Shock Absorber Parts FRONT

Shock absorber adjusting  nut.
Front



Fits:
Porsche 964 1989-94 All models
Porsche 993 1994-98 (not RS)

Diagram ref no 8

Front Shock absorber adjusting nut. 
This nut locks and retains key shock/strut assembly elements in the correct position. It helps prevent looseness, unwanted movement, or misalignment within the front suspension, supporting consistent handling and steering feel.
Sold each, 2 required per vehicle.

Fits:
Porsche 964 1989 - 1994 All models
Porsche 993 1994 - 1998 (not RS)

Diagram ref no 8

Front shock absorber adjusting nut manufactured to replicate the original Porsche part’s thread form, dimensions, and seating interface. Designed for direct installation with factory-style front suspension components on Porsche 964 and 993 models.

Installed on the front strut/shock assembly, the adjusting nut provides secure mechanical retention and precise positioning of the shock insert or related strut components. Its correct fit and thread engagement are essential for maintaining suspension integrity under repeated load cycles, bumps, and braking forces.

Adjusting nuts can round off, seize, corrode, or lose thread integrity over time - especially in vehicles exposed to moisture, road salt, or frequent suspension work. Replacing a worn or damaged nut helps ensure the shock/strut assembly remains correctly secured, preventing noise, play, and potential suspension failure.

When to replace:
• Nut is seized, heavily corroded, or damaged during removal
• Rounded flats / tool damage prevents correct torqueing
• Visible thread wear or cross-threading
• Suspension rebuild, shock/insert replacement, or strut refurbishment
• Front end clunks/rattles traced to strut hardware (after inspection)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434350204

The product you are viewing cross references to these numbers

Shock absorber bump stops and dust covers. FRONT.
SET OF 4 PARTS

Fits:

Porsche 964 1989-94 (not RS)
Porsche 993 1994-98 (not RS)

Click 'Zoom in' for large parts diagram.
Diagram ref no 5 and 6.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434330100

The product you are viewing cross references to these numbers

Shock absorber concaved washer.
FRONT.

Fits:
Porsche 964 1989-94 All models
Porsche 993 1994-98 All models

Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434350301

The product you are viewing cross references to these numbers

Shock Absorber Concaved washer - Front

Fits:
Porsche 964 1989-94 All models
Porsche 993 1994-98 All models

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434350700

The product you are viewing cross references to these numbers

Shock Absorber Boot.
FRONT

Fits:
Porsche 964 1989-94 All models

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434350500

The product you are viewing cross references to these numbers

Shock absorber gasket.
FRONT

Fits:
Porsche 964 1989-94 All models

Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434151180

The product you are viewing cross references to these numbers

Shock Absorber Rubber Stop.
FRONT

Fits:
Porsche 964 1989-94 (not RS)
Porsche 993 1994-98 (not RS)

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434330100

The product you are viewing cross references to these numbers

Shock Absorber Bump Stop - Front
Sold each - 2 required per car

The OE Match Shock Absorber Bump Stop is a replacement suspension component designed to limit excessive suspension compression.

Fits:

• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) GT2 1994-97
• Porsche 993 (911) TURBO S 1994-97

Diagram ref no 5

It provides a cushioning effect when the suspension approaches the end of its travel, helping protect the shock absorber and surrounding components from damage.

What Does It Do?

The bump stop cushions the suspension during heavy compression, reducing the risk of the shock absorber reaching the end of its travel abruptly.

Why Does It Fail?

Common causes include:

• Age-related material deterioration
• Repeated suspension compression
• Exposure to road dirt and moisture
• Cracking or splitting
• Damage during shock absorber removal

When Should It Be Replaced?

Replace if the bump stop is cracked, crumbling, compressed or missing.

Inspection is recommended when replacing shock absorbers, springs or other suspension components.

Checks & Diagnosis

Inspect the bump stop for visible deterioration and check the shock absorber for leaks or damage.

Harsh impacts over bumps or excessive suspension bottoming may indicate worn suspension components requiring investigation.

Key Features

• OE Match replacement shock absorber bump stop
• Suitable for applicable Porsche 964 and 993 models
• Cushions excessive suspension compression
• Helps protect shock absorbers from damage
• Ideal for suspension servicing and restoration

Porsche 964 & 993 Shock Absorber Bump Stops and Suspension Parts

Shock absorber bump stops are important components of the Porsche 964 and 993 suspension systems, helping control suspension travel and protect shock absorbers during heavy compression.

