do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Your Vehicle // Porsche // 996 (911) (1997-2005) // 996 TURBO 2000-05
- Accessories
- Brakes
- Chassis / Bodywork
- Clothing & Gifts
- Electrical & Relays
- Engine Cooling
- Engine Electrical
- Engine Rebuild Parts
- Engine Tuning
- Exhausts
- Exterior Styling / Spoilers
- Gearbox / Transmission
- Heating / Air Conditioning
- Hydraulics
- Incar / Multimedia
- Interior & Accessories
- Lighting
- Mats & Carpets
- Motorsport and Off-Road
- Parts for Other Cars
- Pedal Cluster
- Rubber Seals
- Seats & Seat Belts
- Service Parts
- Special Offer Parts
- Steering Parts
- Suspension & Axle
- Suspension Upgrades
- Tyres
- Wheel Accessories
- Wheels
Shock Absorber Parts REAR
REAR shock absorber top mounts fitting kit.
Restore the precise ride quality and confident handling your Porsche 996 911 Carrera was built to deliver. Over time, shocks gradually wear down, making changes in handling and comfort hard to notice until performance begins to fade. This complete shock absorber top mounts fitting kit nearly everything you need to replace your worn components—shock mounts, bump stops, dust boots, and all necessary hardware.
Fits:
Porsche 996 3.4L Carrera
Porsche 996 3.6L Carrera
Porsche 996 3.6L Carrera S
Porsche 996 3.4L Carrera 4,
Porsche 996 3.6 Carrera 4,
Porsche 996 3.6 Turbo,
Porsche 996 3.6 Turbo S
With fresh shocks installed, you can expect:
Sharper, more responsive handling Improved ride comfort and stability Reduced braking distances More even tire wear
Note: Coil springs are not included and can be purchased separately if needed. The original washers and spacers can typically be reused unless they show signs of damage upon inspection.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633305903
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Cars M030 / IX73 / IX74 / C4S
Genuine Porsche parts including shock absorber Bellow, Bump Stop, Supporting plate, Compensating plate, Washers & Nut.
Price is for EACH SIDE so for both sides you will need to order 2 kits. Please also add top mounts if you required them
Fits:
Porsche 996 C2 1998-05
Porsche 996 C4 1998-05
Porsche 996 C4S 2001-05
Porsche 996 Turbo 2001-05
Parts Diagram ref No's 3, 4, 5, 7, 8, 9, 10.
Please note: this kit will come with 2 sets of compensating plates (0.5 and 4mm) you will only need one but we are unable to tell you which is fitted on your car. You are welcome to return unused compensating plates for refund.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT12A
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Refresh rear end precision and ride comfort with this OE Match pair of rear suspension top mounts for Porsche 996. These mounts use premium rubber and a high-quality bearing interface to control strut movement, cut noise/harshness, and maintain correct geometry under load. Ideal when replacing rear dampers or chasing knocks, creaks, tramlining or uneven tyre wear. Supplied as a matched left/right pair for consistent handling.
Fits:
Porsche 996 C2 / C4 / C4S 1998 - 2005
Porsche 996 Turbo / GT2 2001 - 2005
Porsche 996 GT3 MKI
Diagram ref no 2
Manufactured using high-quality forged aluminium and fitted with durable rubber bushes and ball joints, they ensure excellent suspension response, ride comfort, and long-term reliability. Ideal for eliminating unwanted steering vibration, uneven tyre wear, or suspension noise.
• Position on Vehicle: Rear suspension – both upper shock absorber/strut mount positions.
• Cross-Reference / Alternative Numbers: 2 × 996 333 059 03 (each mounted left & right)
• Applications: Ideal for full rear suspension overhaul where both mounts are being replaced for uniform performance.
Replacing both sides together avoids mismatched performance, where one side’s mount is new and the other is still worn — leading to inconsistent handling, uneven ride feel and asymmetric noise. A full set ensures true rear-suspension balance, restored comfort and dependable stability.
When to replace both:
• One side already shows wear – replace both to maintain symmetry.
