Turbo Chargers / Intercoolers & Parts

Aluminium intercooler system.

Fits:
Porsche 992.1 Turbo - 2020 to 2024
Porsche 992.1 Turbo S - 2020 to 2024
Porsche 992.1 Sport Classic - 2022 to 2024
Porsche 992.2 Carrera 2 - 2024 onwards
Porsche 992.2 Carrera 4 - 2024 onwards
(Porsche 992.2 - not for Hybrid models)

OEM ref
992.145.805.G
992.145.805.N

• Eliminates Heat Soak and Lowers Intake Air Temperatures (IATs) for Maximum Performance in Race Conditions – Especially Critical Due to Intercooler Placement in Engine Compartment
• Formula-1 Performance Grade Core by PWR (2-Row Core Featuring Rolled Tubes w/ Inner Fins)
• CNC Machined Billet End Tanks With Integrated Machined Y-Pipe Connection to Throttle Body
• 100% TIG Welded vs. OEM Style Gasket and Crimped Plastic End Tanks for Maximum Durability in High Boost Applications
• OEM Style CNC Machined Inlet/Outlet Connections for Precise Fitment with All OEM Components
• True Plug-and-Play "Drop-in Fit" Installation
• R&D and Performance Testing by Industry-Leading Porsche & McLaren Tuning Company, M Engineering
• Made in the USA at PWR North America

Cross reference numbers
992145805G

992145805N

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8188

The product you are viewing cross references to these numbers

LIQUI MOLY Pro-Line Turbocharger Additive – 20g 

LIQUI MOLY Pro-Line Turbocharger Additive is a specialist lubricant designed to protect new turbochargers during installation and initial start-up.

Applied before the turbocharger oil supply line is connected, it helps prevent dry running and damage caused by insufficient lubrication during the initial running-in phase.

Vehicle Compatibility

• Porsche turbocharged petrol and diesel engines
• Other turbocharged vehicles

Suitable for all turbochargers and compatible with commercially available engine oils. Always follow the turbocharger manufacturer's installation instructions.

What Does It Do?

The additive provides initial lubrication to the turbocharger, protecting internal moving components before the engine oil supply is fully established.

Its emergency-running properties help reduce the risk of damage caused by temporary oil starvation during initial start-up.

Why Is It Important?

A newly installed turbocharger may not receive full engine oil pressure immediately after starting.

Without adequate initial lubrication, the turbocharger shaft and bearings can experience excessive friction and premature wear.

When Should It Be Used?

Use when installing a new or replacement turbocharger, before the engine is started.

It is particularly useful during turbocharger replacement, engine rebuilding and professional workshop repairs.

Checks & Application

Fill the turbocharger oil inlet passage completely with LIQUI MOLY Pro-Line Turbocharger Additive before connecting the oil supply line.

Ensure the turbocharger oil feed and return lines are clean and correctly installed. Follow the manufacturer's recommended priming and start-up procedures.

Key Features

• LIQUI MOLY Pro-Line professional workshop product
• Product reference 21651 20g plastic tube
• Protects against dry running during initial start-up
• Helps prevent damage from insufficient lubrication
• Excellent emergency-running properties
• Improves new turbocharger operational reliability
• Compatible with commercially available engine oils
• Suitable for all turbochargers

LIQUI MOLY Turbocharger Additives & Porsche Turbo Installation Products

Turbochargers operate at extremely high speeds and require a reliable oil supply to protect their internal bearings and rotating components.

LIQUI MOLY Pro-Line Turbocharger Additive provides additional protection during the critical initial start-up period following turbocharger installation.

Suitable for compatible Porsche turbocharged engines, it is a useful workshop product for turbocharger replacement and engine rebuilding.

