Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Exhaust Package
DesignTek 997 Turbo Sport exhaust with 200 cell HIGH FLOW catalytic converters complete with high flow equal length headers.
Made from high grade T304 stainless steel. DesignTek 997 turbo system fits with original Porsche tail pipes or DesignTek tail pipes.
Fits:
Porsche 997 Turbo 2007>>
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHAUSTKIT97
The product you are viewing cross references to these numbers
- Porsche 997 MK1 TURBO 2007-09
The Fabspeed Supersport Performance Package is a comprehensive performance upgrade designed for the 2006–2009 Porsche 997 Turbo.
Fits:
- Porsche 997 MK1 TURBO 2006-09
Rather than replacing a single component, this package upgrades several key areas of the engine's breathing and exhaust system. It combines a freer-flowing Supersport X-Pipe exhaust, performance headers, Competition Air Intake, Deluxe Quad Style exhaust tips and Fabspeed XperTune Performance Software.
Together, these components are designed to reduce intake and exhaust restrictions, improve exhaust scavenging, enhance turbo response and optimise engine management for the upgraded hardware.
Fabspeed quotes gains of approximately 74 wheel horsepower and 78 ft-lb of torque, although actual results will vary depending on vehicle condition, fuel, specification and operating conditions.
Package Includes:
- Fabspeed 997 Turbo Supersport X-Pipe Exhaust System
- Cat-Bypass Pipes for Race configuration
- Fabspeed 997 Turbo Sport Performance Headers
- Fabspeed Deluxe Quad Style Exhaust Tips
- Fabspeed Competition Air Intake
- Fabspeed XperTune Performance Software
What This Product Does:
The package improves the way air enters the engine, how exhaust gases leave the cylinders and how the engine management system responds to the upgraded hardware.
The Supersport exhaust replaces the heavier and more restrictive factory rear exhaust arrangement with a freer-flowing X-pipe system.
This helps:
- Reduce exhaust restriction
- Improve exhaust gas flow
- Produce a stronger performance exhaust sound
- Allow the turbochargers to operate against a less restrictive exhaust system
- Support increased horsepower and torque
Symptoms Of Wear Or Failure:
Because this package replaces and upgrades several systems, potential symptoms depend on which original component has deteriorated.
Ageing factory exhaust components may show:
- Corrosion or rust
- Cracked exhaust pipes or welds
- Blowing or hissing noises
- Exhaust leaks
- Black soot around leaking joints
- Rattling from silencers or catalytic converters
- Reduced engine or turbo response
- Increased exhaust restriction
- Damaged catalytic converter material
- Check Engine Light relating to catalyst efficiency
- Exhaust fumes around the rear of the vehicle
- Loose or damaged mounting points
Why Replacement / Upgrading Matters:
- The 997 Turbo's engine relies on efficient airflow both before and after the turbochargers.
- Restrictions in the intake system make it harder for the engine and turbochargers to draw in sufficient air, while excessive exhaust restriction can work against efficient evacuation of exhaust gases.
- Ageing catalytic converters, damaged silencers, cracked headers or contaminated filters may therefore affect performance and responsiveness.
- Replacing deteriorated components restores system integrity, while upgrading to freer-flowing components can reduce restriction and allow the engine to operate more efficiently.
- The Fabspeed package goes further by combining the hardware upgrades with ECU calibration designed around the improved airflow characteristics. This creates an integrated package rather than fitting individual performance components independently.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR997TRPKGE
The product you are viewing cross references to these numbers
- Porsche 997 MK1 TURBO 2007-09
The Fabspeed Supersport Performance Package is a comprehensive performance upgrade designed for the 2006–2009 Porsche 997 Turbo.
Fits:
- Porsche 997 MK1 TURBO 2006-09
Rather than replacing a single component, this package upgrades several key areas of the engine's breathing and exhaust system. It combines a freer-flowing Supersport X-Pipe exhaust, performance headers, Competition Air Intake, Deluxe Quad Style exhaust tips and Fabspeed XperTune Performance Software.
Together, these components are designed to reduce intake and exhaust restrictions, improve exhaust scavenging, enhance turbo response and optimise engine management for the upgraded hardware.
