Roof Spoilers & Skins

The SilverRocket EVO-X Central Roof Fin Kit is a six-piece dry-carbon fibre aero upgrade for Porsche 992 GT3 and GT3 RS models. It adds a motorsport-influenced roof treatment while complementing the aerodynamic components fitted towards the rear of the vehicle.

Fits:
Porsche 992.1 GT3 4.0L / 2021-24
Porsche 992.1 GT3 RS 4.0L 2022-24
Porsche 992.2 GT3 2025>>

What This Product Does

These roof-mounted fins are formed to manage air travelling over the upper bodywork. Silver Rocket designed the six elements to operate alongside the EVO-X central shark fin, helping to direct airflow rearwards towards the wing assembly while providing a coordinated exterior appearance.

Functions

• Channels airflow along the roofline
• Complements the EVO-X central shark-fin arrangement
• Directs roof airflow towards the rear aerodynamic package
• Adds exposed-carbon detailing to the upper bodywork
• Provides a model-specific motorsport-inspired roof treatment

Technical Details

• Kit contents: six central roof fins and an installation template
• Construction: lightweight dry carbon fibre
• Material specification: aerospace-grade carbon fibre as stated by Silver Rocket
• Finish: high-gloss exposed carbon weave
• Carbon pattern developed to coordinate with factory Weissach Package components
• Silver Rocket states that development incorporates aerodynamic concepts associated with the Porsche 963 LMDh programme

Symptoms of Fault

• Cracked, chipped or distorted roof-mounted aero elements
• Lifting edges or deterioration around the mounting areas
• Rattling or movement caused by loose installation
• Fading, clouding or damage to the clear finish
• Uneven positioning that disrupts the roofline appearance
• Wind noise resulting from poor alignment or insecure fitting

Why Replacement Matters

Damaged or insecure roof fins can affect appearance and may create unwanted movement or noise. Correct alignment is particularly important where several aerodynamic elements must operate as one arrangement. Clean the installation area thoroughly, dry-fit every component and use the supplied template to confirm positioning before final installation.

FAQs

• What is supplied in the kit?
  Six dry-carbon central roof fins and a positioning template are included.
• Does the kit include the large central shark fin?
  The supplied components are the six smaller roof fins and mounting template. Other EVO-X aerodynamic elements should be checked separately.
• What finish do the fins have?
  They have a high-gloss exposed-carbon finish designed to coordinate with the weave used on Weissach Package components.
• Is careful preparation required?
  Yes. The roof surface should be clean and the complete set should be dry-fitted to verify spacing and alignment before installation.

The SilverRocket EVO-X Outer Roof Fin Kit is a two-piece dry-carbon upgrade for Porsche 992 GT3 and GT3 RS models. This kit contains only the two outer side roof fins.

Fits:
Porsche 992.1 GT3 4.0L / 2021-24
Porsche 992.1 GT3 RS 4.0L 2022-24
Porsche 992.2 GT3 2025>>

What This Product Does

These outer fins add a motorsport-influenced detail to the roofline and are shaped to help guide airflow rearwards. They are designed to work alongside the EVO-X central roof components where fitted, while also providing a defined exposed-carbon finish at each side of the roof.

Functions

• Adds two outer aerodynamic elements to the roofline
• Helps manage airflow travelling towards the rear wing
• Complements separately available EVO-X central roof components
• Provides an exposed dry-carbon exterior detail

Technical Details

• Kit contents: two outer side roof fins only
• Central shark fin and central roof fins are not supplied
• Manufactured from lightweight dry carbon fibre
• High-gloss exposed weave intended to complement Weissach Package carbon components
• Supplied with a mounting template
• Silver Rocket EVO-X design

Symptoms of Fault

• Cracked, chipped or damaged roof fins
• Faded, peeling or worn clearcoat
• Lifting edges or weakened adhesive
• Rattling or movement caused by insecure mounting
• Delamination or visible damage to the carbon finish

Why Replacement Matters

This set is suitable when replacing damaged outer fins or adding only the two side elements of the EVO-X roof treatment. Careful surface preparation and dry-fitting are important for accurate positioning, secure attachment and consistent alignment. The mounting template should be used before final installation.