• Rear shock/strut replacement performed on both sides – pair with mounts for full service.
• High-mileage vehicle where both mounts are likely nearing end-of-life.
• You want consistent ride and handling across both rear corners.
• To avoid replacing the second side shortly after the first, saving downtime and labour.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633305903
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
Fits:
Porsche 996 1999-04
These shock mounts use high strength hardened steel spherical bearings and are direct replacements for the factory mounts. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.
Porsche used spherical bearings on the 997 GT3 and Cup Cars. We went one step further and added larger bearings and weather-seals to ensure longevity.
Fully Weather Sealed
We've designed in weather seals to keep dirt out and extend product life. This is the only shock mount suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
Improved Shock / Coilover Performance
The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings. This is important because:
The factory rubber acts as a spring in series with the shock. This rubber spring-action is completely un-damped and reduces the shocks ability to control the tire contact patch. The spherical bearing allows the damper to do its job and control the contact patch.
These will work with stock springs and coilovers.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2152209
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Shop Securely
12 Month Warranty
Worldwide Delivery
Cars with Standard chassis
Porsche 996 Carrera 1998-05
Porsche 996 Turbo/ GT2 / GT3 1998-05
Porsche 997 C2 / C2S MKI & MKII 2005-12
Porsche 997 C4 / C4S MKI & MKII 2005-012
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633310502
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
Cars with Standard chassis
Porsche 996 Carrera 1998-05
Porsche 996 Turbo/ GT2 / GT3 1998-05
Porsche 997 C2 / C2S MKI & MKII 2005-12
Porsche 997 C4 / C4S MKI & MKII 2005-012
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633310502
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
Cars with M030 / C4S / IX73 / IX74
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 996 Turbo 2001-05
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633310503
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Shop Securely
12 Month Warranty
Worldwide Delivery
Cars with M030 / C4S / IX73 / IX74
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 996 Turbo 2001-05
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633310503
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 993 C2 / C4 / C2S / C4S 1994-98
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 996 Turbo 2001-05
Porsche 997 MKI C2/C2S 2005-08
Porsche 997 Turbo / GT3 2007>>
Porsche 997 MKII 2009>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99333310701
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
The OE MATCH Rear Shock Absorber Bellow 99333310701/1 is an OE-style replacement suspension protection component designed for selected Porsche 911 models across the 993, 996 and 997 generations.
Fits:- Porsche 993 C2 / C4 / C2S / C4S 1994-98
- Porsche 996 C2 / C4 / C4S 1998-05
- Porsche 996 Turbo 2001-05
- Porsche 997 MKI C2/C2S 2005-08
- Porsche 997 Turbo / GT3 2007>>
- Porsche 997 MKII 2009>>
Diagram Ref No 7
Also known as a rear shock absorber dust cover, shock absorber protective boot or suspension damper bellow, this component is designed to protect the shock absorber piston rod and sealing area from dirt, dust, moisture and road contaminants.
The rear shock absorbers play an essential role in controlling suspension movement, maintaining ride stability and ensuring consistent vehicle handling. Their exposed piston rods and sealing surfaces must remain protected from abrasive particles and environmental contamination.
The shock absorber bellow provides a flexible protective covering that extends and compresses with normal suspension movement.
By shielding the damper's working surfaces, the bellow helps reduce the risk of contamination-related damage, premature seal deterioration and unwanted wear.
Manufactured to provide OE-style fitment, this replacement component is suitable for applicable rear suspension assemblies fitted to Porsche 993, 996 and 997 models.
Over time, original shock absorber bellows can become cracked, brittle, torn or dislodged due to ageing, repeated suspension movement, road debris and environmental exposure.
A damaged or missing bellow can leave the shock absorber piston rod vulnerable to dirt, moisture and abrasive contamination, potentially accelerating deterioration of the damper seals.
The OE MATCH replacement offers a practical solution for restoring the original suspension protection arrangement without replacing an otherwise serviceable shock absorber.
