Boots / Rear Lid / Locks and Latches

This OE Match drain hose spring clamp is suitable for Porsche 914 models from 1970 to 1976. It is used within the water drainage arrangements associated with the engine-compartment lid and fresh-air ventilation system.

Fits

• Porsche 914 1970-1976

Diagram ref no 41

What This Product Does

The spring clamp holds the drain hose securely against its corresponding connection. Its clamping force helps keep the hose correctly located while allowing the original-style drainage assembly to be retained.

Functions

• Secures a water drain hose to its connection
• Helps prevent the hose from moving or separating
• Supports correct water routing through the drainage system
• Replaces a missing, damaged or weakened clamp

Technical Details

• Part type: drain hose spring clamp
• Engine-compartment lid application: Porsche 914 1970–76
• Ventilation and heating application: Porsche 914 from 1972 onwards
• Parts diagrams specify two clamps per applicable assembly
• Diagram reference: 41

Symptoms of Fault

• Drain hose is loose or disconnected
• Clamp no longer grips the hose firmly
• Visible distortion or damage to the existing spring clamp
• Water is not being directed through the intended drain hose

Why Replacement Matters

A secure clamp keeps the drain hose seated and helps the drainage arrangement guide water through its intended route. Replacement is appropriate when the original clamp is missing, damaged or no longer provides adequate retention.

FAQs

• Is this clamp supplied individually?
  This part is sold individually.
• How many clamps are shown in the assemblies?
  The engine-compartment lid and ventilation/heating diagrams each specify a quantity of two for the relevant installation.
• When should the clamp be replaced?
  Renew it if it is absent, visibly damaged or unable to hold the drain hose securely.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99951216502

The product you are viewing cross references to these numbers

Drip pan funnel. This bolts into the sides of the engine compartment and directs water from the rain tray into the rain tray tubes.

Used for all 914 model years, 2 required per car, 1 on each side of the engine compartment.

Fits:
Porsche 914 1970-1976

Click 'Zoom in' for large parts diagram.
Diagram ref no 37

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91455923110

The product you are viewing cross references to these numbers

The Engine Lid Drip Pan

Mounted beneath the ventilated engine lid, it forms part of the vehicle's rainwater drainage arrangement and helps prevent water passing directly into the engine compartment.

Fits

• Porsche 914-4 1970–76

Not for Porsche 914-6

Diagram ref no 34

What This Product Does

This shaped drip pan collects rainwater entering through the engine lid grille and guides it towards the associated drainage components. It helps protect the engine compartment from direct water ingress while retaining the original layout of the rear lid assembly. Early and late versions are offered, so the correct configuration must be selected for the vehicle.

Functions

• Collects water entering through the engine lid grille
• Directs collected water towards the drainage system
• Reduces direct water entry into the engine compartment
• Supports restoration of the original engine-lid arrangement
• Provides an OE-style replacement for a damaged or missing pan

Technical Details

• Product type: engine lid drip pan or rain tray
• Installation area: beneath the rear engine lid grille
• Application: Porsche 914-4, 1970–76
• Exclusion: not suitable for Porsche 914-6
• Exploded-parts diagram reference: 34

Symptoms of Fault

• Cracks, splits or broken mounting areas in the existing pan
• A missing tray beneath the engine lid grille
• Water entering or collecting within the engine compartment
• Water failing to reach the intended drain points
• Loose or distorted fit beneath the engine lid
• Deteriorated associated funnels, hoses, clamps or grommets

Why Replacement Matters

A cracked, distorted or absent drip pan cannot manage rainwater as intended. Replacing it restores the designed drainage path and limits unnecessary moisture around engine-compartment components. During installation, inspect the surrounding drain funnels, hoses, seals, clamps and fixings, as worn supporting parts may prevent the renewed pan from draining correctly. OE Match components are intended as OE-style replacements, but the vehicle year and tray version should be checked before installation.

