Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.co.uk/images/schemaLogo.png https://www.design911.co.uk/images/schemaLogo.png +443456003478 https://www.design911.co.uk Facebook Instagram

Track Rods

Filter by brand
DISPLAYING 1 to 4 (of 16 products)
1 2 3 4
99634732203/4KIT
Product Information
Product Information
Track rod inner joints set of 2. Porsche 986 / 996
SET OF 2

oematch

Fits:
Porsche 986 Boxster 1997-05
Porsche 996 1998-05
Porsche 996 Turbo / GT2 / GT3

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click picture for large parts diagram.
Diagram Ref No 6.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634732203
996.347.322.03
99634732203
99634732203
99634732203
99634732203
99634732203
4160310002
58090

The product you are viewing cross references to these numbers
2180008
Product Information
Product Information
Bump steer adjustable track rod ends.

elephantracing

Fits
Porsche 986 Boxster
Porsche 996, 997
Porsche 987 Boxster and Cayman
Porsche 981 Boxster and Cayman
Porsche 991

Set of 2 x adjustable track rod ends

Correct geometry for lowered cars with bump steer adjustment and angled head.

Bump steer adjustable – The built in bump steer adjustment lets you dial in a minimal bump steer curve.

Angled head – Lower the car and the tie rods angle down. This shifts the ball stud from its center and limits the available range of articulation.
We solve this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height.

Fully weather sealed – Proper boot at the ball stud to keep water and contaminant out for extended life.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180008
2180008
99634713103
99634713104
99134713100
99634713105
99634713101
99634713102

The product you are viewing cross references to these numbers
370
Product Information
Product Information
Front Bump Steer Kit.
SET OF 2

replacement for 99634713104, 99634713103, 99134713100,

rss

Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2S, C4, C4S, Turbo, GT2, GT3
Porsche 986 Boxster / Boxster S
Porsche 987 Boxster / Boxster S
Porsche 987 Cayman / Cayman S

The RSS Adjustable Toe Steer Kit is designed for 996 and 997 models that have been lowered.

This kit will help minimize suspension geometry changes in the front of the vehicle and allow additional toe adjustment at the toe steer arm. Features heavy duty, high tolerance monoball rod
ends for precise suspension articulation with improved handling and feedback. The rod ends are also height adjustable to help reduce/eliminate bump steer.

The links are sold as a pair for the front of the car.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

370
99634713104
99634713103
99134713100
99634713105
99634713101
99634713102

The product you are viewing cross references to these numbers
Special Order item
99908444909
Product Information
Product Information
Lock nut for Steering rack tie rod end, M12 x 1,5
This Genuine Porsche lock nut is an OE M12 x 1.5 fastening nut used for securing steering rack tie rod end and related chassis components on selected Porsche 993, 996, 997, 991, Boxster, Cayman and 970 Panamera models. It is ideal for replacing damaged, corroded or previously removed nuts during steering, suspension or chassis repairs.
Sold individually, 2 required per vehicle

Fits:
Porsche 993 1995 - 1998
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019
Porsche Boxster 986 1997 - 2004
Porsche Boxster 987.1 2005 - 2008
Porsche Boxster 987.2 2009 - 2012
Porsche Boxster 981 2012 - 2016
Porsche Cayman 987.1 2005 - 2008
Porsche Cayman 987.2 2009 - 2012
Porsche Cayman 981 2012 - 2016
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016

Diagram ref no 10

This lock nut fits in the steering and chassis assembly, commonly used at the steering rack tie rod end / track rod end connection. Depending on model and application, M12 x 1.5 lock nuts may also appear in suspension and control arm fastening locations.

This is a small but important OE Porsche hardware item that helps secure critical chassis and steering components to the correct factory standard.

Functions
•  Secures the steering rack tie rod end connection
•  Provides a factory-correct M12 x 1.5 locking fastening point
•  Helps maintain secure attachment of steering and chassis components
•  Supports correct steering geometry and component stability
•  Helps prevent loosening caused by vibration, road loads and suspension movement
•  Suitable for replacement during steering rack, track rod or tie rod end work
•  Maintains OE Porsche fitment and fastening quality.

