Cabrio

Convertible top frame lever screw bearing sleeve.

Fit:
Porsche 944 1989-91 Cabrio
Porsche 968 1992-95 Cabrio

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99992402800

The product you are viewing cross references to these numbers

Grub screw M8 x 20  cabriolet roof. 
Sold each

Fits:
Porsche 911 - 1978 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 944 S2 / turbo - 1989 to 1991
Porsche  968 - 1992 to 1995

Click 'Zoom in' for large parts diagram.
Diagram ref no 26

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156141801

The product you are viewing cross references to these numbers

This genuine Porsche locating peg, also known as a locating pin, is used within the convertible top frame.

Fits

• Porsche 968 1992-95  CABRIO 
• Porsche 944 1989-91 CABRIO 
  
  Check fitment for your specific vehicle (model, year, engine) before ordering.
  
  

Diagram: Convertible top frame, ref no 25

What This Product Does

The pin provides a defined locating point in the folding roof-frame mechanism, helping the adjoining frame parts sit in their intended position during roof movement.

Functions

• Locates associated convertible roof-frame parts
• Helps maintain the intended alignment of the folding mechanism
• Replaces a missing, worn or damaged original pin
  
  

Technical Details

• Part number: 94156521410
• Component description: Locating peg / locating pin
• Assembly: Convertible top frame
• Body style: Cabriolet
• Quantity shown per assembly: 2
  
  

Symptoms of Fault

• Visible scoring, deformation or other damage to the peg
• Unwanted movement at the corresponding roof-frame joint
• Poor alignment between adjacent folding frame components
• Clicking, rattling or irregular movement as the roof operates
• A locating pin missing from the assembly
  
  

Why Replacement Matters

Renewing a defective or absent locating peg helps return the connected roof-frame parts to their specified position. Inspect the surrounding pivots, supports, catches and fixings at the same time, as wear elsewhere in the mechanism may also cause looseness or misalignment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94156521410

The product you are viewing cross references to these numbers

Main folding bow spacer plate 1mm.

Fits:
Porsche 911 1978-89
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 41.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156142301

The product you are viewing cross references to these numbers

Main folding bow spacer plate 2mm.

Fits:
Porsche 911 1978-89
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 41.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156142300

The product you are viewing cross references to these numbers

Side section outside, upper left, at rear lining.

Fits:
Porsche 944/2 Cabriolet (1989 to 1991)
Porsche 968 Cabriolet (1992 to 1995)

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94150362510

The product you are viewing cross references to these numbers

Side section outside, upper right, at rear lining.

Fits:
Porsche 944/2 Cabriolet (1989 to 1991)
Porsche 968 Cabriolet (1992 to 1995)

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94150362610

The product you are viewing cross references to these numbers

Porsche sound absorber for either Left, Centre or Right on CABRIO, please confirm position before ordering. 

Fits

• Porsche 944 CABRIO 1989-91
• Porsche 968 CABRIO 1992-95
  
  Check fitment for your specific vehicle (model, year, engine) before ordering.
  
  Diagram ref no 26 (right), 27 (centre) 25 (left)
  
  What This Product Does

These components form part of the vehicle’s Rear Hood sound insulation. 

Functions

• Provides sound absorption within the interior insulation assembly.
• Replaces the centre, left or right component during an insulation refurbishment.
  
  Technical Details

• Brand: Porsche.
• Part numbers: 94155631711 (Centre),  94155631511 (Left),  94155631611 (Right).
• Diagram description: Rear Hood sound absorber. Left/Centre/Right
• Diagram model designation: CABRIO.
• Quantity shown in the diagram: 1.
  
  Symptoms of Fault

Inspect the existing insulation for deterioration or moisture damage when interior trim is removed. Interior noise can have several causes, so check nearby trim and fixings rather than assuming this absorber is responsible.

Why Replacement Matters

Renewing damaged insulation supports restoration of the original interior assembly. Matching the part number and body-style designation helps avoid fitting an unsuitable component during refurbishment.

FAQs

Does model year matter?
Yes. Confirm the vehicle’s year, body style and part number, including the CABRIO note recorded in the diagram.

What should be checked during fitting?
Inspect adjacent trim and its fixings. Use suitable trim-removal tools and address any moisture source before reassembly.

Check fitment for your specific vehicle (model, year, engine) before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94155631

The product you are viewing cross references to these numbers

Tenax Fasteners, Stud, Black.
Size: 4.2mm x 10mm
Finish: Black Chrome Plated Brass/Steel

Fits:
Porsche 911 1978 - 1989 CABRIO
Porsche 964 1989 - 1994 CABRIO

Diagram ref no 35

Position: Body mounting point for convertible top or tonneau cover Tenax fasteners
Sold as: Individual fastener stud, 6 required per vehicle

The Tenax fastener stud acts as the fixed mounting point for Tenax snap fasteners used on convertible top covers or protective tonneau covers. When paired with the matching Tenax cap, it creates a secure locking system that holds fabric covers firmly in place while still allowing quick removal when needed.

Replacing worn or damaged studs restores the proper attachment points for convertible covers and helps maintain the original functionality and appearance of the vehicle’s roof system.

Function
• Convertible Cover Mounting: Provides anchor point for Tenax snap fasteners
• Secure Fastening: Keeps tonneau or roof covers firmly attached to the body
• Quick Release Design: Allows easy removal of covers when required
• Durability: Chrome-plated brass/steel construction resists corrosion and wear

Tenax studs are exposed to weather, repeated use and vibration. Over time they may corrode, loosen or become damaged, which can prevent convertible covers from fastening securely. Installing a new OE Match stud restores the original fastening system and ensures that covers remain securely attached while preserving the classic Porsche appearance.

Replace the Tenax fastener if you notice:
•   Loose or missing convertible cover fasteners
•   Corrosion or damage to the stud
•   Difficulty attaching Tenax caps
•   During convertible top or tonneau cover restoration

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959159702

The product you are viewing cross references to these numbers

Tenax fasteners, stud, Chrome.
Size: 4.2mm x 10mm
Finish: Chrome Plated Brass/Steel

Fits:
Porsche 911 1978 - 1989 CABRIO
Porsche 964 1989 - 1994 CABRIO

Diagram ref no 35

Position: Body mounting point for convertible top or tonneau cover Tenax fasteners
Sold as: Individual fastener stud, 6 required per vehicle

The Tenax fastener stud acts as the fixed mounting point for Tenax snap fasteners used on convertible top covers or protective tonneau covers. When paired with the matching Tenax cap, it creates a secure locking system that holds fabric covers firmly in place while still allowing quick removal when needed.

Replacing worn or damaged studs restores the proper attachment points for convertible covers and helps maintain the original functionality and appearance of the vehicle’s roof system.

Function
• Convertible Cover Mounting: Provides anchor point for Tenax snap fasteners
• Secure Fastening: Keeps tonneau or roof covers firmly attached to the body
• Quick Release Design: Allows easy removal of covers when required
• Durability: Chrome-plated brass/steel construction resists corrosion and wear

Tenax studs are exposed to weather, repeated use and vibration. Over time they may corrode, loosen or become damaged, which can prevent convertible covers from fastening securely. Installing a new OE Match stud restores the original fastening system and ensures that covers remain securely attached while preserving the classic Porsche appearance.

Replace the Tenax fastener if you notice:
•   Loose or missing convertible cover fasteners
•   Corrosion or damage to the stud
•   Difficulty attaching Tenax caps
•   During convertible top or tonneau cover restoration

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959159702

The product you are viewing cross references to these numbers