FAQs

• What is the purpose of the engine lid drip pan?
  It catches rainwater passing through the engine lid grille and channels it towards the engine-compartment drainage system.
• Does this drip pan fit the Porsche 914-6?
  No. The supplied exploded-parts diagram identifies this component as unsuitable for the 914-6.
• How do I choose between the early and late versions?
  Compare the existing tray, mounting arrangement and vehicle production year before selecting the appropriate configuration.
• What else should be inspected during replacement?
  Check the drain funnels, hoses, grommets, clamps and mounting hardware for cracking, blockage, corrosion or deterioration.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91451218910

The product you are viewing cross references to these numbers

Engine lid latch hook kit.

Fits:
Porsche 914 1970-76

Kit w/Hardware Includes:
(1) 91451215510 Hook
(1) 90007606402 M8 nut
(1) 90002500703 Flat washer
(1) N0122411 Spring washer

Click 'Zoom in' for large parts diagram.
Diagram ref no 24, 25, 26 and 27.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91451215510K

The product you are viewing cross references to these numbers

Engine lid latch receiver.

Fits:
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91451202910

The product you are viewing cross references to these numbers

Engine tin rain tube funnel grommet

This silicone sleeve fits into the engine shelf and supports the rain tray drip tube. It is supplied individually, with two required per car and one fitted on each side.

Fits

• Porsche 914 1970–1976

Diagram ref no 19

What This Product Does

The grommet locates the rain tray drain tube where it passes through the engine tinware. It cushions and supports the tube while helping to close the surrounding gap, maintaining separation between the upper engine compartment and the hotter area below.

Functions

• Holds the rain tray drip tube in its correct position
• Protects the tube where it passes through the engine shelf
• Closes the opening around the drain tube
• Supports correct drainage from the engine-lid rain tray
• Replaces a missing, split or deteriorated sleeve

Technical Details

• Product type: rain tube funnel grommet or rubber sleeve
• Material: silicone
• Installation position: engine shelf or engine tinware
• Quantity required: two per vehicle, one per side
• Supplied quantity: one grommet

Symptoms of Fault

• Rain tray drip tube is loose or displaced
• Grommet is cracked, split, distorted or missing
• Visible gap around the drain tube opening
• Drain tube rubs directly against the engine tinware
• Water is not guided cleanly through the intended drain route

Why Replacement Matters

Renewing a worn or absent grommet restores support for the rain tray tube and closes the opening around it. Replacement is particularly appropriate when servicing the rain tray, drain hoses or adjacent engine-compartment tinware. Inspect both sides, as the vehicle uses two grommets.

FAQs

• How many grommets are required?
  Two are used per vehicle, with one fitted on each side.
• Is this supplied as a pair?
  No. The grommet is supplied individually.
• Where is it installed?
  It sits in the engine shelf around the rain tray drip tube.
• Should related components be inspected?
  Check the rain tray funnels, drain hoses and retaining clamps for ageing, damage or incorrect positioning during installation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970209150

The product you are viewing cross references to these numbers

Lid Release Cable Handle. 

The Genuine Porsche Lid Release Cable Handle (Part Number: 90155281320) is an original equipment interior operating component designed for selected classic Porsche models, including the Porsche 911, 912, 914, 930 Turbo, 964 and 968.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94  

Diagram Ref No 28

Also referred to as a bonnet release handle, engine lid release handle or cable pull handle, this component provides the manual grip used to operate the relevant lid release cable.

Depending on the vehicle and installation position, the handle allows the driver to release the front luggage compartment lid, rear engine lid or rear hatch.

The handle forms part of a mechanical release system consisting of a pull cable, cable guide, latch and associated mounting components.

When the handle is pulled, the applied force is transferred through the release cable to the corresponding latch mechanism. This disengages the latch and allows the lid to be opened.

Manufactured to Porsche's original equipment specification, the Genuine Porsche handle is intended to maintain the correct operation and appearance of the original release assembly.

