Door Seals

Door Mirror Seal.

Fits:
Porsche 968 1992-95

Click picture for large parts diagram.
Diagram ref no 13.

Left or Right
Select below please

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94473124

The product you are viewing cross references to these numbers

Door Handle Seal - LARGE.
Left or Right side

Fits:
Porsche 968 1992-95

Price is for each.

Click picture for large parts diagram
Diagram Ref: 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94453763

The product you are viewing cross references to these numbers

Door Handle Seal - SMALL.

Fits:
Porsche 968 1992-95

Price is for each.

Click picture for large parts diagram
Diagram Ref: 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94453762

The product you are viewing cross references to these numbers

Door Seal, COUPE  

Fits

• Porsche 968 COUPE 3.0L 1992–95
  
  if you need CABRIO, please use this: link
  
  Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram ref no 7

What This Product Does

When the door closes, the seal forms a weather barrier at its contact with the body. This helps keep rain, airborne dirt and draughts outside while limiting noise passing through the door opening.

Functions

• Provides sealing contact at the door.
• Helps restrict moisture and dust entering the interior.
• Limits air movement and associated whistling around the opening.
• Supports cabin insulation with the door closed.
  
  Technical Details
  
  
• Installation side: Left/Right.
• Internal diagram identifies the component as Door seal.
• Quantity: 1.
  
  Symptoms of Fault

• Rainwater traces near the door opening or damp carpeting.
• Whistling or cold air around the closed door.
• Rubber that has become brittle, torn or visibly cracked.
• Flattening, deformation or reduced elasticity.
• Sealing gaps, particularly where corners have shrunk.
• Persistent damp odours or moisture on surrounding trim.
  
  Why Replacement Matters

Deteriorated rubber can lose the flexibility needed to maintain contact with the door and body. Replacing a defective seal helps re-establish weather protection, limit draughts and reduce repeated wetting of nearby interior materials. Check door alignment and drainage as well, since a replacement seal will not correct those separate faults.

FAQs

Can deteriorated rubber be restored instead?
Conditioning may offer temporary improvement, but splits, permanent hardening or shrinkage generally call for replacement.

What should be checked during fitting?
Remove dirt from the mounting channel, avoid stretching the rubber and inspect the alignment and drains before assessing the finished seal.

Check fitment for your specific vehicle (model, year, engine) before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94453709

The product you are viewing cross references to these numbers

Door Seal. Porsche 924S / 944 / 968

Fits:
Porsche 924S 1986-88
Porsche 944 1985-91
Porsche 968 1992-95

Click 'Zoom in' for large parts diagram
Diagram Ref: 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94455503

The product you are viewing cross references to these numbers

Door seal
These OE Match Door Seals are high-quality replacement components developed to replicate original Porsche specifications for fit, durability, and sealing performance. Mounted along the door frame, these seals create a continuous barrier between the door and the vehicle body.
Sold As: Individual side-specific pieces

Fits:
Porsche 924S 1986 - 1988
Porsche 944 1985 - 1991
Porsche 968 1992 - 1995

Diagram ref no 17

These seals play a critical role in protecting the vehicle interior from water ingress, dust, and external noise, while also contributing to overall cabin comfort. Designed for Porsche transaxle models, they are supplied individually and are side-specific, allowing replacement of either the left or right side as required.

These door seals prevent water, air, and debris from entering the cabin while helping to reduce wind noise and maintain interior comfort.

Function
• Creates a weathertight seal between door and body
• Prevents water leaks, dust ingress, and airflow intrusion
• Reduces wind noise and vibration
• Maintains proper door alignment and closing pressure
• Protects interior trim and electrical components

Over time, door seals can harden, crack, or lose elasticity, reducing their ability to seal effectively. This can lead to water leaks, increased cabin noise, and reduced driving comfort. Replacing worn seals restores proper sealing performance, protects the interior from moisture damage, and improves overall refinement.

When to replace
•  Visible cracks, splits, or flattening of the rubber
•  Water leaks or dampness inside the cabin
•  Increased wind noise while driving
•  Doors not sealing or closing properly
•  During restoration or repainting work

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94455503

The product you are viewing cross references to these numbers

Door Seal for CABRIOLET

Fits

• Porsche 944 Cabrio
• Porsche 968 Cabrio 1992–95
  
  If you require the 968 COUPE LEFT/RIGHT version use this: Link
  
  

Side selection: 94153709110 is the LEFT door seal; 94153709210 is the RIGHT door seal. These are alternative side-specific parts

Check fitment for your specific vehicle (model, year, engine) before ordering.

What Is This Part?

