Bonnets / Locks & Latches

Engine Lid Handle Grommet.
The Porsche Engine Lid Handle Grommet is a genuine OEM rubber spacer designed to secure and protect the engine lid handle on classic Porsche models. This grommet sits between the handle and the decklid panel, preventing metal-to-metal contact, reducing vibration, and ensuring a flush, factory-correct fit.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) RS 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) GT2 1994-97
• Porsche 993 (911) TURBO S 1994-97

What This Product Does:

The grommet spaces and cushions the handle / pull / grab post on the engine lid (rear deck / rear cover), ensuring that the handle is mounted securely and with the correct clearance. It also isolates the handle from metal-to-metal contact, preventing wear, chafing, vibrations, or damage to the lid surface or paint.

Symptoms & Signs It Needs Replacing:

• The engine lid handle feels loose, wobbles or moves when tugged.
  
• Misalignment: the handle may not sit flush with the lid or tilt slightly.
  
• Noise or vibration from the lid area when driving or over bumps.
  
• Wear marks or damage around the handle mounting hole where the grommet should sit.
  
• The grommet is visibly cracked, deformed, or missing altogether.

Why Replacement Matters:

• Preserves structural integrity: ensures the handle is securely anchored without damaging the lid material.
  
• Prevents damage to the lid surface or paint from metal on metal contact or rubbing.
  
• Restores proper fit & feel of the handle — no looseness, no rattles, clean alignment.
  
• Low cost preventive fix: rather than replace more expensive components later, this small grommet helps avoid long-term damage.
  
  

Diagram Ref No 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151253100

The product you are viewing cross references to these numbers

Extended hood latch.

Fits:
Porsche 911 1974 - 1989 
Porsche 964

Extended hood latch for short hoods with long hood extensions We have extended the safety hook on these latches to allow a larger gap for your hand when opening the hood. 

front bonnet, aluminum. For racing cars only
fragile alu material, total weight 5.10 kg

This is a aluminum bonnet on a aluminum frame



Fits:
Porsche 911 (2.7L-3.3L) 1973-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151101004GRV

The product you are viewing cross references to these numbers

Front Bonnet.
The OE Match Front Bonnet is a premium-quality replacement body panel designed to restore the original appearance, fit and structural integrity of the front luggage compartment on compatible classic Porsche models. Manufactured to OE specifications for dimensions, contours and mounting points, this bonnet provides an accurate factory-style replacement for damaged, corroded or accident-affected original panels.  

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)  

Manufactured from high-quality automotive-grade pressed steel, the bonnet offers exceptional strength, rigidity and long-term durability while maintaining the correct panel profile and factory body lines. Supplied in a protective grey primer finish, it is ready for final preparation and painting to match the vehicle. Precision-pressed to OE standards, it ensures excellent alignment with the wings, front latch mechanism and surrounding body panels for a professional-quality restoration.  

What This Product Does:

• Restores the original appearance of the front luggage compartment.
• Protects the luggage compartment and front body structure.
• Provides a secure mounting point for the bonnet latch and hinges.
• Maintains correct panel alignment and body gaps.
• Supports proper fitment of bonnet seals and trim components.
• Replaces damaged, corroded or accident-affected bonnet panels.
• Restores factory body styling and structural integrity.
• Forms an essential part of the vehicle's front body assembly.

Symptoms Of Wear Or Failure:

• Visible rust or corrosion.
• Dents, creases or accident damage.
• Poor bonnet alignment or uneven panel gaps.
• Difficulty opening or closing the bonnet.
• Damaged bonnet latch mounting area.
• Paint bubbling caused by corrosion beneath the surface.
• Distorted panel affecting surrounding body fitment.
• Excessive vibration while driving.
• Water entering the luggage compartment due to poor panel fit.
• Cosmetic deterioration affecting the vehicle's appearance.

Why Replacement Matters:

• The front bonnet is continually exposed to weather, road debris, vibration and accidental impact. Over time, corrosion, fatigue or collision damage can affect both its structural integrity and appearance, reducing the quality of panel fitment and potentially allowing water into the luggage compartment.
• A damaged bonnet can prevent correct latch engagement, compromise body alignment and negatively affect the appearance and value of the vehicle. Corrosion left untreated may spread into adjacent body panels, increasing restoration costs and reducing the originality of a classic Porsche.
• Replacing a worn or damaged front bonnet restores the factory appearance, structural strength and correct panel alignment of the front bodywork. The OE Match replacement provides OE-style fitment, precision-pressed steel construction and a high-quality grey primer finish, making it the ideal choice for concours restorations, accident repairs and long-term preservation of your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151101004GRV

The product you are viewing cross references to these numbers

Front bonnet. Reproduction



Fits:
Porsche 911 1974-89

Material:
Made from Metal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151101004DSK

The product you are viewing cross references to these numbers

Front bonnet hinge.

Fits:
Porsche 911 2.0-3.3 01/1963-07/1989
Porsche 964 3.3-3.6 12/1988-06/1994
Porsche 993 3.6-3.8 10/1993-09/1997

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99351103

The product you are viewing cross references to these numbers

Front Bonnet Hinge.

Fits:
Porsche 911 1970>>
Porsche 964 1989-94
Porsche 993 1994-98

Left or Right. Price is for each.
Please Select below

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99351103

The product you are viewing cross references to these numbers

Front bonnet lock plate plastic cover.



Fits:
Porsche 911 1974-89
Porsche 911 (930) 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155508500

The product you are viewing cross references to these numbers

Front bonnet lock plate plastic cover.

Fits:
Porsche 911 1974-89
Porsche 911 (930) 1975-89

Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155508500

The product you are viewing cross references to these numbers

Clamp Bonnet Release.



Fits:
Porsche 911 - 1974 to 1989
Porsche 964 - 1989 to 1994 
Porsche 993 - 1994 to 1998

Click 'Zoom in' for large parts diagram
Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151106700

The product you are viewing cross references to these numbers

Clamp Bonnet Release.



Fits:
Porsche 911 - 1974 to 1989
Porsche 964 - 1989 to 1994 
Porsche 993 - 1994 to 1998

Click 'Zoom in' for large parts diagram
Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151106700

The product you are viewing cross references to these numbers

Front Bonnet Release Cable.



Fits:
Porsche 911 1986-89
Not for Club Sport 'CS' (M637)

Click 'Zoom in' for large parts diagram
Diagram ref no 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151103700

The product you are viewing cross references to these numbers

front bonnet, aluminium. For racing cars only
fragile alu material, total weight 8.10 kg

This is a aluminium bonnet on a Steel frame.



Fits:
Porsche 911 (2.7L-3.3L) 1973-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151101003GRV

The product you are viewing cross references to these numbers

Front bonnet.



Fits:
Porsche 911 1974-89

Material:
Made from Metal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151101004GRV

The product you are viewing cross references to these numbers

Front Boot Opener With Lock Cylinder And With 2 Secondary Keys.
(Without Stipulated Lock Number)

Fits:
Porsche 911 1969>>1989
Porsche 911 (930) Turbo 1975>>1989
Porsche 914 1970>>1976

Diagram Ref No 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151190300

The product you are viewing cross references to these numbers

Front carbon fibre light pod unit.



Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994

High quality carbon fibre light pod and cover as fitted to the 911 SC RS.

The Porsche factory race department used the four lamp pod starting after 1978. Rather than installing the single light units, they determined they could save weight, increase lamp count to four, and have a unit that could be removed quickly.