Boots / Rear Lid / Locks and Latches

RSR Engine lid hinge. Made from high quality stainless steel with stainless fixings.
Replacement for 91151203500, 90151203620GRV.

Sold as a pair.

Fits:
Porsche 911 2.0L-3.3L 01/1963-07/1989

Diagram ref no 2 and 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151203699

The product you are viewing cross references to these numbers

Billet rear decklid hinges - Adjustable.

Fits:
EARLY Porsche 1965-1989 911/912/930

Tired of inserting shims to line up your rear decklid? Us too. Now easily adjust your decklid to the correct position in minutes with these Rennline 2 Piece Billet Rear Decklid Hinges. Built for quick and painless setup, these hinges allow for microadjustments to ensure smooth operation of the rear decklid. Machined from billet aircraft grade aluminum and clear anodized, they come with all necessary hardware including cnc machined brass bushings.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E194.XXXEARLY

The product you are viewing cross references to these numbers

Billet Rear Decklid Hinges - Adjustable.

Porsche Early 911 with 964 decklid

Tired of inserting shims to line up your rear decklid? Us too. Now easily adjust your decklid to the correct position in minutes with these Rennline 2 Piece Billet Rear Decklid Hinges. Built for quick and painless setup, these hinges allow for microadjustments to ensure smooth operation of the rear decklid. Machined from billet aircraft grade aluminum and clear anodized, they come with all necessary hardware including cnc machined brass bushings. Designed for early 911 with 964 decklid.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E198

The product you are viewing cross references to these numbers

Bolt for engine lid hinges.

Fits:
Porsche 911 2.0-3.3 01/63-07/89
Porsche 912 1.6 01/65-02/70

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151247120

The product you are viewing cross references to these numbers

Bolt for engine lid hinges.

Fits:
Porsche 911 2.0-3.3 01/63-07/89
Porsche 912 1.6 01/65-02/70

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151247120

The product you are viewing cross references to these numbers

Catch For Rear Lid Lower Part.
The OE Match Catch for Rear Lid Lower Part is a high-quality replacement locking and retention component designed to securely latch the rear engine lid or rear deck lid in the closed position. Manufactured to OE specifications for fit, strength and durability, this catch forms an essential part of the rear lid locking mechanism, helping ensure safe and reliable operation.  

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93  

Diagram Ref No 7A

Constructed from robust materials and engineered to withstand repeated use, vibration and exposure to the elements, the rear lid catch provides precise engagement with the corresponding latch assembly. It helps maintain correct panel alignment while preventing unwanted movement of the rear lid during vehicle operation.  

What This Product Does:

• Secures the rear lid in the closed position.
• Forms part of the rear lid locking and latching mechanism.
• Prevents accidental opening of the rear lid while driving.
• Maintains proper panel alignment and fitment.
• Reduces vibration and movement of the rear lid.
• Supports safe access to the engine or luggage compartment.
• Contributes to overall vehicle safety and body integrity.

Symptoms Of Wear Or Failure:

• Difficulty closing or latching the rear lid.
• Rear lid requiring excessive force to secure.
• Loose or rattling rear lid while driving.
• Misalignment between the lid and bodywork.
• Inconsistent latch engagement.
• Visible wear, corrosion or damage to the catch mechanism.
• Rear lid releasing unexpectedly.
• Excessive movement of the rear lid when closed.
• Failure of the locking mechanism to retain the lid securely.

Why Replacement Matters:

• The rear lid catch is subjected to continual use, vibration, weather exposure and mechanical loading throughout its service life. Over time, wear of the engagement surfaces, corrosion or physical damage can reduce its ability to securely retain the rear lid.
• A worn or faulty catch can compromise the security and alignment of the rear lid, potentially causing rattles, panel movement or difficulty accessing the compartment. In severe cases, inadequate latching may allow the lid to open unexpectedly, creating a significant safety hazard and increasing the risk of damage to the vehicle.
• Replacing a worn rear lid catch restores proper latch operation, ensures secure panel retention and helps maintain correct body panel alignment. An OE Match replacement provides factory-style fitment, durable construction and dependable long-term performance, helping preserve the safety, functionality and originality of your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151205201

The product you are viewing cross references to these numbers

Catch for rear lid.

Fits:
Porsche 911 1965-89
Porsche 930 3.0L / 3.3L 1975-89
Porsche 964 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 7A

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151205201

The product you are viewing cross references to these numbers

Catch pin for rear lid upper part.

Fits:
Porsche 911 1965 - 1989
Porsche 930 Turbo 3.0L / 3.3L 1975 - 1989
Porsche 964 1989 - 1994

Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93051205201

The product you are viewing cross references to these numbers

Catch pin for rear lid.

