Targa

Rear roll bar seal for Porsche Targa models.

Fits:
Porsche 911 1965-69

Diagram Ref: 41

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156509140

The product you are viewing cross references to these numbers

Reinforcement plate set Targa roof - 2 pieces
These plates are fitted to the Targa frame area to bolster structural rigidity, reduce frame flex, and help maintain proper alignment of the removable Targa roof section. Made from aluminium with OE-style dimensions and finish, the set offers reliable support for the roof structure and helps protect the body from stress cracks or deformation caused by chassis flex or road loads. 
Sold as a set of two plates - one each side of the Targa hoop area.

Fits:
Porsche 911 - 1967 to 1985
Porsche 912 - 1967 to 1969

• Material: Aluminium, offering strength while reducing added weight.
• Fitment: Left and right sides of the Targa roof frame

Over time, the Targa frame section can suffer fatigue, stress cracking, or deformation due to removable roof panels, body flex, or prolonged road use. These issues can lead to misalignment of the roof, subtle leaks, wind noise or diminished structural integrity. Installing a new reinforcement plate set restores correct support, helps maintain chassis integrity and protects the Targa roof fit and body alignment for years to come.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90159800240

The product you are viewing cross references to these numbers

Reinforcement plate set Targa roof - 3 pieces 

Fits:
Porsche 911 - 1967 to 1989
Porsche 912 - 1967 to 1969
Porsche 964 - 1989 to 1994

Set of 3 reinforcement plates for the Targa roof.
Plates are made of aluminum  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90159800240

The product you are viewing cross references to these numbers

Rennline Targa top locking pin, Stainless steel.
Sold Individually (2 required per car).

Fits:
Porsche 911/912/930 1965-85

Rennline's Stainless Steel Targa top locking pin replaces the pot metal factory unit that is prone to splitting. Once split, your targa top latch will be inoperable, leaving you without a roof over your head. Replace yours with Rennline's precision machined, 304 stainless steel upgrade.

Repair Mount set.
Restore the front mounting integrity of your Porsche 911 Targa’s / Cabrio's roof mechanism with this repair mount. Specifically designed for 911 Targa (1967-1985) and Cabriolet models (1982-1985), this kit includes mount and tension spring to replace worn or damaged front roof attachment points.
2pcs will be required if you want to repair both mechanisms.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Fits On To Diagram Ref No 3

What This Product Does:

• The Targa roof or Convertible top mechanism on classic 911s uses mounts/attachments to latch, pivot or tension the roof panel correctly.
• This repair mount is likely a small but critical component: it could serve as a mount point or pivot for the front Targa roof bar, or the latch/hinge assembly.
• The included tension spring suggests it plays a role in the roof-mechanism’s spring-loaded or tensioned latch/pivot function.
• Because it is labeled “repair mount”, it is likely used when the original mount has worn, broken, or been replaced incorrectly.

Signs You Might Need It:

• The roof panel doesn’t line up correctly, has excessive play, or the front bar doesn’t seat flush with the body when the roof is closed.
  
• The roof mechanism (especially the front section) feels loose or worn, or you find the mount/pivot is broken, cracked or missing.
  
• The tension spring associated with the mount is missing, fatigued, weak or broken, causing the roof latch not to hold firmly.
  
• During a restoration or refurb, the original mount is corroded, has poor repair history, or rust has eaten the mounting point.
• The roof could be mis-aligned, rattles, leaks at the front edge, or the roof bar is not seating properly — indicating the mount that holds the bar might have failed.

Why Replacement Matters:

• Roof integrity & alignment: The roof’s fit and finish depend on correct mounts and tensioning. A worn mount can lead to misalignment, water ingress, wind noise and reduced value.
  
• Correct operation: The roof mechanism must pivot, latch and hold reliably. A compromised mount can affect the reliable opening/closing of the roof.
  
• Preserves structural & aesthetic value: On classic 911 models, original mechanism parts matter for authenticity, fitment and resale.
  
• Prevents further damage: A faulty mounting point can lead to stress on adjacent components (roof bar, hinge, seals) — replacing the mount helps prevent accelerated wear.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156503141

The product you are viewing cross references to these numbers

Roof plate.

Fits:
Porsche 911-912 Targa

Roof plate 911 Targa roof. This Plate is special made for restoring your targa roof. Plate is slightly over sized in length. They should be cut to the right length for perfect fit (arrow).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156521

The product you are viewing cross references to these numbers

Spacer bush for soft, zip targa roof. 
Sold each - 2 required per car

Fits:
Porsche 911 / 912 - 1965 to 1971

 Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156581940

The product you are viewing cross references to these numbers

Targa bar inner air vent cover. Set of 2 Left & Right Porsche 911

Fits:
Porsche 911 Targa

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156515758

The product you are viewing cross references to these numbers

Targa Bar Plastic Screw. 24mm, Four needed. Price is for each.

Fits:
Porsche 911/912 1965-69 Targa
Porsche 911 1970-89 Targa
Porsche 964 C2 / C4 1989-94 Targa

This product supersedes Porsche's old part numbers:
- 90180115340

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99906403740

The product you are viewing cross references to these numbers

Targa Rear Soft Window Bag
Reproduction

Fits:
Porsche 911 / 912 1967-69

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901000773

The product you are viewing cross references to these numbers

Targa roof catch.

