SPORTS Brake Disc

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Porsche 996 GT3 MK1 and MK2 with PCCB
Porsche 996 GT2 with PCCB
Porsche 996 GT3
Porsche 996 GT2
Porsche 997.1 GT3 without PCCB
Porsche 997.1 GT2 without PCCB



Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. 

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Front rotor: 350mm Direct Replacement
Porsche 996 GT3 Cup Car

Kit Contains:
Brake Disc 350 complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. 

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Porsche Cayman S with PCCB
Porsche Cayman R with PCCB
Porsche 996 Mk1 and MK2 GT3 with PCCB
Porsche 996 Turbo / GT2 with PCCB
Porsche 997.1 with PCCB
Porsche 997.1 Turbo / GT3 / GT2
Porsche 997.2 with PCCB
Porsche 991.1 C2S with PCCB
Porsche 991.1 C4S with PCCB
Porsche 991.2 C2S / C4S / GTS with PCCB
Porsche 992 C2S / C4S with PCCB

Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. 

This discs will fit cars with the Ceramic option from factory.

This product is a special order item, allow 5 - 7 working days for delivery.

Zimmermann Black Coat Z Brake disc rotor - Rear

Internally Vented, Slotted
Surface: Coated
Outer diameter: 330mm
Brake Disc Thickness: 28mm
Bolt Hole Circle Ø: 130mm
Centering Diameter: 98mm
Weight: 9.1kg
Hole Pitch / Number: 10/5


Not for cars with ceramic brake (PCCB)
Porsche 996 C4S / turbo - 2001 to 2005
Porsche 996 GT3 / GT3 RS - 1999 to 2004
Porsche 997.1 C2S / C4S - 2005 to 2008 
Porsche 991.1 C2S / C4S - 2012 to 2016
Porsche 991.2 C2S - 2016 to 2019 (for cars with central locking wheels)
Porsche 991.2 C4S  - 2016 to 2019  (for cars with central locking wheels)

The Zimmermann Black:Z brake disc was developed by combining expertise from production brake discs with insights gained through motorsport, particularly in the VLN racing series. Featuring a unique groove pattern protected by a utility model, the Black:Z offers an optimal alternative to the perforated Sport:Z disc.

Engineered to deliver the high braking performance demanded in racing, this disc also excels in everyday road use. Like all Zimmermann products, it is manufactured exclusively from premium-quality cast materials.

The result speaks for itself, with the VLN racing team praising its performance: “The disc is amazing!”

Approved for both road and track use, the Zimmermann Black:Z is a versatile, high-performance solution for discerning drivers.

Your advantages: 

• Faster brake response due to optimized water drainage
• Better wet braking performance
• Utility model protected groove pattern ensures optimal heat dissipation and thus improved braking performance
• Brake fading is avoided
• Cooler look Better appearance thanks to anti-corrosion coating Coat Z+
• Better grip and faster brake response through constant sharpening of the pads
• Replacement of the original disc 1:1 possible
• ECE R90 approved

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99135240

The product you are viewing cross references to these numbers

Brake disc rotor Rear. Porsche 996 / 997 / 991 (OE No 99635240502 and 99635240602) SLOTTED.
Brake Disc Size 330mm x 28mm.




Porsche 996 Turbo 2001-05 REAR
Porsche 996 GT2 (M449 steel disc) 2001-05 REAR
Porsche 996 C4S 2001-05 REAR
Porsche 996 GT3 1999-04 REAR
Porsche 996 GT3 RS 1999-04 REAR
Porsche 997 C2S 2005-08 REAR
Porsche 997 C4S 2005-08 REAR
Porsche 997 3.6L C2 MKII 2009>> REAR
Porsche 997 3.8L C2S MKII 2009>> REAR
Porsche 997 3.8L C4S MKII 2009>> REAR
Porsche 991 3.8L 2S 2012>> REAR
Porsche 991 3.8L 4S 2012>> REAR


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99635240

The product you are viewing cross references to these numbers

Ninemeister Carbon Ceramic Rear Brake Discs - Porsche 997 PCCB Replacement - Sold as a pair
Disc size: 350 x 29mm

The Ninemeister Carbon Ceramic Rear Brake Discs are a direct, high-performance replacement for OEM Porsche PCCB (M450) rear brake discs, engineered for the Porsche 996. Designed to deliver extreme weight reduction, exceptional heat resistance, and long-term durability, these discs represent the pinnacle of braking technology for road and track use.

Fits

• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 996 TURBO 2000-05
• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKI 1999-02
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 RS 2003-04

Available from Design911, Ninemeister carbon ceramic rear discs combine advanced carbon ceramic materials with precision CNC-machined floating hardware to restore and exceed factory PCCB performance.

