Floor Boards LHD Cars

Alloy floor board is designed specifically for the passenger-side footwell area of early Porsche 911 Targa (1969-1983, left-hand-drive). It replaces the original pedal-floor board under the glove compartment and foot-rest area.

Fits:
Porsche from 1969–1983 with LHD (Left-Hand drive)

The board is designed for direct fitment into the factory mounting positions, retaining correct cut-outs for pedals, carpet interface and trim anchorage. Suitable for restoration, upgrade or replacement applications where the original floor board is corroded, bent or missing.

•  Function: Replaces the floor panel under the passenger side footwell / pedal area for restoration or replacement
•  Position: Interior – passenger’s footwell / under glovebox area
•  Benefits: Lightweight, improved rigidity, corrosion resistant, accurate fit
•  Installation: Notes Remove old board, fit to factory mounting points, secure with original or new fixings; ensure trim and carpet integration

Over time, the original passenger floor board in a classic Porsche 911 can suffer from corrosion, dents, damaged mounting tabs or structural fatigue — especially in footwell areas exposed to moisture, foot traffic or trim removal. A compromised floor board can affect carpet fitment, pedal alignment or interior appearance.

Replace this part when:
•  The original board is rust-affected, bent, cracked or missing
•  You’re performing a restoration or interior refurbishment of your Porsche 911 Targa
•  You want to upgrade to lightweight, rigid aluminium construction for improved durability and finish

By installing the alloy floor board, you restore the correct structural support, improve interior aesthetics, and ensure your classic Targa retains its factory-intended fit and finish.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155106442

The product you are viewing cross references to these numbers

Drivers side aluminium floor board.
Available in black or clear

Fits
Porsche 911 1965 - 1973 LHD Coupe Only

Made from 5 series aluminum for low weight and high strength, these are dimpled by hand in for additional weight reduction and increased stiffness. Further
surface treated and anodized for increased wear and corrosion resistance, an exceptionally durable finish, and a killer look

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-FB-10-

The product you are viewing cross references to these numbers

Bracket for mounting the floorboard, lower.
Sold each.

Fits:
Porsche 911 / 912 1965-1983 excluding Turbo
Porsche 914 1970-1976

Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150139000

The product you are viewing cross references to these numbers

Dished washer for floorboard. 



Fits:
Porsche 911 - 1965 to 1989
Porsche 993 - 1994 to 1998
Porsche 924 - 1976 to 1979
Porsche 944 - 1985 to 1991
Porsche 968 - 1992 to 1995

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142336800

The product you are viewing cross references to these numbers

Dished washer for floorboard. 



Fits:
Porsche 911 - 1965 to 1989
Porsche 993 - 1994 to 1998
Porsche 924 - 1976 to 1979
Porsche 944 - 1985 to 1991
Porsche 968 - 1992 to 1995

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142336800

The product you are viewing cross references to these numbers

Hybrid Pedalboard. LEFT.

Fits:
Porsche 911 Coupe (1965-1967) LHD Cars
Porsche 911 Coupe (1968-1973) LHD Cars
Porsche 911 Targa (1968-1973) LHD Cars
Porsche 911 Targa/Cabriolet ('76) LHD Cars

The 911 driver's side boards (bent boards) that we have grouped together are so similar that we have created our own hybrid board (marked with a star) that will fit all of the Porsche numbers occurring below it in the set. That way, only one board needs to be purchased to cover all of these parts.

Hybrid Pedalboard FITTING GUIDE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155106392

The product you are viewing cross references to these numbers

Hybrid Pedalboard. LEFT.

Fits:
Porsche 911 Targa (1976) LHD Cars
Porsche 911 Targa/Cabriolet (1977-89) LHD Cars

The 911 driver's side boards (bent boards) that we have grouped together are so similar that we have created our own hybrid board (marked with a star) that will fit all of the Porsche numbers occurring below it in the set. That way, only one board needs to be purchased to cover all of these parts.

Hybrid Pedalboard FITTING GUIDE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155106393

The product you are viewing cross references to these numbers

Lower mounting tab for pedal floor board.
Sold each.

Fits:
Porsche 911 2.0-3.3 01/63-07/89
Porsche 912 1.6 01/65-02/70

Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150139000

The product you are viewing cross references to these numbers

Passenger (wood material) floorboard for Porsche 911 Targa models from 1969–1983 with LHD. This a beautiful OEM specification board in laminated birchwood. Identical to Porsche part nr. 90155106442.

This pedal floor board is made from laminated birchwood just like the original. All openings and edges are CNC finished to guarantee a factory authentic fit and finish.

Available for LHD cars only.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155106442

The product you are viewing cross references to these numbers

Passenger (Plastic composite) floorboard for Porsche 911 Targa models from 1969–1983 with LHD. Identical to Porsche part nr. 90155106442.



Fits:
Porsche 911 Targa 1969-1983 LHD

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155106442

The product you are viewing cross references to these numbers

Reproduction Pedal Floor Board For LHD Cars.
RIGHT (wood material).
The OE Match Reproduction Pedal Floor Board for LHD Cars is a premium-quality replacement interior body panel designed to restore the original pedal area of compatible left-hand drive classic Porsche models. Manufactured to OE specifications for fit, profile and durability, this reproduction floor board provides the correct support for the pedal assembly while maintaining the authentic factory appearance of the driver's footwell.  

