Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Ignition Coils
A complete OE Match heat shield set designed to protect ignition components, supplied with the correct genuine Porsche mounting bolts for secure installation on Porsche 996 3.6L models.
SET OF 2 heat shields with Genuine Porsche hardware
Fits:
Porsche 996 3.6L Carrera 2 / 4 / 4S 2002 - 2005
* Engine code: 9603
Diagram ref no 31 and 37
The OE Match Cylinder Heat Shield Kit for Porsche 996 3.6L (2002 onwards) provides a complete solution for replacing worn or corroded ignition heat shields, ensuring proper protection of coil packs and surrounding engine components.
This kit includes two OE Match 99610444502 heat shields, designed to fit both left and right cylinder banks. These shields are mounted over the ignition coil packs and act as a barrier against radiant engine heat, helping maintain stable ignition performance and preventing premature failure of sensitive components.
To ensure correct installation, the kit also includes four genuine Porsche hexagon-head bolts (90037816301, M6 x 16). These bolts provide secure mounting and proper clamping force, essential in high-temperature engine environments.
Heat shields in this area are exposed to extreme heat cycles and moisture, often leading to corrosion or deterioration over time. Replacing them as a pair, along with fresh hardware, ensures consistent protection across both cylinder banks and avoids issues caused by weakened or seized fasteners.
This OE Match kit is ideal for maintenance, ignition system servicing, or preventative replacement on higher mileage vehicles.
Original heat shields commonly corrode, weaken, or fail due to constant exposure to heat and moisture. A damaged or missing shield can lead to overheating of ignition coils, increasing the risk of misfires and reduced engine reliability. Replacing both shields together, along with new mounting bolts, ensures proper thermal protection and prevents issues caused by worn or seized hardware.
When to replace:
• Visible rust, corrosion, or deterioration
• Missing or loose heat shields
• Ignition coil issues related to heat exposure
• During coil pack replacement or servicing
• Preventative maintenance on high-mileage engines
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610444502
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005

Fits:
Porsche Boxster 986 2.5L 1997-99
Porsche Boxster 986 2.7L 1999-02
Porsche Boxster S 986 3.2L 1999-02
Porsche 996 C2 3.4L 1997-08/01
Porsche 996 C4 3.4L 1997-08/01
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99760210405
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
Porsche 996 / Boxster 986 / Boxster 987 / 996 GT3 MKII

same as 99760210404/1
PACK OF 6
Fits:
Porsche 996 3.6L Inc C2 / C4 / C4S
Porsche 986 Boxster 2.7L / 3.2L 3.4L 2003>>
Porsche 996 GT3 MKI
Porsche 996 GT3 MKII
Porsche 996 Turbo
Porsche 987 Boxster 2.7L / 3.2L
Porsche 987C Cayman 2.7L / 3.4L
Porsche 997 3.6L, 3.8L / 997 GT3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99760210405
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
This OE Match ignition coil set includes six coil-on-plug ignition coils, designed for Porsche flat-six engines used in models such as the Porsche 911 (996 / early 997), Boxster (986 / early 987) and Cayman variants. Each coil mounts directly onto a spark plug and delivers the high-voltage spark required to ignite the air-fuel mixture inside the engine cylinders.
Fits:
Porsche Boxster 986 2.5L 1997 - 1999
Porsche Boxster 986 2.7L 1999 - 1902
Porsche Boxster S 986 3.2L 1999 - 1902
Porsche 996 C2 3.4L 1997 - 08/2001
Porsche 996 C4 3.4L 1997 - 08/2001
Please note: if you require screws order code 90006708901
The ignition coils generate the high-voltage electrical pulse required to create a spark at the spark plug. This spark ignites the air-fuel mixture inside the combustion chamber, enabling the engine to produce power.
Replacing all six coils at the same time ensures uniform ignition performance and prevents issues caused by mismatched coil age or output.
Function
• High-Voltage Generation: Converts 12-volt electrical power into ignition spark voltage
• Cylinder Ignition: Delivers spark directly to each spark plug
• Engine Performance: Supports smooth combustion and consistent power delivery
• Balanced Operation: Six matched coils ensure even ignition across all cylinders
Ignition coils operate in a high-temperature environment close to the engine. Over time the plastic housings can crack or internal components may weaken, leading to misfires, rough running or reduced engine performance. Replacing all coils together ensures consistent spark energy across all cylinders and restores smooth engine operation.