Porsche Throttle Body to Intercooler Seal 

This throttle body to intercooler seal is a critical component within the turbocharged intake system, providing an airtight seal between the intercooler outlet and the throttle body. It ensures that compressed air delivered from the intercooler enters the engine without pressure loss.
Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Targa 4 3.0L 2020-24
• Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
• Porsche 992.1 Turbo 3.8L 2020-24
• Porsche 992.1 Turbo S 3.8L 2020-24
• Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
• Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>

Diagram ref no 19

In turbocharged Porsche engines, maintaining a fully sealed charge air system is essential for performance, efficiency and reliability. Even a small failure in a sealing component can result in boost leaks, reduced power and engine management issues.

What This Seal Does

The seal sits between the intercooler and the throttle body, creating a secure and airtight connection.

It helps:

• Maintain correct turbo boost pressure
• Prevent air leaks within the intake system
• Ensure efficient airflow into the engine
• Support proper combustion and engine performance
• Maintain consistent throttle response

A properly functioning seal is essential for the correct operation of the turbo system.

Why Throttle Body Seals Fail

Sealing components are exposed to heat, pressure and constant airflow, which can lead to degradation over time.

Common causes of failure include:

• Heat exposure - High temperatures from compressed air can harden or deform the seal.
  
• Pressure stress - Continuous boost pressure can wear sealing surfaces.
  
• Material ageing - Over time, rubber or sealing materials lose elasticity.
  
• Removal and refitting - Seals can become damaged or deformed during servicing.

Symptoms of a Failing Seal

• Loss of turbo boost pressure
• Reduced engine performance
• Hissing noise from intake area
• Engine warning lights related to boost or airflow
• Poor throttle response
• Increased fuel consumption

Replacing a worn seal restores system integrity and prevents further performance issues.

Why You May Need to Replace This Seal

• Prevent Boost Leaks - A new seal ensures airtight connections within the intake system.
  
• Restore Engine Performance - Maintains proper airflow and boost pressure for optimal power delivery.
  
• Essential During Intercooler or Throttle Body Service - Recommended to replace whenever components are removed.
  
• Low-Cost Preventative Maintenance - A small component that plays a big role in turbo system efficiency.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992145865

The product you are viewing cross references to these numbers

Turbocharger.
The Genuine Porsche Turbocharger 0PB145701R / 0PB145702R is a replacement forced-induction component designed for compatible Porsche applications.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
• Porsche 992.1 Targa 4 3.0L 2020-24
• Porsche 992.2 Carrera 2 3.0L 2024>>  

Diagram Ref No 1 And 2

A turbocharger uses energy from the engine's exhaust gases to drive a turbine connected to a compressor wheel. The compressor increases the pressure and quantity of air supplied to the engine, allowing the engine-management system to deliver the intended levels of power, torque and response.

Turbochargers operate at extremely high rotational speeds and temperatures and depend on clean lubrication, correct cooling, unrestricted intake and exhaust flow, and properly functioning boost-control systems. Bearing wear, oil-supply problems, foreign-object damage, excessive temperatures or control faults can eventually cause turbocharger deterioration or complete failure.

Replacing a confirmed faulty turbocharger helps restore correct boost pressure and engine performance while reducing the risk of further damage to associated intake, exhaust and engine components.

What This Product Does:
The turbocharger increases the amount of air supplied to the engine by using energy that would otherwise leave through the exhaust.

Exhaust gases spin the turbine wheel. A shaft connects this turbine to a compressor wheel on the intake side.

As the compressor rotates, it compresses incoming air and supplies it to the engine under pressure.

This helps:

• Generate the required boost pressure
• Increase available intake airflow
• Increase engine power and torque
• Improve acceleration and engine response
• Maintain the intended factory performance
• Make effective use of exhaust-gas energy

The turbocharger works together with the intake, intercooling, exhaust, lubrication, cooling and electronic engine-management systems.