What Do Ninemeister Carbon Ceramic Rear Discs Do?

These rear brake discs dramatically improve braking performance and chassis dynamics.

Core Functions:

• Replace OEM PCCB rear discs with a direct-fit carbon ceramic solution.
• Reduce unsprung and rotational mass for improved handling.
• Deliver consistent braking performance under extreme heat.
• Improve rear braking stability and balance.
• Maintain fade-free braking during aggressive driving and track use.

With a significant reduction in unsprung weight, suspension response and overall vehicle control are noticeably enhanced.

Why Upgrade to Ninemeister Carbon Ceramic Rear Discs?

Upgrading or replacing PCCB rear discs with Ninemeister components offers major performance and ownership benefits.

Upgrade Advantages:

• Ultra-lightweight design, typically over 50% lighter than cast iron discs.
• Two-piece floating construction with CNC-machined 7075-T6 billet aluminium centre bells, hard anodised for strength and corrosion resistance.
• Carbon ceramic discs manufactured from long-length carbon fibre strands reinforced with silicon carbide.
• Exceptional resistance to brake fade under extreme temperatures.
• Extremely long service life, with potential lifespan of hundreds of thousands of miles.
• Significantly reduced brake dust compared to iron braking systems.
• Outstanding thermal stability for repeated high-performance use.

These discs are ideal for owners seeking OEM PCCB replacement without compromising performance, durability, or exclusivity.

Engineering & Specification Highlights

• Direct replacement for OEM Porsche PCCB (M450) rear discs
• Two-piece floating disc design 7075-T6 CNC-machined billet aluminium centre bells, hard anodised
• Advanced carbon ceramic friction rings
• Disc size: 350 x 29mm
• Extreme heat resistance and fade-free operation
• Designed specifically for Porsche 997 high-performance models

Key Benefits

• Massive reduction in unsprung mass
• Sharper handling and improved suspension response
• Consistent braking performance under extreme conditions
• Dramatically reduced brake dust
• Exceptional longevity compared to iron discs       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M996GTR

The product you are viewing cross references to these numbers

DesignTek Carbon Ceramic Front Brake Discs For Porsche 996.
Sold as a pair

Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm

Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.

Fits:
Porsche 996 C4S 3.6L 09/01-2005
Porsche 996 TURBO 2000-05
Porsche 996 GT2 2001-05
Porsche 996 GT3 MKI 1999-02
Porsche 996 GT3 MKII 2003>>

Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution. 

Product Features:

• Carbon ceramic construction for high heat tolerance and fade-resistant braking
• Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
• Lightweight design reduces unsprung and rotating mass for quicker response
• Exceptional thermal stability and wear resistance
• Designed for use with OE and compatible aftermarket calipers
• Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
• Ideal for high-performance road use and track performance driving

Important Fitment & Usage Notes:

• Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
• Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
• Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
• Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36040096CCF

The product you are viewing cross references to these numbers

DesignTek Carbon Ceramic Rear Brake Discs For Porsche 996.
Sold as a pair

Brake Disc Ø: 350mm
Brake Disc Thickness: 28mm

Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.

Fits:
Porsche 996 C4S 3.6L 09/01-2005
Porsche 996 TURBO 2000-05
Porsche 996 GT2 2001-05
Porsche 996 GT3 MKI 1999-02
Porsche 996 GT3 MKII 2003>>

Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution. 

Product Features:

• Carbon ceramic construction for high heat tolerance and fade-resistant braking
• Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
• Lightweight design reduces unsprung and rotating mass for quicker response
• Exceptional thermal stability and wear resistance
• Designed for use with OE and compatible aftermarket calipers
• Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
• Ideal for high-performance road use and track performance driving

Important Fitment & Usage Notes:

• Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
• Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
• Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
• Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36040096CCR

The product you are viewing cross references to these numbers

DesignTek Front Brake Pads For Carbon Ceramic Brake Discs. Porsche 996 / 997 / 987.

DesignTek Carbon Ceramic Front Brake Pads are engineered specifically for use with carbon ceramic brake discs, delivering consistent, fade-resistant braking performance for both high-performance road driving and track use.

Unlike conventional brake pads designed for iron discs, these pads use a carbon-ceramic-compatible friction compound that operates effectively across a wide temperature range without damaging the disc surface. The result is strong, progressive braking feel, excellent modulation, and stable performance under repeated heavy braking.

Ideal for drivers seeking a refined street braking experience with the durability and performance required for spirited or track-focused driving, DesignTek brake pads offer a reliable OE-replacement solution for Porsche carbon ceramic braking systems.

