Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Interior / Compartment Lamps
This set brings together four components to restore full courtesy-lamp functionality for your Porsche coupe: 2 × part 99361360200 (rubber caps for door-contact switch) and 2 × part 96461360102 (door/boot light contact switches). With this complete kit you can maintain proper interior lighting behaviour, door-ajar detection and tidy finished appearance - ideal when one side or both sides of your vehicle’s switches and covers need renewal.
SET OF 4 parts
Fits:
Porsche 911 1965 - 1989
Porsche 964 1990 - 1994
Porsche 993 1994 - 1997
Diagram ref no 27 and 28.
Kit Contents & References:
2 × 99361360200 (rubber caps)
2 × 96461360102 (contact switches)
Applications:
Ideal when the rubber cap is deteriorated, missing or allowing moisture ingress, and when the contact switch is worn, intermittent or non-functional - restoring accessory lighting reliability and clean presentation.
These small components may seem minor, but they play a crucial role in the interior lighting, door-ajar alerts and overall finish of your Porsche. A missing or worn cap can allow dust, moisture or movement to degrade the switch operation; a faulty contact switch can render interior lamps inactive, cause battery drain or fail to signal door-open warning. Replacing both switches and caps ensures full system integrity, correct operation and a clean, original look.
When and why to replace:
• The rubber cap is cracked, missing, allows light-leak or door-noise.
• The door-contact switch is intermittent, fails to light the courtesy lamp or shows corrosion.
• During door trim removal, restoration or wiring work when access is available.
• When restoring a vehicle to concours specification or trying to maintain original interior functionality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96461360102
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97

Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no. 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91163290400
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1970-89
Porsche 964 1990-94
Porsche 993 1994-97
Diagram ref no 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99361360200
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Rubber cover/cover for the door contact switch (night light or door lock switch) used in classic Porsche 911, 964, and 993 models. Protects the switch underneath from moisture, dirt, and wear while maintaining the correct appearance and fitment of the original equipment. Manufactured to Porsche specifications.
Fits:
Porsche 911 1965 - 1989
Porsche 964 1990 - 1994
Porsche 993 1994 - 1997
Diagram ref no 10
• Position on Vehicle: Mounted over the door-contact switch (courtesy-lamp switch) at the door frame or body edge, covering the exposed switch mechanism.
• Applications: Ideal when the original rubber cap has cracked, gone missing, faded or is no longer sealing the switch properly - preserving correct function of door-open lamp circuit and maintaining clean appearance.
Although small, this rubber cap plays a key role in protecting the door-contact switch from moisture and contaminants, which ensures the courtesy-lamp, door-ajar indicator and electrical circuit remain reliable. A degraded or missing cap can allow water ingress, leading to corrosion of the switch, erratic lamp behaviour or eventual failure. Installing a correct replacement ensures dust-free operation, preserves your wiring and maintains the exact fit and finish Porsche intended.
When and why to replace:
• The rubber cap is cracked, swollen, melted, missing or no longer seals the switch properly.
• You notice malfunctioning door-ajar lights, erratic courtesy-lamp behaviour or corrosion at the switch.
• During door trim removal or restoration when access is already provided.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99361360200
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Porsche Interior & Compartment Lamps | Precision Lighting for Every Detail
Interior and compartment lamps illuminate your Porsche’s cabin, footwells, storage areas, and luggage compartments — providing both practicality and luxury. These lights enhance visibility inside the vehicle at night while contributing to Porsche’s refined interior ambience. Over time, however, bulbs and fittings can fade, fail, or lose clarity, diminishing both function and style.
At Design911, we supply a complete range of premium interior and compartment lighting components, including LED upgrades, courtesy lights, glovebox lamps, and luggage bay illumination. Each product is engineered for precision fitment, durability, and superior brightness — offering a perfect balance between performance and design.
Whether you’re restoring a classic Porsche or upgrading a modern model, our lighting range ensures your interior remains as refined and functional as when it left Stuttgart’s production line.
What Do Interior & Compartment Lamps Do?
Interior and compartment lighting systems improve both convenience and cabin atmosphere, enhancing your driving experience day and night.
Core Functions:
Illuminate
the cabin, footwell, glovebox, and luggage compartments.
Enhance
passenger comfort and vehicle usability in low light.
Add
a touch of refinement to Porsche interiors.
Improve
visibility for switches, storage, and controls.
Maintain
the car’s luxury and ergonomic standards.
Proper lighting ensures both comfort and usability — key to the Porsche driving experience.
Why Do Interior & Compartment Lamps Fail or Degrade?
Despite their simplicity, interior lights experience wear and degradation due to constant use and environmental factors.
Common Causes of Failure Include:
- Burnt-out bulbs or failed LED modules.
- Dimming or flickering from voltage fluctuations.
- Cracked or discoloured lenses from heat or UV exposure.
- Corroded connectors or moisture ingress.
- Faulty switches or sensor issues affecting operation.
When compartment lamps or cabin lights fail, it not only reduces interior visibility but also detracts from the car’s overall luxury and usability.
Why Replace or Upgrade Your Porsche Interior Lighting?
Replacing or upgrading your Porsche’s interior and compartment lamps restores full brightness, comfort, and design appeal. LED upgrades can also improve efficiency, longevity, and light clarity.
Key Benefits:
- Restores illumination to cabin, luggage, and storage areas.
- Enhances luxury feel with crisp, modern lighting.
- Reduces power consumption with efficient LED technology.
- Direct-fit designs for Porsche 911, Boxster, Cayman, Panamera, Macan, Cayenne and other models.
- Perfect for restorations, upgrades, or routine maintenance.
- Improves visibility and convenience inside the vehicle.
Design911’s Porsche interior lighting components deliver lasting performance, contemporary aesthetics, and premium craftsmanship.
Highlights
- High-quality Porsche interior and compartment lighting solutions.
- Includes LED, halogen, and complete lamp assemblies.
- Designed for footwell, glovebox, luggage, and courtesy lighting.
- Long-life, energy-efficient, and heat-resistant designs.
- Direct-fit for modern and classic Porsche models.
- Ideal for restorations, interior upgrades, and replacements.