche produced all Targas with claw locks. Unfortunately, the claw lock or the thin sheet metal in which it engages is not permanently dimensionally stable, which means that damage can occur. We solve this problem with an adapter set that converts the claw closure of all Porsche Targa models from 1967- up to Summer 1985 to a roller closure.
This not only protects the windscreen frame from deformation and makes it easier to fit the GTS-TOP using the roller lock, but also prevents water from penetrating the tubular frame.
The GTS-Top is made of innovative and advanced materials, for example: extremely lightweight and highly robust carbon fiber (CFRP) for the frame, with Makrolon glass, hard anti-scratch coating, stainless steel fasteners with Teflon bushings and modern EPDM seals. It is 2kg lighter than the already light original one.

Specifications:
Carbon-Composite High-Tech Framework
Stainless steel roll latches and 5-pins with Teflon bushing
High-Tech nano coated Makrolon window (Antistatic and Anti-scratch coating)

Exterior:
Colour of window tint : Green

Interior:
Frame: matt-black structure paint
(Optional: Visible Carbon, Alcantara, Leather, or Painted)

Fits
Porsche 911 1967- up to Summer 1985

**Please note the bag is not included cost is £175.00 extra.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

V2CMA12

The product you are viewing cross references to these numbers

Window framework soft screen targa. 

Fits:
Porsche 911 / 912 - 1967 to 1971

Soft window targa screen framework with ancillary brackets

Section of diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156500641

The product you are viewing cross references to these numbers