FAQs

• Does this kit include the central shark fin?
  No. It contains only the two outer side roof fins.
• Are the central roof fins included?
  No. Any centre-mounted EVO-X roof components are available separately.
• How many fins are supplied?
  Two fins are included: one for each outer side of the roof.
• Is a mounting template supplied?
  Yes, the kit includes a template to assist with positioning.
• What should be checked before fitting?
  Clean the mounting surfaces thoroughly, dry-fit both fins and confirm their alignment before final attachment.

The SilverRocket EVO-X See-Through Shark Fin and Roof Fin Kit is a dry-carbon aerodynamic and styling package for Porsche 992 GT3 and GT3 RS models. Its transparent rear sections are designed to retain visibility through the interior mirror. Developed from advanced aerodynamic technologies pioneered in Porsche 963 LMDH hyper car, this kit has been thoughtfully optimized for both high-performance track use and practical daily driving.

Fits:
Porsche 992.1 GT3 4.0L / 2021-24
Porsche 992.1 GT3 RS 4.0L 2022-24
Porsche 992.2 GT3 2025>>

What This Product Does

The central shark fin and accompanying roof fins are shaped to manage airflow over the roof and towards the rear wing. The vertical centre fin is intended to support directional stability, while the additional roof elements provide a motorsport-influenced profile. Two lightweight transparent windows within the shark-fin mounting panel help preserve rearward visibility for road use.

Functions

• Guides airflow along the roofline towards the rear aero package
• Provides a central vertical stabilising surface
• Retains rearward visibility through two transparent panels
• Adds a motorsport-inspired roof and rear-deck profile
• Coordinates visually with exposed-carbon Weissach Package components

Technical Details

• Manufactured from lightweight dry carbon fibre
• High-gloss exposed carbon-fibre finish
• Carbon weave designed to coordinate with factory Weissach Package components
• Includes eight roof fins and one central shark fin
• Supplied with a see-through mounting plate and positioning template
• Manufacturer-listed applications include Porsche 992 GT3 RS and 992.1/992.2 GT3

Symptoms of Fault

• Cracked, chipped or delaminating carbon-fibre surfaces
• Lifting edges or deterioration around bonded areas
• Loose components causing vibration or rattling
• Uneven alignment across the roof or rear panel
• Damage to mounting points or transparent inserts
• Water ingress where mounting surfaces have not been sealed correctly

Why Replacement Matters

Damaged or poorly secured aerodynamic trim can create unwanted movement, noise and uneven panel alignment. Correct installation is important for maintaining secure attachment, consistent spacing and suitable sealing around the mounting areas. Professional fitting is recommended, particularly where drilling, bonding or surface preparation is required.

FAQs

• What is included in the complete kit?
  The package contains eight roof fins, a central shark fin with a see-through mounting plate and a positioning template.
• Does the shark fin obstruct the interior mirror?
  The mounting panel incorporates two transparent sections designed to retain rearward visibility.
• What material is used?
  The fins and shark-fin assembly are manufactured from dry carbon fibre with a high-gloss exposed weave.
• Is professional installation recommended?
  Yes. Accurate positioning, surface preparation, bonding and sealing are important for secure and even fitment.
• Should fitment be checked before installation?
  Yes. Confirm the exact Porsche generation, model and body specification before drilling, bonding or modifying any panel.

The EVO-X See-Through Shark Fin Kit by SilverRocket is a dry-carbon aerodynamic component for Porsche 992 GT3 and 992 GT3 RS. It combines a prominent central fin with two transparent rear panels, retaining visibility through the interior rear-view mirror while adding a motorsport-influenced roof profile. Developed from advanced aerodynamic technologies pioneered in Porsche 963 LMDH hyper car, this kit has been thoughtfully optimized for both high-performance track use and practical daily driving.

Fits:
Porsche 992.1 GT3 4.0L / 2021-24
Porsche 992.1 GT3 RS 4.0L 2022-24
Porsche 992.2 GT3 2025>>

What This Product Does

The central fin is designed to act as a vertical aerodynamic stabiliser and manage airflow travelling towards the rear wing. Its see-through mounting panel addresses the restricted rearward visibility normally associated with a solid motorsport-style panel.