When to Replace. Consider replacing the ignition coils if you notice:
• Engine misfires or rough idle
• Loss of power during acceleration
• Check engine light related to ignition faults
• Cracked ignition coil housing
• During spark plug replacement or major engine service
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SERVICEPACK996
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
Ignition Coils
At Design911, we supply a wide range of ignition coils for Porsche models, from everyday road cars to high-performance and classic engines. Whether you are chasing a misfire, carrying out preventative maintenance or refreshing a full engine build, we can help you select the right coils and related parts for your Porsche.
Why do Ignition Coils matter?
Ignition coils play a central role in how smoothly and reliably your Porsche engine runs. They convert battery voltage into the high voltage needed to fire the spark plugs, cycle after cycle, under a wide range of temperatures and loads. Over time, heat, vibration and age can cause internal breakdowns or cracks in the coil body or boots, leading to misfires, rough running and warning lights. Replacing tired or failing coils restores clean combustion, protects the engine against unburnt fuel and helps your Porsche feel as it should.
- Maintain smooth running and consistent power delivery when the ignition system is healthy
- Reduce misfires, hesitation and difficult starting caused by weak or failing coils
- Support long-term engine reliability by ensuring a strong, consistent spark
- Match original Porsche specification or choose trusted aftermarket brands to suit your needs and budget
Common options & kits
Individual replacement coils
Specific ignition coils supplied per cylinder or per position, ideal when you are dealing with an isolated misfire or replacing a recently failed part on an otherwise well-documented engine.
- Target a single problem cylinder when diagnosis is clear
- Useful where other coils are relatively new
- Can be combined with new spark plugs in the affected position
Matched sets or axle-style pairs
Multiple coils supplied together so that all cylinders, or a full bank, are renewed at the same time. This is a common approach on higher-mileage Porsche engines or when history is unknown.
- Helps avoid chasing repeated misfires as older coils fail one by one
- Ensures consistent age and behaviour across all cylinders
- A sensible choice when access to the coils is time-consuming
Complete ignition refresh kits
Grouped parts designed to service the ignition system in one go, often including coils, spark plugs and associated hardware depending on the application.
- Everything specified in a single package for a planned service or rebuild
- Reduces the risk of missing boots, clips or one-time-use hardware
- Ideal when upgrading or refreshing a Porsche engine with unknown history
Brands available in this category
For this category we stock a wide choice of trusted brands for Porsche models. You can also browse and filter by brand on this page to focus on your preferred manufacturers.
- Beru – Long-established ignition specialist with OE-level quality on many Porsche applications. Popular when owners want components that closely match original fit and function.
- Bosch – A leading name in ignition and engine management. Often chosen where consistent manufacturing and compatibility with Porsche control systems are a priority.
- Hella – Known for lighting and electronics, also supplying electrical components that integrate well with Porsche systems where specified.
- OE Match – Parts engineered to match original Porsche specifications at a sensible cost, suitable for routine maintenance and long-term ownership where value and correct fit both matter.
- Design911 Kits – Curated packages that bundle the correct coils and supporting items for specific Porsche models, helping you order what you need in one step.
When should you review or replace your Porsche ignition coils?
Checking ignition coils and related components regularly helps you catch issues before they affect driveability or lead to more involved repairs. On many Porsche engines, age, heat and mileage gradually weaken coils long before they fail completely, so paying attention to symptoms and service history is worthwhile.
- You experience misfires (often under load), hesitation or a noticeably rough idle
- Starting becomes difficult, especially when hot, or the engine feels uneven
- The engine warning light appears with misfire fault codes stored
- There is a noticeable fuel smell from unburnt fuel during misfire events
- Coil boots show visible cracking, tracking marks or signs of arcing
- Service history is unclear and the coils are likely original on a higher-mileage Porsche
- You are carrying out an engine refresh or major service and want known-good ignition parts
If any of these apply, it is a good time to review the ignition coils and associated items on your Porsche, so that the engine remains reliable and enjoyable to use.
Explore ignition coils with Design911
Browse ignition coils for Porsche at Design911 – from individual OE-style coils to full refresh kits – and find options to suit everything from routine servicing to complete engine projects. Our team can assist with part-number checks and model-specific advice so you can order with confidence and keep your Porsche running at its best.