Although relatively small, this component plays an important role in providing convenient access to essential areas of the vehicle.

On classic Porsche 911 models, the front luggage compartment houses components such as the fuel tank, spare wheel and other service-related equipment, while the rear engine lid provides access to the engine compartment.

A reliable release handle is therefore important for routine maintenance, vehicle inspections and mechanical servicing.

Over time, the original handle may deteriorate through repeated use, ageing, mechanical stress or excessive pulling force.

Cracks, broken attachment points or damage around the cable connection may prevent the handle from operating the release mechanism correctly.

A damaged handle may feel loose, become difficult to grip or separate from the cable assembly.

Replacing a worn or broken release handle with a Genuine Porsche component helps restore dependable operation of the corresponding lid release system while preserving the original interior appearance.

Ideal for classic Porsche maintenance, bonnet and engine lid repairs, interior refurbishment and restoration projects, this Genuine Porsche Lid Release Cable Handle provides a factory-specified replacement for compatible applications.

What This Product Does:
The lid release cable handle is the manually operated component of the bonnet, engine lid or rear hatch release mechanism.

Its primary function is to allow the driver to pull the release cable and disengage the corresponding latch.

When the handle is pulled, the movement creates tension in the attached cable.

This tension is transmitted to the latch mechanism, allowing the relevant bonnet or lid to be released.

The handle must remain securely connected to the cable and provide sufficient grip for reliable operation.

Its main functions include:

• Operating the release cable: Transfers pulling force from the handle to the mechanical cable.
• Releasing the front bonnet: Allows access to the front luggage compartment on applicable models.
• Releasing the rear engine lid: Provides access to the engine compartment on applicable models.
• Operating the rear hatch release: Performs the corresponding release function on selected Porsche 968 applications.
• Providing a secure grip: Allows the release mechanism to be operated conveniently.
• Supporting reliable latch operation: Helps the cable receive the movement required to disengage the latch.
• Maintaining original functionality: Preserves the factory-designed mechanical release arrangement.
• Reducing unnecessary cable strain: Provides the intended pulling point when the cable and latch operate freely.
• Supporting routine maintenance: Allows access to the relevant vehicle compartment.
• Preserving interior originality: Maintains the appearance and operation of the original Porsche release control.

Symptoms Of Wear Or Failure:
The lid release handle is subjected to repeated pulling forces during normal vehicle use.

Ageing, mechanical damage or excessive resistance within the release mechanism may cause the handle to deteriorate.

Common symptoms and signs of a worn or damaged release handle include:

• Cracked handle: Visible cracks may develop around the grip or cable attachment area.
• Broken handle: The handle may fracture completely and become unusable.
• Loose or wobbly operation: A damaged attachment may allow excessive movement.
• Handle separating from the cable: The release handle may no longer remain securely connected.
• Difficulty pulling the handle: The grip may be damaged or difficult to operate.
• Handle slipping during operation: A worn connection may prevent force from being transferred reliably.
• Excessive free movement: The handle may move without operating the release cable.
• Damaged mounting points: Cracked or broken retaining features may affect installation.
• Visible deformation: Excessive pulling force may distort the handle.
• Loose retaining hardware: Damaged or missing fixing components may affect handle security.
• Intermittent lid release: The lid may release inconsistently if the handle-to-cable connection is defective.
• Complete failure to release the lid: A broken handle may prevent normal operation.
• Missing handle: The cable may remain exposed without its intended operating grip.
• Visible ageing: Surface deterioration may affect the handle's appearance or condition.
• Damage during servicing: Incorrect removal or excessive force may damage the original component.

Why Replacement Matters:
Replacing a defective release handle helps maintain reliable access to the vehicle's front luggage compartment, engine bay or rear hatch.

A cracked or loose handle may no longer provide sufficient grip or transfer the pulling force required to operate the release cable.