Functions

• Guides airflow rearwards along the roofline
• Provides a vertical stabilising surface
• Retains rearward visibility through two transparent panels
• Coordinates with the vehicle’s rear wing and optional EVO-X roof fins
• Adds a competition-inspired exterior detail

Technical Details

• Manufactured from lightweight dry carbon fibre
• High-gloss exposed carbon finish
• Carbon weave intended to coordinate with Weissach Package components
• Includes one central shark fin with a see-through mounting plate
• Additional central and side roof fins are separate components and are not included
• Manufacturer-listed applications include Porsche 992 GT3 RS and 992.1/992.2 GT3

Symptoms of Fault

• Cracks or delamination in the carbon component
• Loose or damaged mounting points
• Movement, vibration or rattling while driving
• Lifting edges or uneven alignment against the roof
• Scratching, clouding or damage to the transparent panels
• Contact with surrounding bodywork or painted surfaces

Why Replacement Matters

A damaged or poorly secured aerodynamic component can create unwanted movement, noise and inconsistent panel alignment. Correct installation is important for maintaining stable mounting, suitable clearance and an even exterior finish. Inspect the mounting surface and associated fixings before fitting, and use professional installation where required.

FAQs

• What is supplied? One dry-carbon shark fin with a see-through mounting plate is included.
• Are the additional roof fins included? No. The central and side roof-fin sets are separate EVO-X components.
• Does the panel obstruct the rear-view mirror? The mounting panel incorporates two transparent sections intended to preserve rearward visibility.
• Does it match Weissach Package carbon? SilverRocket specifies a high-gloss exposed weave designed to coordinate with factory Weissach Package carbon components.
• Is professional fitting recommended? Professional fitting is advisable to ensure correct alignment, secure mounting and suitable clearance from painted surfaces.

Carbon Fibre Exterior Roof Panel – Sport Classic / GT3 RS Style

Transform the appearance of your Porsche 911 992 Coupé with the SFORZA Carbon Fibre Exterior Roof Panel, featuring styling inspired by the Porsche 992 Sport Classic and GT3 RS.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
• Porsche 992.1 Turbo 3.8L 2020-24
• Porsche 992.1 Turbo S 3.8L 2020-24
• Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
• Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
• Porsche 992.2 Turbo 3.6L 2024>>
• Porsche 992.2 GT3 2025>>

Manufactured from pre-preg carbon fibre and autoclave moulded at high temperature and pressure, this replacement exterior roof panel combines lightweight construction with a premium exposed carbon weave and gloss clear coat finish.

Weighing approximately 2.6kg, it is an ideal upgrade for owners looking to reduce weight high on the vehicle while adding one of the most distinctive carbon fibre features available for the 992.

Why Consider a Carbon Fibre Roof Upgrade?

The roof is one of the highest body panels on the car, making it a particularly desirable location for weight reduction. Reducing mass high in the vehicle can help lower the car's overall centre of gravity, although the actual benefit will depend on the weight of the original roof being replaced.

Beyond weight, the exposed carbon fibre creates a strong visual link to Porsche's more focused performance models and gives the 992 a distinctive Sport Classic and GT3 RS-inspired appearance.

Reasons to consider the upgrade include:

• Lightweight carbon fibre construction
• Approximately 2.6kg panel weight
• Reduces weight at one of the highest points of the body
• Sport Classic and GT3 RS-inspired appearance
• Exposed carbon fibre across a large exterior surface
• Complements other carbon fibre exterior upgrades
• Ideal for performance, restomod and bespoke
• Porsche 992 builds
• Direct replacement rather than a carbon overlay

Pre-Preg Autoclave Carbon Fibre Construction

The SFORZA roof panel is manufactured from high-quality pre-preg carbon fibre using an autoclave moulding process.

The carbon is cured under controlled high temperature and pressure, producing a lightweight and consistent component with the surface quality required for a large visible exterior panel.

Gloss Exposed Carbon Finish

The carbon weave remains exposed beneath a gloss clear coat, creating a deep, premium finish that highlights the construction of the panel.

As one of the largest exterior surfaces on the car, the carbon roof can dramatically change the appearance of the 992 and works particularly well alongside carbon fibre side skirts, mirror components, spoilers and other aerodynamic upgrades.

Compatible Models

Suitable for Porsche 911 992 Coupé models.

Important: This roof panel cannot be used as a replacement roof for the Porsche 992 GT3 RS. It does not incorporate the side flap indentation/housings required by the GT3 RS roof configuration.