Lock nuts are designed to provide secure fastening and are often recommended for replacement after removal, especially on steering and suspension components. Over time, the nut can corrode, seize, round off or lose its locking effectiveness. Replacing the original nut with a Genuine Porsche OE M12 x 1.5 lock nut helps ensure the tie rod end or related component is secured correctly and safely. This is especially important on steering components, where correct fastening is essential for accurate steering response and road safety.

When to replace
•   When replacing a steering rack tie rod end or track rod end
•   When removing or refitting steering rack components
•   If the original nut is corroded, seized or damaged
•   If the nut thread is worn or the locking function is compromised
•   During suspension or steering overhaul work
•   After accident repair or chassis component replacement
•   When restoring the car with correct OE Porsche hardware.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99908444909
99908444909

The product you are viewing cross references to these numbers
DISPLAYING 1 to 4 (of 16 products)
1 2 3 4
Also found on these pages
About Track Rods

Porsche Track Rods | Design911 Precision Steering & Suspension Components for Accuracy and Stability

Track rods (also known as tie rods) are crucial steering components that connect the steering rack to the wheel hubs, transferring steering input directly to the wheels. They play a key role in maintaining alignment, stability, and cornering precision. A well-functioning track rod ensures smooth steering response, balanced geometry, and predictable handling — essential for the sharp, communicative driving experience Porsche is known for.

At Design911, we stock a wide range of track rods and tie rod ends, engineered for strength, precision, and longevity. Manufactured from high-grade steel and corrosion-resistant materials, each component is designed to perform under high loads and extreme driving conditions. Whether for daily maintenance, restoration, or performance upgrades, our track rods deliver the precision and reliability demanded by Porsche drivers worldwide.

What Do Track Rods Do?

Track rods are vital to the steering system, converting motion from the steering rack into the turning movement of the wheels.

Core Functions:
• Transmit steering input from the rack to the wheel hub assembly.
• Maintain wheel alignment and geometry for stable handling.
• Allow controlled articulation and suspension movement.
• Support precise cornering and responsive steering feedback.
• Ensure predictable handling in performance and road driving.

Accurate, durable track rods are essential for both safety and performance, ensuring every steering input results in precise and confident road control.

Why Do Track Rods Fail or Degrade?

Track rods and tie rod ends are constantly exposed to road vibrations, suspension movement, and environmental factors, leading to wear over time.

Common Causes of Failure Include:
• Ball joint wear causing looseness or excessive play.
• Corrosion or damage from road debris and moisture.
• Rubber boot cracking, allowing dirt to contaminate joints.
• Impact damage from potholes, kerbs, or rough terrain.
• Age-related metal fatigue or seized threads.

Worn or damaged track rods can lead to poor steering response, uneven tyre wear, and alignment issues — making timely replacement critical for handling precision and safety.

Why Replace or Upgrade Your Porsche Track Rods?

Replacing or upgrading your track rods restores steering accuracy, alignment integrity, and suspension performance. High-quality replacements ensure tight, consistent control and better feedback through the steering wheel.

Key Benefits:
• Restores steering precision and responsiveness.
• Eliminates looseness and improves handling stability.
• Prevents uneven tyre wear and maintains alignment.
• Made from durable, corrosion-resistant materials.
• Available for Porsche 911, 944, 968, Boxster, Cayman, Cayenne, and Panamera.
• Ideal for maintenance, suspension upgrades, or full restorations.

Design911’s Porsche track rods deliver the strength, balance, and precision required to keep your Porsche performing at its best on both road and track.

Highlights

• Premium Porsche track rods and tie rod assemblies.
• Precision-engineered for strength and accuracy.
• Corrosion- and wear-resistant construction.
• Designed for consistent alignment and handling performance.
• Suitable for both classic and modern Porsche models.
• Perfect for servicing, restoration, or performance tuning.

You may also like
Popular Models