Fits:
Porsche 911 1965 - 1985 Targa

Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156503141

The product you are viewing cross references to these numbers

Targa Roof Clip Screw. AM 4 x 8. Sixteen required. Price is for each.

Fits:
Porsche 911/912 1967-69 Targa
Porsche 911 1970-87 Targa
Porsche 964 C2 / C4 1989-94 Targa

Click 'Zoom in' for large parts diagram.
Diagram ref no 34

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99921900602

The product you are viewing cross references to these numbers

Targa roof clip. Eight clips required per car. Price is for each.

Fits:
Porsche 911/912 1967-69 Targa
Porsche 911 1970-87 Targa
Porsche 964 C2 / C4 1989-94 Targa

Click 'Zoom in' for large parts diagram.
Diagram ref no 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96456526501

The product you are viewing cross references to these numbers

The OE Match Targa roof clip is a replacement retaining component for the removable roof assembly on the Porsche 911, 912 and 964 Targa applications below. It supports repairs to worn, damaged or missing roof retaining hardware.

Fits:

• Porsche 964 (911) C2 1989–93
• Porsche 964 (911) C4 1989–93
• Porsche 911 1965–1968 2.0L / 912 SWB (F)
• Porsche 911 1968–1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974–1977 2.7L / 1976–77 3.0 Carrera
• Porsche 911 1984–1986 3.2L
• Porsche 911 1987–1989 3.2L G50
• Porsche 911 1978–1983 3.0L / SC

Diagram Ref No 33

For Targa roof applications only. The broader model listings above must be read alongside the specific Targa applications. Check fitment for your specific vehicle (model, year, engine) before ordering.

Required Quantity
Eight clips are required per car. Supplied individually.

What Is This Part?
This clip forms part of the removable Targa roof assembly and is identified as a latch in Porsche's parts documentation. It works within the roof's retaining arrangement alongside separate fixings and frame components. When refurbishing a roof, the clip and its mounting points should be assessed together rather than replacing hardware solely because the roof is being dismantled. 

What Does This Part Do?

• Provides retention: Acts as a retaining element within the removable Targa roof assembly. 
• Works with its fixings: Relies on sound mounting hardware and attachment points to remain correctly positioned. 
• Supports roof refurbishment: Allows a damaged or missing clip to be renewed as part of a condition-based repair.

Why Replace This Part?
Replacement is appropriate if inspection shows that the clip is damaged, distorted or no longer retained securely at its mounting point. Damage to the clip or its attachment can prevent it from performing its retaining role correctly. Inspect the adjoining frame and fixings at the same time so that a replacement is not fitted to an already damaged mounting point.

Roof rattles, poor seating, wind noise or water ingress warrant inspection of the complete roof arrangement, including catches, alignment and seals. These symptoms do not establish that this clip is faulty, and replacing it alone should not be treated as a cure for an incorrectly adjusted roof or deteriorated seals. Porsche's workshop guidance treats catch condition, roof adjustment and sealing as separate checks.

When to Replace This Part?

• Visible damage: The clip is cracked, bent or otherwise unable to retain its intended shape.
• Missing hardware: A clip is absent from the roof assembly.
• Poor attachment: The clip remains loose after its fixings and mounting points have been checked.
• During refurbishment: Removal exposes damage or wear that prevents satisfactory refitting.
• Unresolved roof movement: Inspection identifies this clip, rather than another catch, fixing or frame component, as the cause.

Where Is This Part Fitted?
Location: Within the removable Targa roof assembly, alongside its retaining hardware and roof frame components. 

Product Summary

• Product: Targa roof clip.
• Brand: OE Match.
• Reference: 96456526500.
• Purpose: Replacement retaining hardware for the removable Targa roof assembly.
• Supply: Individual clip; eight required per car.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96456526501

The product you are viewing cross references to these numbers

Targa roof locating peg, Transparent
OE Match transparent Targa top locating peg for Porsche 911 Targa models from 1967 to 1977. This replacement roof component helps locate and position the removable Targa top correctly when fitted to the vehicle. Suitable for replacing worn, damaged, discoloured or missing original locating pegs.
Sold individually, with 2 required per vehicle.

Fits
Porsche 911 1967 - 1977 Targa

Design Ref No: 13

The Targa top locating peg forms part of the removable roof locating system. It helps guide the roof panel into its correct position during installation and supports accurate alignment with the corresponding roof mounting points. This version is supplied in a transparent finish and is designed to match the original-style application.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156521642

The product you are viewing cross references to these numbers

Soft window restoration kit for Porsche 911 Targa models 1967-1968. This is a gorgeous, OEM specification rear window section suitable for cars originally equipped with the soft window or conversions.

Our soft window restoration kit is among the best available for originality and fit. We use the original German materials that exactly match Stüttgart factory specifications; "Deep grain" vinyl, scratch resistant DOT approved window plastic, YKK heavy duty zippers and high resistance yarns. All materials are precision cut, pressure glued, form-stitched and edge bound to guarantee a factory authentic fit.

A lot of '67-'68 Targa models were converted to glass rear window in later years. Our kit can be used to convert cars back to soft window specification. Hardware needed for such conversion including handles, handle receivers, tensioning bows, seals and tenax buttons are not included in this kit.

The kit comes with step-by-step installation instructions and pictures. Installation requires no specific tools and is within the ability of a moderately experienced home mechanic.

Fits:
Porsche 911 1967-68

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156500002

The product you are viewing cross references to these numbers