Shock Absorber Parts REAR

Shock Absorber Rubber Mount.
REAR

Fits:
Porsche 964 up to >>1990
Porsche 928 1978-95

Click 'Zoom in' for large parts diagram.
Diagram ref no 6.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833351810

The product you are viewing cross references to these numbers

Shock Absorber Rubber Mount - Rear
Sold each – 2 required per car

The OE Match Rear Shock Absorber Rubber Mount is a replacement suspension component designed to cushion the rear shock absorber mounting assembly.

Fits:

• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 928 4.5L 1978-82
• Porsche 928S 4.7L 1981-83
• Porsche 928S2 4.7L 1984-86
• Porsche 928S4 5.0L 1987-92
• Porsche 928GT 5.0L 1989-91
• Porsche 928GTS 5.4L 1992-95

Diagram ref no 6

It helps isolate vibration and absorb minor movement between the shock absorber and its mounting point, supporting smooth and controlled suspension operation.

ordering.

What Does It Do?

The rubber mount cushions the shock absorber connection, helping reduce vibration, noise and unwanted movement transmitted through the suspension.

Why Does It Fail?

Common causes include:

• Rubber hardening with age
• Cracking or splitting
• Repeated suspension movement
• Exposure to moisture and road contamination
• Compression and loss of elasticity

When Should It Be Replaced?

Replace if the rubber is cracked, compressed, deteriorated or no longer supports the shock absorber correctly.

Inspection is recommended during shock absorber replacement or rear suspension servicing.

Checks & Diagnosis

Inspect the mount for cracking, distortion and excessive movement.

Knocking noises, vibration or looseness around the rear shock absorber mounting area may indicate worn components requiring investigation.

Key Features

• OE Match replacement rubber mount
• Suitable for applicable Porsche 964 and 928 models
• Helps reduce suspension vibration and noise
• Cushions the rear shock absorber mounting point
• Ideal for suspension servicing and restoration

Porsche 964 & 928 Rear Shock Absorber Mounts and Suspension Parts

Rear shock absorber rubber mounts help isolate vibration and maintain secure, cushioned connections within the suspension assembly.

Replacing deteriorated mounts can reduce unwanted noise and restore proper support around the shock absorber mounting points.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833351810

The product you are viewing cross references to these numbers

Shock absorber rubber stop (additional spring), Rear.

Fits:

Porsche 964 Carrera 1991>>
Porsche 964 Turbo 1991>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433310500

The product you are viewing cross references to these numbers

Shock absorber strut mounting, rear.


Porsche 964 1991>> (not Carrera RS)

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433305900

The product you are viewing cross references to these numbers

Shock absorber strut mounting, rear.
This mount is designed to provide correct bearing support, mounting geometry, and durable rubber/metal construction for the rear suspension strut assembly. According to parts listings, it fits the rear upper shock mount position.


Porsche 964 1991>> (not Carrera RS)

Diagram ref no 10

•  Direct-fit replacement matching OEM dimensions and mounting points.
•  Built for the load and motion characteristics of the rear suspension—ensuring accurate alignment and ride stability.
•  Application: Rear suspension mount, strut/upper shock mount, Porsche 964 models.

The rear strut mount is subjected to road loads, suspension articulation, vibrations and bearing wear. When the mount becomes worn or the bearing fails, you may experience clunking, excessive movement, misalignment of the rear suspension, or compromised ride quality. Replacing this mount restores proper mounting integrity, correct wheel alignment and helps maintain the factory ride & handling characteristics.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433305900

The product you are viewing cross references to these numbers

Shock absorber strut mounting. REAR

Fits:
Porsche 964 >>1990

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433306404

The product you are viewing cross references to these numbers

Shock Absorber Strut Mounting, REAR.

The OE MATCH Rear Shock Absorber Strut Mounting is a high-quality replacement suspension component designed for early Porsche 911 (964) Carrera 2 and Carrera 4 models up to 1990.

Fits:

• Porsche 964 >>1990

Diagram Ref No 10

Manufactured to provide OE-style fitment and reliable functionality, this rear shock absorber mounting forms an essential connection between the rear shock absorber assembly and the vehicle's chassis, helping maintain correct suspension positioning and stability.

Also known as a rear shock absorber top mount or rear strut mounting, this component helps support the rear damper assembly and manage the forces generated during suspension movement.

The mounting works alongside the associated rubber inserts, washers, thrust rings and retaining hardware to provide a secure connection between the shock absorber and vehicle body.

Over time, repeated suspension movement, road impacts, vibration and exposure to moisture can cause the original mounting and surrounding components to deteriorate, potentially resulting in unwanted suspension noise, excessive movement and reduced handling precision.

Ideal for replacing worn, corroded, damaged or deteriorated original mounts, the OE MATCH Rear Shock Absorber Strut Mounting provides a practical replacement solution for suspension servicing, rear shock absorber replacement and classic Porsche restoration projects.

What This Product Does:
The rear shock absorber strut mounting secures the upper section of the rear shock absorber assembly to the vehicle chassis.

It provides a stable mounting point that allows the shock absorber to control suspension movement effectively while helping maintain the intended rear suspension configuration.