This is the flexible rubber weather seal at the door opening. Its shaped section contacts the surrounding bodywork when the door closes, helping maintain a continuous barrier along the sealing surface. On a Cabriolet, it works alongside the separate window and roof seals, so the condition and alignment of adjoining components also matter. Porsche technical information identifies these exact references as the left and right door seals for the 944 S2 & 968 Cabriolet. 


What Does This Part Do?

• Limits water entry: Closes the gap at the door opening to help keep rainwater outside.
• Reduces draughts: Maintains contact between the door and body sealing surfaces.
• Helps control wind noise: Restricts air passing through gaps caused by damaged or poorly seated rubber.
• Protects interior trim: Helps limit moisture reaching the sill and adjacent cabin materials.
  
  These functions depend on the seal retaining its shape and making consistent contact when the door is closed. 
  
  Why Replace This Part?

Ageing rubber can harden, split, shrink or remain flattened after repeated compression. When the seal no longer follows the opening or presses against its mating surface, gaps can allow water and air into the cabin. Replacement is appropriate where inspection confirms deterioration that cleaning or reseating cannot resolve. 

A leak does not automatically mean the door seal has failed. Door alignment, window adjustment, neighbouring seals and blocked drains can produce similar symptoms. Check these areas before replacing the seal, particularly if the rubber remains supple and undamaged. 

When to Replace This Part?

• Visible deterioration: Cracks, tears, brittle sections or damaged sealing edges.
• Permanent deformation: Flattened or distorted sections that no longer contact the mating surface.
• Poor seating: Sections that lift away or cannot be retained correctly after inspection.
• Confirmed leakage: Water tracks or draughts traced to a damaged section of the door seal.
• During repair: Damage discovered when the existing seal is removed or the door opening is inspected.

Inspect seal seating and contact pressure as well as the rubber itself; poor alignment can prevent an otherwise serviceable seal from working correctly. 

Where Is This Part Fitted?

Location: At the door perimeter, where the seal contacts the body shell around the door aperture. Select the left or right reference to match the side being repaired. 

FAQs

• Will a new seal cure every door-area leak? No. Check door and glass alignment, adjoining seals, internal water shields and drainage before deciding which component needs attention. ()
• Can seal conditioner repair damaged rubber? Suitable care products can help maintain flexibility, but cannot repair tears or restore a permanently damaged profile. 
  
  Product Summary

• Product: Door seal.
• Brand: Porsche.
• Left reference: 94153709110.
• Right reference: 94153709210.
• Purpose: Weather sealing between the closed door and body opening.
• Selection: Confirm body style and side before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94153709

The product you are viewing cross references to these numbers

Door window slot seal Inner. 
OE Match door window slot seal (often called a window scraper / beltline seal) for Porsche 924 / 944 / 968. It fits along the top edge of the door where the window glass passes through, sealing the window slot as the glass moves up and down.
Sold each, Fits left or right.

Fits:
Porsche 924 / 924S 1977 - 1988
Porsche 944 1982 - 1991
Porsche 968 1992 - 1995

Diagram ref no 3

The seal helps keep the window channel area protected from water, dirt, and road debris while supporting smooth window operation. It’s an essential trim-and-sealing component for keeping the door interior dry and preserving the condition of the window mechanism and door shell.

It wipes and seals the window glass as it moves, helping prevent moisture and grit from dropping into the door. It also improves cabin refinement by reducing drafts and wind noise around the glass-to-door interface.

Function:
• Seals the door window slot at the beltline
• Helps reduce water ingress into the door cavity
• Minimises dirt/debris entering the window channel
• Supports smoother, quieter window movement and a tidy exterior finish.

Old seals commonly harden, shrink, split, or deform, which can allow water and grit into the door - leading to corrosion, rattles, sluggish window operation, and premature wear of regulators/guides. Replacing the seal restores protection and the correct finished look along the top of the door.

When to replace:
•  Cracked, hardened, wavy, or missing seal edge
•  Water running into the door or damp door cards
•  Increased wind noise around the window line
•  Scratched glass from trapped grit / poor wiping action
•  During door/window restoration or repaint work

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477837471B

The product you are viewing cross references to these numbers

Door window slot seal.

Fits:
Porsche 924 / 924S 1977-88
Porsche 944 1982-91
Porsche 968 1992-95

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477837471B

The product you are viewing cross references to these numbers

Window Guide Seal Upper.

Fits:
Porsche 924S 1986-88
Porsche 944 1985-91 COUPE
Porsche 968 1992-95

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9445370

The product you are viewing cross references to these numbers

Window guide seal, Upper.

Please note: LEFT only, the right side is no longer available.

Fits:
Porsche 924S 1986-88
Porsche 944 1985-91 COUPE
Porsche 968 1992-95

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9445370

The product you are viewing cross references to these numbers