Professional Installation Required

This is a replacement exterior roof panel and is not a cover designed to fit over the original roof.

The original exterior roof panel must be removed and the SFORZA carbon component installed using a suitable polyurethane adhesive. Adhesive is not supplied.

Installation requires removal of both the front and rear windscreens and should only be carried out by a qualified bodyshop experienced with Porsche 992 body construction and assembly.

A DIY installation manual is not supplied.

Porsche 911 992 Carbon Fibre Roof Panels

A carbon fibre roof is one of the most distinctive exterior upgrades available for the Porsche 911 992, combining lightweight construction with the visual appeal associated with Porsche's more focused performance models.

Unlike a carbon-look wrap or overlay, the SFORZA component replaces the original exterior roof panel. Its pre-preg autoclave construction and exposed gloss carbon finish make it particularly suited to high-end Porsche 992 performance, restomod and bespoke builds.

For owners looking to create a Sport Classic or GT3 RS-inspired Porsche 992, the carbon roof can also form the centrepiece of a wider exterior carbon package incorporating side skirts, mirror trim, spoilers and aerodynamic components.

Carbon Fibre Roof Fins – GT3 RS Style 
Sold as a pair

Add a distinctive GT3 RS-inspired detail to your Porsche 911 992 with the SFORZA Carbon Fibre Roof Fin Set.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
• Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
• Porsche 992.1 Turbo 3.8L 2020-24
• Porsche 992.1 Turbo S 3.8L 2020-24
• Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
• Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
• Porsche 992.2 Turbo 3.6L 2024>>
• Porsche 992.2 GT3 2025>>

Supplied as a left and right-hand pair, these roof fins are manufactured from pre-preg carbon fibre using an autoclave process at high temperature and pressure. They are finished with a gloss clear coat that highlights the exposed carbon fibre weave.

Compatible with the original Porsche 992 GT3 RS roof and standard 992 Coupé roof, the fins provide a straightforward way to introduce GT3 RS-style detailing without replacing the complete roof panel.

GT3 RS-Inspired Roof Styling

The roof fins reproduce one of the distinctive styling details associated with the Porsche 992 GT3 RS.

Positioned along the roof, they add a more purposeful motorsport-inspired appearance and work particularly well when combined with other exposed carbon fibre components.

They can also be fitted to the SFORZA Sport Classic / GT3 RS-style carbon fibre roof panel, allowing the complete roof area to be upgraded with a coordinated carbon finish.

Pre-Preg Autoclave Carbon Fibre

SFORZA manufactures the roof fins from pre-preg carbon fibre using an autoclave moulding process.

The material is cured under controlled high temperature and pressure to produce lightweight, consistent components with the premium surface quality expected from a visible carbon fibre exterior upgrade.

Gloss Carbon Fibre Finish

The exposed carbon weave is protected by a gloss clear coat, providing a deep, high-quality finish that complements both factory and aftermarket carbon fibre components.

The fins are particularly effective when paired with carbon fibre side skirts, mirror components, spoilers and the SFORZA carbon roof panel.

Simple Installation

Unlike the complete SFORZA replacement carbon roof, these roof fins do not require removal of the original roof panel.

They are installed using the supplied adhesive tape, making them a considerably simpler exterior upgrade.

Correct positioning and thorough preparation of the mounting surface are important to achieve secure adhesion and an accurate appearance.

Compatible Roofs

Suitable for:

• Original Porsche 992 GT3 RS roof
• Original Porsche 992 Coupé standard roof
• SFORZA Sport Classic / GT3 RS-style carbon fibre roof panel – SFC992817018GT3RS

Not suitable for Porsche 992 models equipped with a sunroof.

Porsche 911 992 GT3 RS-Style Carbon Fibre Roof Fins

SFORZA carbon fibre roof fins provide Porsche 992 owners with a simple way to introduce the distinctive roof styling associated with the 992 GT3 RS.

Their pre-preg autoclave carbon construction and exposed gloss finish make them particularly suited to Porsche 992 Coupé models already fitted with other carbon fibre exterior upgrades.

For a more comprehensive transformation, the fins can be combined with the SFORZA Sport Classic / GT3 RS-style carbon roof panel to create a coordinated exposed carbon fibre roof package.