Fits:
Porsche Boxster 987 2.7L 2005 -08/08
Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Porsche Boxster 987 MKII 2.9L 2009-2012
Porsche Boxster S 987 MKII 3.4L 2009-2012
Porsche 996 GT2 2001-05
Porsche 996 GT3 MKI 1999-02
Porsche 996 GT3 MKII 2003>>
Porsche 997 MK1 Carrera 2 3.6L 2005-08
Porsche 997 MK1 GT3 2007-09
Porsche 997 MK1 GT2 2007-09
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII GT2 RS 2011-13
Porsche Cayman 2.7L 987C 2006-08
Porsche Cayman S 3.4L 987C 2005-08
Porsche Cayman 2.9L 987C MKII 2009-12
Porsche Cayman S / R 3.4L 987C MKII 2009-12
Porsche Carrera GT  

Key Features:

• Specifically formulated for carbon ceramic brake discs
• Suitable for street and track use
• Excellent fade resistance at elevated temperatures
• Consistent friction characteristics across the full operating range
• Progressive pedal feel and strong initial bite
• Low dust output compared to conventional iron-disc pads
• Designed for use with OE and compatible aftermarket calipers
• Both Street and Race Pads are ECE R90 E11 Certified, ensuring no compliance issues

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36040099059

The product you are viewing cross references to these numbers

DesignTek Front/Rear Brake Pads For Carbon Ceramic Brake Discs. Porsche 982 / 996 / 997 / 986 / 987 / 981.

DesignTek Carbon Ceramic Front / Rear Brake Pads are engineered specifically for use with carbon ceramic brake discs, delivering consistent, fade-resistant braking performance for both high-performance road driving and track use.

Unlike conventional brake pads designed for iron discs, these pads use a carbon-ceramic-compatible friction compound that operates effectively across a wide temperature range without damaging the disc surface. The result is strong, progressive braking feel, excellent modulation, and stable performance under repeated heavy braking.

Ideal for drivers seeking a refined street braking experience with the durability and performance required for spirited or track-focused driving, DesignTek brake pads offer a reliable OE-replacement solution for Porsche carbon ceramic braking systems.

Fits:
Porsche Boxster S 986 3.2L 1999-02
Porsche Boxster S 986 3.2L 2003-04
Porsche Boxster 987 2.7L 2005 -08/08
Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Porsche Boxster 987 MKII 2.9L 2009-2012
Porsche Boxster S 987 MKII 3.4L 2009-2012
Porsche Boxster 981 Spyder 3.8L 2016
Porsche Boxster 718 2.0L Manual (300 Bhp)
Porsche Boxster 718 2.0L PDK (300 Bhp)
Porsche Boxster S 718 2.5L Manual (350 Bhp)
Porsche Boxster S 718 2.5L PDK (350 Bhp)
Porsche Boxster T 718 2.0L Manual (300 Bhp)
Porsche Boxster T 718 2.0L PDK (300 Bhp)
Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
Porsche 996 C2 3.4L 1997-08/01
Porsche 996 C4 3.4L 1997-08/01
Porsche 996 C2 3.6L 09/01-2005
Porsche 996 C4 3.6L 09/01-2005
Porsche 996 C4S 3.6L 09/01-2005
Porsche 996 TURBO 2000-05
Porsche 996 GT2 2001-05
Porsche 996 GT3 MKI 1999-02
Porsche 996 GT3 MKII 2003>>
Porsche 997 MK1 Carrera 2S 3.8L 2005-08
Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Porsche 997 MKII Carrera C2S 3.8L 2009-12
Porsche 997 MKII Carrera C4S 3.8L 2009-12
Porsche Cayman 2.7L 987C 2006-08
Porsche Cayman S 3.4L 987C 2005-08
Porsche Cayman 2.9L 987C MKII 2009-12
Porsche Cayman S / R 3.4L 987C MKII 2009-12
Porsche Cayman S / GTS 3.4L 981 2013-16
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L  

Key Features:

• Specifically formulated for carbon ceramic brake discs
• Suitable for street and track use
• Excellent fade resistance at elevated temperatures
• Consistent friction characteristics across the full operating range
• Progressive pedal feel and strong initial bite
• Low dust output compared to conventional iron-disc pads
• Designed for use with OE and compatible aftermarket calipers
• Both Street and Race Pads are ECE R90 E11 Certified, ensuring no compliance issues

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36040099078

The product you are viewing cross references to these numbers

Two-Piece Floating Front Brake Disc – 350 x 34mm
Sold as a pair

High-performance two-piece floating front brake disc upgrade for Porsche 996.2 GT3, GT3 RS and GT2, plus Porsche 997 GT3 and GT2 models.