Ideal for rear suspension repairs, shock absorber replacement and comprehensive Porsche suspension refurbishment, this component helps preserve the condition and long-term reliability of the rear damping system.
What This Product Does:
The rear shock absorber bellow provides a flexible protective barrier around the exposed section of the shock absorber piston rod.
Its primary purpose is to prevent road contaminants from reaching the damper rod and associated seals while allowing the suspension to move through its normal operating range.
Its key functions include:
- Shock Absorber Protection: Helps protect the rear damper piston rod against exposure to dirt, dust and road debris.
- Moisture Protection: Reduces direct exposure of the shock absorber rod and seal area to rainwater and road spray.
- Dirt and Dust Prevention: Helps prevent abrasive particles from collecting around vulnerable damper surfaces.
- Piston Rod Protection: Shields the exposed rod surface from contamination that could contribute to scratches or damage.
- Seal Protection: Helps reduce the amount of dirt reaching the damper's sealing components.
- Reduced Premature Wear: Supports longer shock absorber service life by limiting contamination-related deterioration.
- Flexible Suspension Movement: Compresses and extends as the shock absorber moves during normal driving.
- Corrosion Risk Reduction: Helps limit environmental exposure around the protected damper components.
- Suspension Maintenance: Provides a replaceable protective component within the rear strut assembly.
- Original Suspension Configuration: Maintains the factory-style protective arrangement around the rear shock absorber.
- OE-Style Fitment: Provides a replacement for damaged or deteriorated original bellows.
Symptoms Of Wear Or Failure:
Rear shock absorber bellows experience constant movement as the suspension compresses and rebounds. Over time, age, temperature changes and environmental conditions can cause the material to deteriorate.
Common symptoms include:
1. Cracked or Split Bellow
Visible cracks or splits in the flexible material indicate deterioration and may allow contaminants to reach the shock absorber.
2. Torn Protective Material
Road debris, incorrect installation or repeated contact with surrounding components can tear the bellow.
A torn cover may no longer provide effective protection across the damper's full range of movement.
3. Hardened or Brittle Material
Ageing and environmental exposure can cause the bellow to lose flexibility.
This increases the risk of cracking when the suspension compresses and extends.
4. Missing Shock Absorber Bellow
An absent bellow leaves the damper piston rod and sealing area directly exposed to road contamination.
5. Loose or Dislodged Cover
A damaged or incorrectly fitted bellow may move away from its intended position, exposing vulnerable shock absorber surfaces.
6. Collapsed or Deformed Bellow
A distorted or permanently compressed cover may fail to extend correctly as the suspension moves.
7. Dirt Accumulation Around the Piston Rod
Visible dirt, grit or road debris on the exposed damper rod may indicate that the protective covering is damaged or missing.
8. Moisture Around the Damper Rod
A compromised bellow can allow additional moisture and road spray to reach the shock absorber.
9. Surface Corrosion on Exposed Components
Prolonged environmental exposure may contribute to corrosion on susceptible unprotected metal surfaces.
10. Scratches or Marks on the Piston Rod
Abrasive contamination can damage the smooth damper rod surface, potentially affecting the seal's service life.
11. Shock Absorber Oil Leakage
Oil around the damper body or piston rod may indicate a damaged internal seal.
A missing or deteriorated bellow can contribute to contamination-related seal wear, but replacing the bellow will not repair an existing oil leak.
12. Deterioration Identified During Suspension Servicing
A damaged bellow is commonly discovered when rear shock absorbers, suspension springs or related components are inspected or replaced.
Why Replacement Matters:
- Replacing a cracked, torn or missing rear shock absorber bellow is an important part of protecting the suspension damping system and reducing the risk of premature shock absorber deterioration.
- The Porsche 911 rear suspension is designed to maintain stable handling, ride comfort and controlled wheel movement across a range of driving conditions.
- The shock absorbers contribute to this performance by controlling suspension compression and rebound.
- A shock absorber contains precision internal components, and its piston rod must move smoothly through the damper's sealing arrangement.