If the handle fails completely, the corresponding lid may become difficult to open using the normal release mechanism.

This can complicate routine maintenance and make it harder to access components requiring inspection or repair.

Installing a Genuine Porsche replacement Lid Release Cable Handle helps to:

• Restore reliable lid release operation: Replace a broken or worn operating handle.
• Maintain convenient compartment access: Allow the relevant bonnet, engine lid or hatch to be opened normally.
• Provide a secure grip: Restore the intended manual pulling point.
• Maintain correct cable operation: Support effective transfer of force to the release cable.
• Replace damaged attachment points: Renew a handle that no longer connects securely.
• Reduce the risk of complete handle failure: Replace cracked or weakened material before it breaks.
• Improve ease of use: Restore normal operation where the defective handle caused difficulty.
• Support routine maintenance: Maintain access for engine, luggage compartment or related vehicle servicing.
• Preserve original interior appearance: Replace an aged or damaged component with a factory-specified part.
• Support bonnet and latch repairs: Provide a replacement handle during release mechanism refurbishment.
• Maintain classic Porsche originality: Preserve the original control arrangement.
• Support long-term reliability: Restore a sound mechanical connection within the release system.
• Maintain Genuine Porsche quality: Use the corresponding original equipment component.

Replacement is particularly recommended when the handle is cracked, broken, loose, missing or unable to operate the cable reliably.

If the release cable or latch is seized or excessively stiff, those components must also be repaired. Replacing the handle alone will not correct excessive resistance elsewhere in the system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155281320

The product you are viewing cross references to these numbers

Stock rear bonnet. Including thread inserts for hinges and bonnet lock.

Fits:
Porsche 914

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK161A

The product you are viewing cross references to these numbers

Rear hood 914 GT with balsa wood inlays.
Including thread inserts for hinges and bonnet lock.

Fits:
Porsche 914 GT

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

This OE Match seal fits the rear lid / trunk lock on Porsche 914 models from 1970–1976. It is a replacement sealing component for the rear luggage compartment lock area.

Fits

• Porsche 914 1970-76

Diagram Ref No 13

What This Product Does
The seal forms part of the rear luggage compartment lock installation, helping to seal the area around the lock. It is distinct from the push-button lock, lock cylinder and lid latch components shown in the same assembly.

Functions

• Provides sealing around the rear luggage compartment lock.
• Replaces a deteriorated or missing lock-area seal during repair or restoration.

Technical Details

• Part reference: 91451219310.
• Application: Porsche 914, 1970–1976.
• Position: rear luggage compartment lock.
• Internal diagram description: desk pad.

Symptoms of Fault

• Water entering around the rear lock area.
• Visible splitting, deterioration or damage to the existing seal.
• Poor seating caused by an incorrect or mismatched seal.

Why Replacement Matters
Renewing a damaged seal addresses deterioration at the lock installation during maintenance or body restoration. Inspect the surrounding bodywork and lock mounting area at the same time; replacing this seal will not correct a worn latch, damaged release mechanism or lid misalignment.

FAQs

Is this a complete rear lock?
No. This product is the sealing component, rather than the push-button lock or latch assembly.

What should I check before choosing it?
Compare reference 91451219310 with the existing component and confirm the vehicle application. Check the adjoining lock parts for damage before fitting.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91451219310

The product you are viewing cross references to these numbers

Upper cylinder push lock for rear luggage compartment lid. Made in Germany.

Fits:
Porsche 914 1970-76

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91451204111

The product you are viewing cross references to these numbers

Upper cylinder push lock for rear luggage compartment lid.

Fits:
Porsche 914 1970-76

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91451204111

The product you are viewing cross references to these numbers

Rubber stop for front bonnet / rear lid.


Porsche 911 2.0-3.3 1965-89
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76


Porsche 911 2.0-3.3 1965-73
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76

Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970303650

The product you are viewing cross references to these numbers

OE Match Rear Trunk Lock Repair Kit

The OE Match Rear Trunk Lock Repair Kit is designed to restore the appearance and operation of the rear luggage compartment lock fitted to Porsche 914 models from 1970 to 1976.