Fits:
Porsche 911 1965-89
Porsche 930 Turbo 3.0L / 3.3L 1975-89
Porsche 964 1989-94

Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93051205201

The product you are viewing cross references to these numbers

Engine lid aluminum.
Weight is only 2kg.
Without holes for license plate lights.

Fits:
Porsche 911 1973-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151201000

The product you are viewing cross references to these numbers

Engine lid grille Pad. Located beneath the engine lid ventilation grille. 6 required - priced each.

Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155915101

The product you are viewing cross references to these numbers

Guide tube for engine lid release cable.

Fits:
Porsche 911 2.0-3.3 01/1963 - 07/1989

Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150248300

The product you are viewing cross references to these numbers

Hammerhead bolt for plastic rear lid grille. For vehicles with air conditioning.
6 per grille. Sold each.

Fits:
Only for vehicles with air conditioning.
Porsche 911 (1978 - 1989)
Porsche 911 Turbo (1978 - 1988)
Porsche 959 (1987 - 1988)

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155943301

The product you are viewing cross references to these numbers

Handle For Bonnet And Engine Lid Cable.
Restore the original operation of your classic Porsche's front bonnet or rear engine lid release with this OE Match Handle for Bonnet and Engine Lid Cable. Manufactured as a direct replacement for 90155281320/1, this handle is designed to operate the bonnet or engine lid release cable, allowing safe and convenient access for routine maintenance, inspections, and repairs.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94  

Manufactured to OE-style specifications, this replacement handle offers the correct appearance, fit, and functionality for classic Porsche restoration and maintenance. It is an ideal solution for replacing a damaged, worn, missing, or broken original release handle.  

What This Product Does:

• Operates the bonnet or engine lid release cable.
• Allows quick and reliable access to the luggage compartment or engine bay.
• Provides a comfortable grip for opening the release mechanism.
• Transfers pulling force to the release cable without excessive flexing.
• Restores the original appearance and operation of the release system.
• Replaces a damaged, worn, or missing original handle.

Symptoms Of Wear Or Failure:

• Cracks or breaks in the handle.
• A loose or wobbly handle.
• Difficulty pulling the bonnet or engine lid release.
• The handle slipping or failing to operate the release cable.
• Excessive wear from repeated use.
• Broken or damaged mounting points.
• A missing release handle.
• Visible deterioration affecting appearance.
• Increased force required to open the bonnet or engine lid.
• The handle separating from the release cable mechanism.

Why Replacement Matters:

• A damaged bonnet or engine lid release handle can make accessing essential service areas difficult and may eventually prevent the release mechanism from operating altogether. This can complicate routine maintenance, emergency repairs, and regular vehicle inspections.
• Replacing a worn handle restores reliable operation of the release mechanism, improves user confidence, and helps prevent unnecessary strain on the release cable and latch assembly. It also restores the original appearance of the vehicle's interior and is an important finishing detail during restoration of a classic Porsche.
• Installing a quality OE Match replacement helps ensure dependable operation while maintaining the authentic factory look and feel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155281320

The product you are viewing cross references to these numbers

Lid Release Cable Handle. 

The Genuine Porsche Lid Release Cable Handle (Part Number: 90155281320) is an original equipment interior operating component designed for selected classic Porsche models, including the Porsche 911, 912, 914, 930 Turbo, 964 and 968.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94  

Diagram Ref No 28

Also referred to as a bonnet release handle, engine lid release handle or cable pull handle, this component provides the manual grip used to operate the relevant lid release cable.

Depending on the vehicle and installation position, the handle allows the driver to release the front luggage compartment lid, rear engine lid or rear hatch.

The handle forms part of a mechanical release system consisting of a pull cable, cable guide, latch and associated mounting components.

When the handle is pulled, the applied force is transferred through the release cable to the corresponding latch mechanism. This disengages the latch and allows the lid to be opened.

Manufactured to Porsche's original equipment specification, the Genuine Porsche handle is intended to maintain the correct operation and appearance of the original release assembly.

Although relatively small, this component plays an important role in providing convenient access to essential areas of the vehicle.

On classic Porsche 911 models, the front luggage compartment houses components such as the fuel tank, spare wheel and other service-related equipment, while the rear engine lid provides access to the engine compartment.

A reliable release handle is therefore important for routine maintenance, vehicle inspections and mechanical servicing.

Over time, the original handle may deteriorate through repeated use, ageing, mechanical stress or excessive pulling force.

Cracks, broken attachment points or damage around the cable connection may prevent the handle from operating the release mechanism correctly.

A damaged handle may feel loose, become difficult to grip or separate from the cable assembly.