- The protective bellow helps keep road contaminants away from these vulnerable surfaces.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99333310701
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
2 x 99633310502
2 x 99333310701
Cars with Standard chassis
Porsche 996 Carrera 1998-05
Porsche 996 Turbo/ GT2 / GT3 1998-05
Porsche 997 C2 / C2S MKI & MKII 2005-12
Porsche 997 C4 / C4S MKI & MKII 2005-012
Click 'Zoom in' for large parts diagram.
Diagram ref no 7 and 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633310502
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
SET OF 4 PARTS
Cars with M030 / C4S / IX73 / IX74
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 996 Turbo 2001-05
Click 'Zoom in' for large parts diagram.
Diagram ref no 7 and 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633310503
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Shop Securely
12 Month Warranty
Worldwide Delivery
REAR
Fits:
Porsche 996 1998-05
Porsche 996 Turbo 2001-05
Porsche 997 MKI 2005-08
Porsche 997 Turbo 2007-09
porsche 997 GT3 2007>>
Porsche 997 MKII 2009>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633351102
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits Left Or Right.
Fits:
Porsche 996 1998>>2005
Porsche 996 Turbo 2001>>2005
Porsche 997 Carrera MKI 2005>>2008
Porsche 997 Carrera MKII 2009>>2012
Porsche 997 Turbo MKI 2007>>2009
Porsche 997 Turbo MKII 2010>>2013
Porsche 997 GT3 MKI / MKII 2007>>2011
Diagram Ref No 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633351103
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 3.6L / 3.8L 2010-13
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits Left Or Right.
Fits:
Porsche 996 1998>>2005
Porsche 996 Turbo 2001>>2005
Porsche 997 Carrera MKI 2005>>2008
Porsche 997 Carrera MKII 2009>>2012
Porsche 997 Turbo MKI 2007>>2009
Porsche 997 Turbo MKII 2010>>2013
Porsche 997 GT3 MKI / MKII 2007>>2011
Options:
- 0.5 mm
- 4.0 mm
Please Select Below
Diagram Ref No 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9963335110
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 3.6L / 3.8L 2010-13
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear axle.
Fits:
Porsche 996 Turbo 2003>> Coupe
For cars with Turbo sports suspension (option code: X73)
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633398020
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
Shop Securely
12 Month Warranty
Worldwide Delivery
-
cross member wishbone 996 TURBO 2001-05 401-00
-
suspension shock absorber strut 996 TURBO 2001-05 402-00
-
suspension shock absorber strut 996 GT2 2001-05 402-01
-
rear axle, wheel carrier, control arm, wheel hub 996 TURBO 2001-05 501-00
-
rear axle, side section, bracket 996 TURBO 2001-05 501-01
-
shock absorber coil spring 996 TURBO 2001-05 502-00
-
shock absorber coil spring 996 GT2 2001-05 502-01
Porsche Shock Absorber Parts REAR
Keep the rear of your Porsche composed and refined with quality rear shock absorber parts from Design911. Our range includes rear top mounts, bump stops, dust covers and fitting hardware to support correct damper operation, reduce noise and harsh impacts, and help prevent premature shock wear. Whether you are fitting new rear dampers, refreshing a tired suspension or solving rear knocking noises, we supply parts for classic and modern Porsche models to help restore a secure, confidence-inspiring ride.
-
Anti Roll Bar
-
Anti Roll Bar Bushes
-
Anti Roll Bar Bracket
-
Drop Links & Bushes FRONT
-
Drop Links & Bushes REAR
-
Shock Absorbers FRONT
-
Shock Absorber Parts FRONT
-
Shock Absorbers REAR
-
Coil Springs FRONT
-
Coil Springs REAR
-
Track Control Arms FRONT
-
Track Control Arm REAR
-
Wheel Bearings & Kits
-
Hub Nut
-
Wishbones & bushes
-
Cross Member & Parts
-
Duct Spoiler & Air Scoop
-
Wheel Hub / Carrier
-
Side section / Sub frame
-
Powerflex Black Series Bushes
-
Powerflex Polyurethane Bushes
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed