Rear Section

Jack Receiver Bracket.

The OE MATCH Jack Receiver Bracket is a structural body component designed to provide a secure mounting and support point for the vehicle’s factory jack. Installed within the vehicle’s sill or chassis structure, the jack receiver bracket allows the correct positioning of the lifting equipment during maintenance, wheel changes, and workshop servicing procedures.

Fits:

• Porsche 911 1966-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Diagram Ref No 9

Manufactured to OE specifications, this bracket is engineered to match the fit, strength, and functionality of the original Porsche component. Constructed from durable steel, it is designed to withstand the loads imposed during vehicle lifting while maintaining structural integrity and safe operation.

What This Product Does:

• Provides a secure mounting point for the vehicle jack
• Supports safe lifting of the vehicle during maintenance
• Helps ensure correct jack positioning and alignment
• Transfers lifting loads into the vehicle structure
• Maintains factory lifting point functionality
• Supports safe servicing, tyre changes, and workshop procedures

Symptoms Of Wear Or Failure:

• Visible corrosion or rust damage
• Bent, cracked, or deformed bracket structure
• Difficulty locating or engaging the vehicle jack
• Loose or weakened mounting points
• Signs of previous impact or lifting damage
• Reduced structural strength around the lifting point
• Misalignment preventing correct jack fitment

Why Replacement Matters:

• Restores the factory jack mounting location
• Ensures safe and stable vehicle lifting
• Reduces the risk of damage during servicing or tyre changes
• Maintains proper load distribution into the vehicle structure
• Prevents further deterioration caused by corrosion or damage
• Supports restoration and chassis repair projects
• Preserves vehicle safety and workshop serviceability
• Maintains OEM fitment and lifting point functionality

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150115122GRV

The product you are viewing cross references to these numbers

Jack receiver socket.



Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150119500

The product you are viewing cross references to these numbers

Jack receiver socket. Porsche 911 1974-89



Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150119500

The product you are viewing cross references to these numbers

Kidney bowl
To be welded to the wheel house

Fits:
Porsche 911 - 1974 to 1986

Kidney bowl with the correct closing

Diagram ref no 26

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150114

The product you are viewing cross references to these numbers

Kidney panel gusset plate.



Fits:
Porsche 911 1985-89 TARGA / CABRIO
Porsche 911 1985-89 COUPE

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150707

The product you are viewing cross references to these numbers

Lower fender plate. Left or right side.



Fits:
Porsche 930 Turbo 3.0L / 3.3L 1975-89

Porsche 911  Widebody / Supersport

Click 'Zoom in' for large parts diagram.
Diagram ref no 27.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050306

The product you are viewing cross references to these numbers

Mounting for rear bumper. Primed.



Fits:
Porsche 911 2.7L-3.3L 1978-1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150116

The product you are viewing cross references to these numbers

Mounting for rear bumper. Primed.



Fits:
Porsche 911 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150116

The product you are viewing cross references to these numbers

Parcel shelf / heel panel interior bracket.



Fits:
Porsche 911 1965-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150308140

The product you are viewing cross references to these numbers

Parcel shelf bracket repair section under window.
Fitting Position: Vehicle Rear Windscreen



Fits:
Porsche 911 2.7L-3.3L 08/73-07/89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150308152

The product you are viewing cross references to these numbers

Parcel Shelf Repair Panel – Long Wheel Base (LWB) 

Restore the structural integrity of your classic Porsche with this Parcel Shelf Repair Panel.. Suitable for Long Wheel Base (LWB) Porsche 911 models built from August 1971 to July 1989, this repair panel has been designed to accurately replace corroded or damaged sections of the rear parcel shelf while maintaining the original factory profile and fit.

Fits:

• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

The rear parcel shelf is much more than an interior trim support. It forms an integral part of the 911's bodyshell, tying together the rear bulkhead, inner wings and surrounding body structure. Positioned directly behind the rear seats and above the engine compartment, it provides rigidity to the passenger compartment while supporting the rear interior trim, sound insulation and rear window area.