Its key functions include:

• Secure Shock Absorber Mounting: Provides a secure upper mounting point for the rear shock absorber assembly.
• Suspension Stability: Helps maintain correct shock absorber positioning during suspension movement.
• Load Transfer: Transfers forces generated by the rear shock absorber into the designated chassis mounting structure.
• Vibration Control: Works with associated rubber mounting components to help reduce vibration transmitted into the vehicle body.
• Noise Reduction: A correctly functioning mounting assembly helps minimise unwanted knocking, rattling and suspension noises.
• Shock Absorber Alignment: Helps maintain correct damper positioning within the rear suspension assembly.
• Consistent Suspension Operation: Supports the shock absorber's ability to control wheel and body movement.
• Handling Precision: Contributes to stable and predictable rear suspension behaviour during cornering and uneven road conditions.
• Component Support: Helps prevent excessive movement that could place additional stress on the shock absorber and associated hardware.
• OE-Style Fitment: Maintains the original rear suspension mounting arrangement without requiring modification.

Symptoms Of Wear Or Failure:
Over time, continuous suspension loading, vibration, corrosion and general ageing can cause rear shock absorber strut mountings and their associated components to deteriorate.

Common signs include:

• Knocking or Clunking Noises: Worn or loose mounting components may produce knocking sounds from the rear suspension when driving over bumps or uneven road surfaces.
• Rattling from the Rear Suspension: Excessive movement within the mounting assembly can cause metallic rattling or vibration-related noises.
• Loose Shock Absorber Mounting: Worn retaining components or damaged mounting points may allow unwanted movement of the rear shock absorber.
• Visible Corrosion: Rust or corrosion around the mounting and associated hardware may indicate deterioration.
• Cracked or Damaged Mounting: Physical cracks, distortion or structural damage can compromise the security of the shock absorber connection.
• Deteriorated Rubber Inserts: Ageing rubber components associated with the mounting assembly may harden, crack or lose their ability to absorb vibration.
• Excessive Suspension Movement: A severely worn mounting assembly may allow abnormal movement of the rear shock absorber.
• Harsh Impacts Over Bumps: Damaged mounting inserts or associated suspension components may increase the transmission of vibration and impact forces into the body.
• Unsettled Rear Handling: Excessive play within the mounting assembly may contribute to less predictable rear suspension behaviour.
• Poor Shock Absorber Positioning: Damaged or incorrectly fitted mounting components may affect the alignment and operation of the rear damper.
• Premature Shock Absorber Wear: Excessive movement or incorrect mounting support may place additional stress on the damper and associated components.
• Visible Movement at the Mounting Point: Abnormal movement during suspension inspection may indicate worn or damaged mounting hardware.

Why Replacement Matters:

• Replacing a worn or damaged rear shock absorber strut mounting is an important part of maintaining the suspension stability, handling precision and driving comfort of your Porsche 964.
• The rear shock absorbers control suspension movement and help maintain stable contact between the tyres and road surface. Their mounting points must remain secure to allow the dampers to operate as intended.
• When a rear strut mounting becomes damaged, corroded or loose, excessive movement can develop within the suspension assembly. This may result in knocking noises, increased vibration and inconsistent suspension behaviour.
• A correctly fitted replacement mounting helps restore secure shock absorber positioning, supporting effective damping and predictable rear suspension response.
• Damaged mountings may also place additional stress on surrounding suspension components, including the shock absorber shaft, retaining hardware and associated rubber inserts.
• Continued operation with a severely deteriorated mounting can contribute to premature component wear and potentially more extensive suspension repairs.
• Replacing ageing strut mountings during rear shock absorber servicing is particularly beneficial, as it avoids reusing weakened components alongside new dampers.
• Inspecting and replacing the associated rubber inserts, thrust rings, washers and mounting hardware can further help restore the integrity of the complete rear shock absorber assembly.
• For classic Porsche 964 owners, maintaining the original rear suspension mounting configuration is essential for preserving the vehicle's intended handling characteristics and ride quality.
• The OE MATCH Rear Shock Absorber Strut Mounting 96433306404/1 provides an OE-style replacement solution designed to restore secure damper mounting, reduce unwanted suspension noise and support reliable rear suspension operation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433306404

The product you are viewing cross references to these numbers

Shock Absorber Supporting Cover.
REAR

Fits:
Porsche 964 >>1990

Click 'Zoom in' for large parts diagram.
Diagram ref no 4.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833355100

The product you are viewing cross references to these numbers

Shock absorber threaded sleeve.
Rear

Fits:
Porsche 964 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433351100

The product you are viewing cross references to these numbers

Shock absorber threaded sleeve.
Rear


Fits:
Porsche 964 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433351100

The product you are viewing cross references to these numbers

Shock Absorber Top Mount Rubber Insert. REAR.

Fits:
Porsche 964 >>1990

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433306903

The product you are viewing cross references to these numbers

Shock Absorber Washer. REAR.

Fits:
Porsche 964 1991>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433310700

The product you are viewing cross references to these numbers

Spring top hat for Porsche 964 / 993

With certain applications using our 964/993 Adjustable Camber Plates (SR033/34) or Rear Shock Monoball Mounts (SR035/36) you may need to adapt the top of the spring (62mm ID) using our 964/993 Spring Top Hats.

Available with either a 12mm or 14mm through hole.

Sold as a set of two.