Replacing deteriorated bump stops helps maintain suspension protection and supports reliable operation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434330100

The product you are viewing cross references to these numbers

SupShock Absorber Spacer Sleeve.
FRONT

Fits:
Porsche 964 1989-94
Porsche 993 1995-98

This product supersedes Porsche's old part numbers:
- 964 343 514 00

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434351402

The product you are viewing cross references to these numbers

Shock absorber strut cable clip, Front.
This original Porsche retaining clip is used in the front shock absorber strut area to help secure and organise the associated cable or wiring, maintaining the correct factory routing and preventing unwanted movement around the suspension components. An ideal replacement for a missing, broken or damaged original clip during suspension servicing, strut replacement or Porsche 964 restoration.
Sold individually

Fits:
Porsche 964 1989 - 1994

Diagram ref no 21

What This Product Does

Designed to help secure cables or wiring in their correct position, it is ideal for replacing broken or missing clips during front suspension repairs, shock absorber replacement or classic Porsche restoration.

Technical Details

• Part number: 99959193140
• Application: Porsche 964, 1989–94
  
  

Why Replace This Part?

Suspension retaining clips can become brittle, loose or damaged through age, vibration and repeated suspension servicing. A broken or missing clip may allow cables or wiring to move away from their intended mounting position, increasing the possibility of rubbing or damage. 

Replacing the clip with a Genuine Porsche part helps restore the correct original mounting arrangement.

When to Replace This Part

• When the original clip is broken or missing.
• During front shock absorber or suspension strut replacement.
• If associated cables are no longer securely retained.
• When carrying out front axle maintenance.
• During Porsche 964 suspension restoration.
• When renewing original suspension mounting hardware.

Where It Fits on the Car

The clip fits in the front suspension shock absorber strut area of the Porsche 964. It is shown in the Porsche front suspension / shock absorber strut parts diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959193140

The product you are viewing cross references to these numbers

Shock Absorber Supporting Mount. FRONT.
The OE Match Front Shock Absorber Supporting Mount is a high-quality replacement suspension component designed to securely mount the front shock absorber assembly to the vehicle body while isolating noise, vibration and harshness from the cabin. Manufactured to OE specifications for fit, strength and durability, this supporting mount plays a critical role in maintaining suspension performance, ride comfort and steering precision.  

Fits:

• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93  

Diagram Ref No 2

Constructed from durable metal and bonded rubber components, the mount absorbs suspension loads while allowing controlled movement of the shock absorber during operation. It serves as the primary connection point between the suspension strut assembly and the chassis, helping to maintain proper suspension geometry and vehicle handling characteristics.  

What This Product Does:

• Secures the front shock absorber assembly to the chassis.
• Supports suspension loads during driving.
• Absorbs and isolates noise, vibration and harshness (NVH).
• Maintains correct suspension alignment and geometry.
• Allows controlled movement of the suspension assembly.
• Contributes to precise steering response and vehicle handling.
• Helps protect surrounding suspension components from excessive stress
• Supports ride comfort and driving stability.

Symptoms Of Wear Or Failure:

• Clunking or knocking noises from the front suspension.
• Excessive vibration transmitted into the cabin.
• Poor ride quality or harsh suspension operation.
• Wandering or instability during driving.
• Reduced steering precision.
• Uneven tyre wear.
• Visible cracking or separation of the rubber mount.
• Excessive movement within the suspension assembly.
• Misalignment of suspension components.
• Premature wear of shock absorbers and associated parts.

Why Replacement Matters:

• Front shock absorber supporting mounts are subjected to constant suspension movement, road impacts, cornering forces and environmental exposure. Over time, the rubber isolator can deteriorate, crack or separate from its housing, while the mount itself may suffer from fatigue and wear.
• A worn supporting mount can negatively affect suspension performance, steering accuracy and ride comfort. Excessive movement within the mount can place additional strain on shock absorbers, springs and steering components, potentially leading to accelerated wear and costly repairs.
• Replacing a worn or damaged shock absorber supporting mount restores proper suspension support, improves ride quality and maintains precise vehicle handling. An OE Match replacement provides factory-style fitment, dependable vibration isolation and long-lasting durability, helping preserve the comfort, safety and performance characteristics expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434301803

The product you are viewing cross references to these numbers

Shock absorber supporting mount. FRONT


Porsche 964 C2 / C4 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434301803

The product you are viewing cross references to these numbers

Shock absorber top nut
FRONT

Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99908444109

The product you are viewing cross references to these numbers