Symptoms Of Wear Or Failure:
Common symptoms associated with turbocharger deterioration can include:

• Loss of engine power
• Reduced boost pressure
• Slow boost response
• Poor acceleration
• Inconsistent power delivery
• Engine-management warning light
• Underboost or overboost fault codes
• Limp or reduced-power mode
• Increased engine oil consumption
• Blue or grey exhaust smoke
• Excessive oil in intake pipework
• Whining or siren-like noises
• Grinding or scraping noises
• Excessive turbocharger shaft play
• Damaged compressor or turbine blades
• Abnormal boost fluctuations

These symptoms can also be caused by faults elsewhere in the engine or boost system. Proper diagnosis should therefore be carried out before replacing the turbocharger.

Why Replacement Matters:
Replacing a confirmed worn or damaged turbocharger helps restore the intended operation of the forced-induction system.

A correctly functioning replacement can help:

• Restore boost pressure
• Restore engine power
• Restore torque
• Improve acceleration
• Restore throttle response
• Correct turbocharger-related mechanical noise
• Address oil leakage caused by internal turbo wear
• Restore reliable forced-induction operation
• Support correct engine-management operation
• Reduce the risk of secondary component damage

A severely damaged turbocharger should not remain in service.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0PB14570

The product you are viewing cross references to these numbers

Turbocharger.
The BorgWarner Turbocharger is a replacement forced-induction component for compatible Porsche applications, designed to restore correct boost pressure, airflow and engine performance when the existing turbocharger has become worn or damaged.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
• Porsche 992.1 Targa 4 3.0L 2020-24
• Porsche 992.2 Carrera 2 3.0L 2024>>  

Diagram Ref No 1 And 2

A turbocharger uses energy from the engine's exhaust gases to drive a turbine connected to a compressor wheel. The compressor increases the pressure and quantity of air supplied to the engine, allowing the engine-management system to deliver the intended levels of power, torque and response.

Turbochargers operate at extremely high rotational speeds and temperatures and depend on clean lubrication, correct cooling, unrestricted intake and exhaust flow, and properly functioning boost-control systems. Bearing wear, oil-supply problems, foreign-object damage, excessive temperatures or control faults can eventually cause turbocharger deterioration or complete failure.

Replacing a confirmed faulty turbocharger helps restore correct boost pressure and engine performance while reducing the risk of further damage to associated intake, exhaust and engine components.

What This Product Does:
The turbocharger increases the amount of air supplied to the engine by using energy that would otherwise leave through the exhaust.

Exhaust gases spin the turbine wheel. A shaft connects this turbine to a compressor wheel on the intake side.

As the compressor rotates, it compresses incoming air and supplies it to the engine under pressure.

This helps:

• Generate the required boost pressure
• Increase available intake airflow
• Increase engine power and torque
• Improve acceleration and engine response
• Make effective use of exhaust-gas energy

The turbocharger works together with the intake, intercooling, exhaust, lubrication, cooling and electronic engine-management systems.

Symptoms Of Wear Or Failure:
Common symptoms associated with turbocharger deterioration can include:

• Loss of engine power
• Reduced boost pressure
• Slow boost response
• Poor acceleration
• Inconsistent power delivery
• Engine-management warning light
• Underboost or overboost fault codes
• Limp or reduced-power mode
• Increased engine oil consumption
• Blue or grey exhaust smoke
• Excessive oil in intake pipework
• Whining or siren-like noises
• Grinding or scraping noises
• Excessive turbocharger shaft play
• Damaged compressor or turbine blades
• Abnormal boost fluctuations

These symptoms can also be caused by faults elsewhere in the engine or boost system. Proper diagnosis should therefore be carried out before replacing the turbocharger.

Why Replacement Matters:
Replacing a confirmed worn or damaged turbocharger helps restore the intended operation of the forced-induction system.

A correctly functioning replacement can help:

• Restore boost pressure
• Restore engine power
• Restore torque
• Improve acceleration
• Restore throttle response
• Correct turbocharger-related mechanical noise
• Address oil leakage caused by internal turbo wear
• Restore reliable forced-induction operation
• Support correct engine-management operation
• Reduce the risk of secondary component damage

A severely damaged turbocharger should not remain in service.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0PB14570

The product you are viewing cross references to these numbers