Wishbones & bushes

Lower wishbone ball joint rebuild kit.
Kit for both arms - 1 kit required per car



Fits
Porsche 944 - 1985/2 to 1991 - Aluminium lower arms
Porsche 968 - 1992 to 1995


Rebuild Your Worn Ball Joints

This kit allows replacement of the ball joints on Porsche 944 cars with aluminium lower control arms.

You can easily replace the aluminium control arm ball joints with units that are better than those that the car was delivered with.
No special tools required and no machine work is necessary.

Kit includes solid aluminium bronze internal bushings, forged chromolly ball pins and lower plates with grease fittings.
One kit will replace the ball joints on both control arms.

Feb 1985 to 1995 944 cars with aluminium lower arms

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1-RB944

The product you are viewing cross references to these numbers

Since the 1985 ½ model year, 944s have used aluminium control arms which use ball joints that can not be replaced, as least not by the home mechanic. Early 944s are equipped with steel control arms which use replaceable ball joints.



The big question that most owners have about control arm ball joints is "how do I know when my ball joints need replacing?" Most often you'll hear it said that if the boot is torn or cracked, the control arm needs to be replaced. While this isn't a great indicator, it should raise suspicion as to the condition of the ball joint. Other indicators are knocking sounds in the front suspension or noticeable play in the control arm. The play can be checked by pushing up on the control arm (toward the spindle) near the ball joint. Noticeable play between the control arm and the ball joint indicates that the control arm needs to be replaced.


Fits:
Porsche 944 1985-91
Porsche 968 1992-95

For more information about this product CLICK HERE

Fitting Instructions CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95134100000

The product you are viewing cross references to these numbers

Rennline Mono ball (Fast road & track) Front Control Arm Bushing (Rear Position)
One kit includes 2 bushings, (1 car set)

Fit:
Porsche 911/912/930 All - 1969-89

Wishbone air deflector. Porsche 944 S2 / 944 Turbo



Fits:
Porsche 944 Turbo 1985-88
Porsche 944 S2 1989-91

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95134159000

The product you are viewing cross references to these numbers

Wishbone clamp mount bracket.



Fits:
Porsche 924 (1976 - 1985)
Porsche 924 S (1986 - 1988)
Porsche 924 Turbo (1979 - 1982)
Porsche 944 (1982 - 1985)

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477407169

The product you are viewing cross references to these numbers

 

Recondition Wishbone Eccentric bolt Front. Porsche 944 1987-91 / 968 1992-95 

Fits:

• Porsche 944 1987-91 (not Turbo S) Cars without sport suspension
• Porsche 968 1992-95

Please note:
Reconditioned products are sold on an exchange basis, A surcharge will be held and then refunded when the old one is returned.

The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer. 

Surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer. Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning. All surcharges and exchanges are subject to our terms and conditions.       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95134143103

The product you are viewing cross references to these numbers

Wishbone Front Bush, Fits In The Rear.
The OE Match Wishbone Front Bush, Fits in the Rear, is a high-quality replacement suspension bushing designed to provide a secure yet flexible connection between the wishbone (control arm) and the vehicle chassis. Manufactured to OE specifications for fit, durability and performance, this bonded rubber bush helps absorb road shocks, reduce vibration and maintain precise suspension geometry.  
Sold Each.
x2 Required Per Car.

Fits:

• Porsche 944 2.5L 8V 1982-87
• Porsche 944 2.7L 8V 1988-89
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944S2 3.0L 16V 1989-91
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988  

Installed in the rear mounting position of the wishbone, this bush plays a critical role in controlling suspension movement while allowing the necessary articulation of the control arm during driving. Constructed from high-quality rubber and metal components, it is engineered to withstand continuous suspension loads, road impacts and environmental exposure while maintaining ride comfort and handling precision.  

What This Product Does:

• Connects the wishbone (control arm) to the vehicle chassis.
• Allows controlled suspension movement and articulation.
• Absorbs road shocks and vibration.
• Maintains correct suspension geometry and wheel alignment.
• Reduces noise, vibration and harshness (NVH).
• Supports stable braking, steering and cornering performance.
• Helps ensure predictable vehicle handling characteristics.
• Protects surrounding suspension components from excessive stress.

Symptoms Of Wear Or Failure:

• Clunking or knocking noises from the suspension.
• Excessive movement within the control arm assembly.
• Vague or imprecise steering feel.
• Uneven or accelerated tyre wear.
• Poor wheel alignment.
• Vehicle wandering or pulling during driving.
• Reduced stability under braking or cornering.
• Increased vibration transmitted into the cabin.
• Visible cracking, splitting or deterioration of the rubber bush.
• Excessive suspension play detected during inspection.