Replacing a worn or broken release handle with a Genuine Porsche component helps restore dependable operation of the corresponding lid release system while preserving the original interior appearance.

Ideal for classic Porsche maintenance, bonnet and engine lid repairs, interior refurbishment and restoration projects, this Genuine Porsche Lid Release Cable Handle provides a factory-specified replacement for compatible applications.

What This Product Does:
The lid release cable handle is the manually operated component of the bonnet, engine lid or rear hatch release mechanism.

Its primary function is to allow the driver to pull the release cable and disengage the corresponding latch.

When the handle is pulled, the movement creates tension in the attached cable.

This tension is transmitted to the latch mechanism, allowing the relevant bonnet or lid to be released.

The handle must remain securely connected to the cable and provide sufficient grip for reliable operation.

Its main functions include:

• Operating the release cable: Transfers pulling force from the handle to the mechanical cable.
• Releasing the front bonnet: Allows access to the front luggage compartment on applicable models.
• Releasing the rear engine lid: Provides access to the engine compartment on applicable models.
• Operating the rear hatch release: Performs the corresponding release function on selected Porsche 968 applications.
• Providing a secure grip: Allows the release mechanism to be operated conveniently.
• Supporting reliable latch operation: Helps the cable receive the movement required to disengage the latch.
• Maintaining original functionality: Preserves the factory-designed mechanical release arrangement.
• Reducing unnecessary cable strain: Provides the intended pulling point when the cable and latch operate freely.
• Supporting routine maintenance: Allows access to the relevant vehicle compartment.
• Preserving interior originality: Maintains the appearance and operation of the original Porsche release control.

Symptoms Of Wear Or Failure:
The lid release handle is subjected to repeated pulling forces during normal vehicle use.

Ageing, mechanical damage or excessive resistance within the release mechanism may cause the handle to deteriorate.

Common symptoms and signs of a worn or damaged release handle include:

• Cracked handle: Visible cracks may develop around the grip or cable attachment area.
• Broken handle: The handle may fracture completely and become unusable.
• Loose or wobbly operation: A damaged attachment may allow excessive movement.
• Handle separating from the cable: The release handle may no longer remain securely connected.
• Difficulty pulling the handle: The grip may be damaged or difficult to operate.
• Handle slipping during operation: A worn connection may prevent force from being transferred reliably.
• Excessive free movement: The handle may move without operating the release cable.
• Damaged mounting points: Cracked or broken retaining features may affect installation.
• Visible deformation: Excessive pulling force may distort the handle.
• Loose retaining hardware: Damaged or missing fixing components may affect handle security.
• Intermittent lid release: The lid may release inconsistently if the handle-to-cable connection is defective.
• Complete failure to release the lid: A broken handle may prevent normal operation.
• Missing handle: The cable may remain exposed without its intended operating grip.
• Visible ageing: Surface deterioration may affect the handle's appearance or condition.
• Damage during servicing: Incorrect removal or excessive force may damage the original component.

Why Replacement Matters:
Replacing a defective release handle helps maintain reliable access to the vehicle's front luggage compartment, engine bay or rear hatch.

A cracked or loose handle may no longer provide sufficient grip or transfer the pulling force required to operate the release cable.

If the handle fails completely, the corresponding lid may become difficult to open using the normal release mechanism.

This can complicate routine maintenance and make it harder to access components requiring inspection or repair.

Installing a Genuine Porsche replacement Lid Release Cable Handle helps to:

• Restore reliable lid release operation: Replace a broken or worn operating handle.
• Maintain convenient compartment access: Allow the relevant bonnet, engine lid or hatch to be opened normally.
• Provide a secure grip: Restore the intended manual pulling point.
• Maintain correct cable operation: Support effective transfer of force to the release cable.
• Replace damaged attachment points: Renew a handle that no longer connects securely.
• Reduce the risk of complete handle failure: Replace cracked or weakened material before it breaks.
• Improve ease of use: Restore normal operation where the defective handle caused difficulty.
• Support routine maintenance: Maintain access for engine, luggage compartment or related vehicle servicing.
• Preserve original interior appearance: Replace an aged or damaged component with a factory-specified part.
• Support bonnet and latch repairs: Provide a replacement handle during release mechanism refurbishment.
• Maintain classic Porsche originality: Preserve the original control arrangement.
• Support long-term reliability: Restore a sound mechanical connection within the release system.
• Maintain Genuine Porsche quality: Use the corresponding original equipment component.

Replacement is particularly recommended when the handle is cracked, broken, loose, missing or unable to operate the cable reliably.

If the release cable or latch is seized or excessively stiff, those components must also be repaired. Replacing the handle alone will not correct excessive resistance elsewhere in the system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155281320

The product you are viewing cross references to these numbers