Fits:

• Porsche 914 1970-76

Diagram ref no 12, 13

Over time, original trunk locks can become worn, corroded or difficult to operate. This replacement kit provides the essential components for refurbishing the lock assembly while maintaining the original-style chrome finish.

Kit Contents

Chrome lock housing Chrome lock cylinder barrel Rear trunk lock seal

What Does It Do?

The rear trunk lock secures the luggage compartment lid and allows access using the vehicle key. The housing supports the locking mechanism, while the seal helps prevent moisture entering around the installation.

Why Does It Fail?

Common causes of failure include:

• Worn or seized lock cylinder
• Corrosion and moisture damage
• Damaged chrome housing
• Hardened or cracked rubber seal
• General wear from repeated use

When Should It Be Replaced?

Replace the lock components if the key becomes difficult to turn, the mechanism sticks, the housing is damaged or the seal has deteriorated.

The kit is also ideal for restoring the original appearance of the rear trunk lock during bodywork refurbishment.

Installation Notes

Inspect the existing latch and mounting hardware before fitting. Check lock operation with the trunk lid open before closing it. Key compatibility or re-keying requirements should be confirmed separately.

Porsche 914 Rear Trunk Locks & Restoration Parts

The Porsche 914 rear luggage compartment lock is an essential part of the vehicle's original bodywork and security system.

OE Match repair kit 914512913K provides replacement chrome lock components and a seal for Porsche 914 models manufactured between 1970 and 1976.

Ideal for repairing worn locks or completing a classic Porsche restoration, this kit helps maintain the original appearance and functionality of the rear trunk assembly.

Design911 supplies Porsche 914 trunk locks, boot lid latches, seals and associated restoration components.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

914512913K

The product you are viewing cross references to these numbers

The Water Drain Hose Kit

These newly manufactured PVC hoses replace aged, damaged or missing drainage tubes associated with the engine-lid rain tray and fresh-air ventilation box.

Fits

• Porsche 914 1970–76
  
  

What This Product Does

The hoses provide defined drainage paths for rainwater collected by the relevant tray or air-box assembly. Correctly routed drains help direct water away instead of allowing it to collect around adjacent bodywork and components.

Functions

• Routes collected rainwater through the vehicle drainage system
• Connects to the rain-tray or fresh-air box drain points, depending on application
• Replaces hoses that have hardened, split, become blocked or detached
• Helps limit unwanted water accumulation around the associated assembly

Technical Details

• Construction: high-grade PVC
• New-production replacement hose kit
• Internal parts data identifies 75 mm and 400 mm hose applications, plus an additional unspecified-length drain hose
• Used within the engine-compartment lid and ventilation/heating drainage assemblies
• One kit is required for each application

Symptoms of Fault

• Cracked, brittle or missing drain hoses
• Water collecting beneath the rain tray or around the fresh-air box
• Restricted drainage caused by debris or collapsed hose walls
• Drain tubes becoming loose at their connection points
• Visible dampness or corrosion near drainage areas

Why Replacement Matters

Drain hoses deteriorate through age, heat exposure and prolonged contact with moisture. Renewing damaged or obstructed hoses restores the intended water path and helps reduce pooling in corrosion-prone areas. Check the adjoining funnels, T-piece, clamps and connection points during installation, replacing worn supporting items where necessary.

FAQs

• What is this kit used for? It replaces water drain hoses serving the Porsche 914 rain-tray or fresh-air box drainage system.
• How many kits are required? One kit is required per drainage application.
• Should related fittings be inspected? Yes. Examine the hose clamps, funnels, grommets, T-piece and adjoining seals for wear, damage or blockage while the system is accessible.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG57190000

The product you are viewing cross references to these numbers