Why Replacement Matters:

• Suspension bushes are subjected to constant movement, road impacts, vibration, temperature fluctuations and environmental contaminants. Over time, the rubber material can harden, crack, deform or separate from its metal housing, reducing its ability to control suspension movement effectively.
• A worn wishbone bush can allow excessive suspension movement, negatively affecting steering precision, braking stability and tyre wear. If left unresolved, additional strain may be placed on ball joints, control arms, tyres and other suspension components, potentially leading to more extensive repairs.
• Replacing a worn wishbone bush restores proper suspension geometry, improves ride quality and enhances vehicle handling. An OE Match replacement provides factory-style fitment, reliable vibration isolation and long-term durability, helping maintain the comfort, safety and performance characteristics expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95134104101

The product you are viewing cross references to these numbers

Wishbone front rubber mounting washer 10,5



Fits:
Porsche 968 1992-95
Porsche 944 S2 1989-91

Click 'Zoom in' for large parts diagram.
Diagram Ref No 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9990252210C

The product you are viewing cross references to these numbers

Wishbone front. Fits left and right side.



Fits:
Porsche 924 1982-85
Porsche 924S 1986-88
Porsche 944 1982-85

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

171407153D

The product you are viewing cross references to these numbers

Wishbone front. 



Fits:
Porsche 944 1984-86

* The numbers stamped on the product will show:
LEFT 95134114901
RIGHT 95134115001
These are casting numbers and not the part number.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95134102

The product you are viewing cross references to these numbers

Exchange wishbone front. *Reconditioned

Fits:
Porsche 944 1984-86

* The numbers stamped on the product will show:
LEFT 95134114910
RIGHT 95134115010
These are casting numbers and not the part number.

Please note:
Reconditioned products are sold on an exchange basis, A surcharge will be held and then refunded when the old one is returned.

The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer. 

Surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer. Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning. All surcharges and exchanges are subject to our terms and conditions.       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95134102

The product you are viewing cross references to these numbers

Front Lower Wishbone 

Restore the precision handling and balanced driving dynamics of your Porsche 944 with this OE Match Front Lower Wishbone, suitable for Porsche 944 models produced between 1984 and 1986. This critical suspension component helps maintain correct wheel alignment, steering response and suspension geometry, ensuring the vehicle performs as Porsche intended.

Fits:

• Porsche 944 2.5L 8V 1982-86

Diagram ref no 2

Manufactured to OE specifications, this replacement lower wishbone provides the correct fit, strength and durability required for both everyday driving and enthusiastic road use. Whether you're rebuilding the front suspension, correcting handling issues or carrying out a full restoration, replacing worn suspension components is essential for maintaining safety and performance.

What Does the Front Lower Wishbone Do?

The front lower wishbone, also known as a control arm, forms a key part of the Porsche 944 front suspension system. It connects the wheel hub assembly to the chassis and controls the movement of the front wheels as the suspension travels over varying road surfaces.

Working together with the suspension bushes, ball joints, dampers and steering components, the lower wishbone helps:

• Maintain accurate suspension geometry.
• Keep the wheels correctly aligned.
• Improve steering precision and driver feedback.
• Support vehicle stability during braking and cornering.
• Control suspension movement and wheel travel.
• Deliver predictable handling characteristics.

The Porsche 944 is renowned for its balanced chassis and precise handling, making properly functioning suspension arms vital to preserving the driving experience.

Why Do Front Lower Wishbones Fail?

Although the wishbone itself is designed to be durable, years of use, road impacts and environmental exposure can eventually lead to wear or damage.

Common causes of failure include:

• Corrosion caused by moisture and road contaminants.
• Damage from potholes, kerb strikes or road debris.
• Metal fatigue after decades of suspension loading.
• Distortion following accidents or heavy impacts.
• Wear around mounting points and bush housings.
• Excessive stress caused by worn suspension bushes or ball joints.

As Porsche 944 models continue to age, many original suspension components may have experienced decades of service and can benefit from replacement during restoration or maintenance work.

When Should a Front Lower Wishbone Be Replaced?

The front lower wishbone should be inspected whenever suspension work is performed. Replacement may be necessary if you experience:

Excessive play in the suspension. Clunking or knocking noises from the front end. Uneven tyre wear. Poor steering response. Vehicle wandering or pulling under braking. Alignment issues that cannot be corrected. Visible corrosion, cracking or physical damage. During a complete front suspension overhaul.

Replacing worn suspension arms helps restore factory handling characteristics, improve steering accuracy and enhance overall driving confidence.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95134102

The product you are viewing cross references to these numbers

PowerFlex PFF85-211 Wishbone Inner Bush Front
PAIR



OEM Part Number: 171407182D

Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85

Click 'Zoom in' for large parts diagram.
Diagram Ref No 7.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF85-211

The product you are viewing cross references to these numbers

Powerflex Black Series Wishbone Inner Bush Front
PAIR

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85

Diagram Ref No 7.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF85-211BLK

The product you are viewing cross references to these numbers

PowerFlex PFF85-211 Wishbone Inner Bush Front
Sold as a pair (both arms)



OEM Part Number: 171407182

Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85

Click 'Zoom in' for large parts diagram.
Diagram Ref No 7.

Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF85-211H

The product you are viewing cross references to these numbers

Wishbone inner bush rear. 



Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85

Click 'zoom in' for large parts diagram.
Diagram Ref No 11.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477407181B

The product you are viewing cross references to these numbers