Because of its location, the parcel shelf is regularly exposed to moisture, condensation and water ingress from deteriorated rear window seals or body seams. Left untreated, corrosion can spread into neighbouring structural panels, making timely repairs essential for preserving the vehicle's strength and originality.

Manufactured to OE Match standards, this repair panel offers excellent dimensional accuracy, making it ideal for restoration projects, accident repairs and corrosion repairs on classic air-cooled Porsche 911 models.

Why Do Parcel Shelf Panels Fail?

The parcel shelf is one of the most common corrosion areas on classic Porsche 911 models. Water entering through ageing rear window seals, damaged seam sealant or blocked drainage paths often collects beneath the rear window and becomes trapped beneath insulation and trim.

Over many years this trapped moisture causes corrosion to develop from the inside out. Because much of the damage remains hidden beneath carpets, insulation and upholstery, extensive rust is often only discovered during restoration.

In addition to corrosion, parcel shelves may also become damaged through previous accident repairs, poor-quality welding or modifications carried out over the vehicle's lifetime.

If left untreated, corrosion can spread into the rear window aperture, inner wings, rear seat panel and chassis structure, significantly increasing repair costs.

When Should the Parcel Shelf Panel Be Replaced?

Replacement is recommended whenever corrosion or structural damage has compromised the original panel.

Typical signs include:

• Rust bubbles beneath the rear window
• Corrosion around the parcel shelf seams
• Soft or perforated metal
• Water leaks into the rear interior
• Previous poor-quality repairs
• Accident damage
• During complete body restorations or bare-metal rebuilds

Replacing the damaged section restores the original strength of the bodyshell while providing a solid foundation for paint, trim and rear window installation.

Porsche 911 Body Repair & Restoration Panels

Classic Porsche 911 bodyshells rely on strong, corrosion-free structural panels to maintain their rigidity, safety and value. The rear parcel shelf forms an important part of the passenger compartment and rear body structure, making it a key area to inspect during any restoration.

Replacing rusted panels with correctly manufactured OE Match repair sections helps preserve the originality of the vehicle while reducing the amount of fabrication required during body repairs. Combined with correct welding, rust prevention and cavity protection, a quality repair panel ensures a durable, long-lasting restoration.

Whether you're carrying out a concours rebuild, repairing accident damage or eliminating corrosion, replacing the parcel shelf panel is an investment in the long-term integrity of your Porsche 911.

Benefits of Replacing the Parcel Shelf Panel

Restores structural strength to the bodyshell Eliminates corrosion and weakened metal Prevents rust spreading into surrounding body panels Provides the correct fit for rear trim and window installation Reduces fabrication time during restoration Improves the quality and longevity of body repairs Ideal for concours restorations and professional bodyshops

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150195200

The product you are viewing cross references to these numbers

Parcel Shelf LWB (Long wheel base)

Fits:
Porsche 911 - 1972 to 1976

Diagram ref no 40.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150195200

The product you are viewing cross references to these numbers

Profile rail for engine bay seal, Rear, Engine bay,
length: 1 METER.



Fits:
Porsche 911 2.0-3.3 01/63-07/89

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150179720

The product you are viewing cross references to these numbers

Profile rail for engine bay seal, Rear, Engine bay,
length: 1 METER.



Fits:
Porsche 911 2.0-3.3 01/63-07/89

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150179720

The product you are viewing cross references to these numbers

Rear axle torsion bar tube reinforcement panel. 



Fits:
Porsche 911 - 1965 to 1978



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150101

The product you are viewing cross references to these numbers

Rear axle torsion bar tube repair panel.



Fits:
Porsche 911 1965-68*
Porsche 911 1968-89

*Right side panel has 2 ridges for the oil pipes as it is later type model. Would fit the early car as well but it will be different in appearance from original.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150101

The product you are viewing cross references to these numbers