Fits:

• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 RS 2003-04
• Porsche 997 MK1 GT3 / GT3 RS 2007-09
• Porsche 997 MK1 GT2 2007-09
• Porsche 997 MKII GT3 / GT3 RS 2010-11
• Porsche 997 MKII GT2 RS 2011-13

Designed for demanding road and performance use, the 9M floating disc combines a high-carbon cast iron slotted rotor with a lightweight CNC-machined aluminium bell. The two-piece floating construction allows the rotor to expand more freely as temperatures increase, helping reduce heat-related stress and the risk of distortion.

Why Upgrade to a Two-Piece Floating Brake Disc?

High-performance Porsche braking systems generate considerable heat, particularly during repeated heavy braking.

A floating disc allows controlled movement between the iron rotor and aluminium bell as temperatures change. This helps accommodate thermal expansion and reduces stress within the assembly compared with a rigid one-piece design.

Benefits include:

• Improved management of thermal expansion
• Reduced heat transfer into the centre bell
• Lower risk of heat-related distortion and vibration
• Consistent braking during repeated heavy use
• Lightweight aluminium bell construction
• Replaceable rotor-ring design
• Suitable for performance road use

72-Vane Cooling Design

Each rotor incorporates 72 internal cooling vanes designed to efficiently move air through the disc.

Improved airflow helps dissipate heat generated during braking, assisting with temperature control during repeated high-speed stops and demanding driving.

CM-250 High-Carbon Iron Rotors

The rotor rings are manufactured from CM-250 formulated high-carbon alloy cast iron, selected for its strength and durability at elevated braking temperatures.

The rotor rings are also heat treated to relieve internal stresses within the material. This helps improve dimensional stability and reduces the likelihood of deformation and vibration through repeated heating and cooling cycles.

Slotted Rotor Surface

The slotted friction surface is designed for high-performance road applications.

Slots help maintain a clean contact surface between the brake pad and disc while allowing gases, dust and debris to escape from the braking surface, promoting consistent pad-to-disc contact.

CNC-Machined Aluminium Bells

The centre bells are CNC machined from 6061-T6 aluminium before being hard anodised for additional surface protection and durability.

Using aluminium for the centre bell also helps reduce unnecessary rotating and unsprung mass compared with an equivalent all-iron construction.

Disc Dimensions

• Diameter: 350mm
• Thickness: 34mm

Porsche 996 GT3 / GT2 & 997 GT3 / GT2 Floating Front Brake Discs

Two-piece floating brake discs are an excellent upgrade for high-performance Porsche braking systems where heat management, durability and consistent braking performance are priorities.

The 9M 350x34mm floating front brake disc combines a high-carbon iron friction ring with a lightweight 6061-T6 aluminium bell and 72-vane internal cooling design. This makes it particularly suitable for Porsche GT3, GT3 RS and GT2 models subjected to enthusiastic road driving and repeated high-temperature braking.

For owners searching for Porsche 996 GT3 brake upgrades, 997 GT3 floating front discs or replacement two-piece GT2 brake rotors, the 9M system provides a performance-focused alternative to conventional brake disc construction.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M99735140990

The product you are viewing cross references to these numbers

Front brake disc and bell assembly.
362 x 225 x 32mm Disc



Fits
Porsche 996 Gen 2 GT3 1999-2005
Porsche 997 Gen 1 GT3 2006-2009

Comes as a corner set to overhaul and upgrade the front brakes of your GT3. This includes bell, disc, stainless steel bolts and bobbins and the caliper spacer to allow fitment

Note:
The photo may not represent actual item e.g could be of a LH disc when ordering a RH.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DIA2146X273S36

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).

350mm diameter and thickness is 34mm
The radial depth is 60 mm - PFC 7819 brake pad is mandatory to go with this application. 

This Product Fits:

Porsche 996 2001-05 GT2 / GT3 / RS Front
Porsche 997 2005-10 GT3 / RS Front Steel discs

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

350.068.6

The product you are viewing cross references to these numbers

Rear brake disc and bell kit.
360x28mm Disc



Fits
Porsche 996 Gen 2 GT3 2003-2005
Porsche 997 Gen 1 GT3 2006-2009

Complete set to overhaul and upgrade the rear brakes of your GT3.
This includes bells, discs, stainless steel bolts and bobbins and the caliper spacers to allow fitment

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DKR2175X767

The product you are viewing cross references to these numbers

Replacement floating brake disc rotor, PFC Direct Drive V3, Slotted Road disc.

350mm diameter and thickness is 34mm
The radial depth is 60 mm

Fits:

Porsche 996 2001-05 GT2 / GT3 / RS Front
Porsche 997 2005-10 GT3 / RS Front Steel discs
Replacement brake disc for PFV Direct Drive V3 350.068.63 and 350.068.64

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

350.34.0060.4

The product you are viewing cross references to these numbers