Fits:

• Provides structural support beneath the pedal assembly.
• Restores the original appearance of the driver's footwell.
• Maintains correct positioning of the pedal area components.
• Supports the floor mat and carpet installation.
• Helps protect the vehicle floor beneath the pedals.
• Replaces damaged or deteriorated original floor boards.
• Provides factory-style fitment for left-hand drive vehicles.
• Forms an essential part of the interior floor assembly.

Symptoms Of Wear Or Failure:

• Cracked, broken or weakened board.
• Soft or sagging pedal floor area.
• Water damage or swelling.
• Delamination of the board material.
• Loose or poorly fitting floor board.
• Difficulty securing carpets or floor mats.
• Excessive movement beneath the pedals.
• Cosmetic deterioration of the footwell.
• Signs of age-related wear or moisture damage.
• Reduced originality during restoration.

Why Replacement Matters:

• The pedal floor board is subjected to constant foot pressure, moisture, dirt and vibration throughout the life of the vehicle. Over time, the original material can deteriorate, warp, crack or absorb moisture, reducing its structural integrity and affecting the appearance of the driver's footwell.
• A damaged floor board can allow excessive movement beneath the pedals, reduce support for carpets and interior trim and detract from the quality of a restoration. Moisture-damaged boards may also contribute to corrosion of the underlying floor pan if left unattended.
• Replacing a worn or damaged pedal floor board restores the original support, appearance and functionality of the driver's footwell. The OE Match reproduction provides factory-style fitment, premium-quality construction and long-lasting durability, making it the ideal solution for Porsche restoration, repair and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155106420

The product you are viewing cross references to these numbers

Reproduction Pedal Floor Board for LHD Cars.
RIGHT (Plastic composite)


Fits:
Porsche 911 1965-68 LHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155106420

The product you are viewing cross references to these numbers

Reproduction Pedal Floor Board for LHD Cars.
RIGHT (Plastic composite).



Fits:
Porsche 911 1969-83 LHD Cars Coupe & Manual cars only

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155106422

The product you are viewing cross references to these numbers

Reproduction Pedal Floor Board For LHD Coupe Cars With Fixings.
The OE Match Reproduction Pedal Floor Board for LHD Coupe Cars with Fixings is a premium-quality replacement interior floor panel designed to restore the original pedal area of compatible left-hand drive Porsche Coupe models. Manufactured to OE specifications for fit, profile and durability, this reproduction pedal floor board provides the correct support beneath the pedal assembly while preserving the authentic factory appearance of the driver's footwell.  

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F) 

Manufactured from high-quality automotive-grade board material with a durable protective finish, the floor board is precision-cut and formed to replicate the original Porsche design. Supplied complete with the required fixings, it allows straightforward OE-style installation using the original mounting locations. Designed to withstand continual pedal operation, foot traffic, vibration and temperature fluctuations, it is the ideal replacement for deteriorated, damaged or moisture-affected original floor boards during restoration or refurbishment.

What This Product Does:

• Provides structural support beneath the pedal assembly.
• Restores the original appearance of the driver's footwell.
• Maintains correct positioning of the pedal area components.
• Supports the installation of carpets and floor mats.
• Helps protect the underlying floor pan.
• Includes the necessary fixings for installation.
• Provides factory-style fitment for left-hand drive Coupe models.
• Forms an essential part of the vehicle's interior floor assembly.

Symptoms Of Wear Or Failure:

• Cracked, broken or weakened board.
• Soft or sagging pedal area.
• Water damage or swelling.
• Delaminated or deteriorated board material.
• Loose or poorly fitting floor board.
• Missing or damaged mounting fixings.
• Excessive movement beneath the pedals.
• Difficulty securing carpets or floor mats.
• Cosmetic deterioration of the driver's footwell.
• Reduced originality during restoration.

Why Replacement Matters:

• The pedal floor board is exposed to constant foot pressure, moisture, dirt and vibration throughout the life of the vehicle. Over time, the original material can deteriorate, crack or absorb moisture, reducing its structural strength and affecting the appearance and functionality of the driver's footwell.
• A damaged floor board can allow excessive movement beneath the pedals, reduce support for carpets and interior trim, and leave the underlying floor pan more vulnerable to moisture and corrosion. Missing or damaged fixings can also result in movement, rattles and poor installation quality.
• Replacing a worn or damaged pedal floor board restores the original support, fit and appearance of the driver's footwell. The OE Match reproduction is supplied complete with the correct fixings and offers factory-style fitment, premium-quality construction and long-lasting durability, making it the ideal solution for Porsche restoration, repair and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155106323

The product you are viewing cross references to these numbers

Reproduction pedal floor board for LHD Targa Cars with fixings.

Fits:
Porsche 911 1965-73 Targa LHD Car, Manual gearbox
(not for SPM Sportomatic cars)

This bottom board is glued and pressed as original wood in multiple layers.
All cutouts are CNC-milled, in the correct angle, the wood is stained dark.
All add-on parts are new and already assembled.
The board is ready for installation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155106342

The product you are viewing cross references to these numbers