Fabspeed quotes gains of approximately 74 wheel horsepower and 78 ft-lb of torque, although actual results will vary depending on vehicle condition, fuel, specification and operating conditions.
Package Includes:
- Fabspeed 997 Turbo Supersport X-Pipe Exhaust System
- Sport Catalytic Converters for Street configuration
- Fabspeed 997 Turbo Sport Performance Headers
- Fabspeed Deluxe Quad Style Exhaust Tips
- Fabspeed Competition Air Intake
- Fabspeed XperTune Performance Software
What This Product Does:
The package improves the way air enters the engine, how exhaust gases leave the cylinders and how the engine management system responds to the upgraded hardware.
The Supersport exhaust replaces the heavier and more restrictive factory rear exhaust arrangement with a freer-flowing X-pipe system.
This helps:
- Reduce exhaust restriction
- Improve exhaust gas flow
- Produce a stronger performance exhaust sound
- Allow the turbochargers to operate against a less restrictive exhaust system
- Support increased horsepower and torque
Symptoms Of Wear Or Failure:
Because this package replaces and upgrades several systems, potential symptoms depend on which original component has deteriorated.
Ageing factory exhaust components may show:
- Corrosion or rust
- Cracked exhaust pipes or welds
- Blowing or hissing noises
- Exhaust leaks
- Black soot around leaking joints
- Rattling from silencers or catalytic converters
- Reduced engine or turbo response
- Increased exhaust restriction
- Damaged catalytic converter material
- Check Engine Light relating to catalyst efficiency
- Exhaust fumes around the rear of the vehicle
- Loose or damaged mounting points
Why Replacement / Upgrading Matters:
- The 997 Turbo's engine relies on efficient airflow both before and after the turbochargers.
- Restrictions in the intake system make it harder for the engine and turbochargers to draw in sufficient air, while excessive exhaust restriction can work against efficient evacuation of exhaust gases.
- Ageing catalytic converters, damaged silencers, cracked headers or contaminated filters may therefore affect performance and responsiveness.
- Replacing deteriorated components restores system integrity, while upgrading to freer-flowing components can reduce restriction and allow the engine to operate more efficiently.
- The Fabspeed package goes further by combining the hardware upgrades with ECU calibration designed around the improved airflow characteristics. This creates an integrated package rather than fitting individual performance components independently.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR997TSPKGE
The product you are viewing cross references to these numbers
- Porsche 997 MK1 TURBO 2007-09
Fits:
Porsche 997 Turbo
High-Performance Rear Exhaust with sound switch:
● Push the sound-button between:
Switch closed: Deep Sports Turbo Sound
Switch opened: Perfect Racing Sports Turbo Sound
- Incl. 200 Cell Motorsport catalysts
- Complete System made from V2A stainless steel
- More Bh power
- Tail pipes Included
DesignTek 997 Turbo Sport exhaust fitted with 200 cell sports high flow catalytic converters. The system is produced with high flow stainless steel tubing and fixed together with T316 Lsi welded joints. Each bend section is produced by automated CNC plasma cutting equipment and mandrel bending machinery to give the ultimate finish, flow and power.
Please note the remote controlers do not come with batteries. You will have to source them at your own cost. The type is CR2025
For Installation Instructions CLICK HERE
For Wiring Diagram please CLICK HERE
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009707
The product you are viewing cross references to these numbers
- Porsche 997 MK1 TURBO 2007-09
Exhaust System Packages for Porsche | Performance, Precision & Sound
A well-designed exhaust system package is essential for maintaining your Porsche’s performance, efficiency, and distinctive exhaust tone. These complete systems replace worn or restrictive exhaust components with precision-engineered, high-flow assemblies that restore or enhance power delivery and sound quality.
At Design911, we offer a comprehensive selection of exhaust system packages for Porsche models — from classic 911s to modern GT-series vehicles. Each package includes key components such as silencers, manifolds, catalytic converters, and pipework, designed for optimal gas flow, reduced back pressure, and improved throttle response.
Manufactured from premium stainless steel, Inconel, or titanium, our exhaust kits are built for durability, corrosion resistance, and superior acoustic performance. Whether you’re restoring a vintage air-cooled model or tuning your track-ready GT3, these exhaust systems deliver a perfect balance of reliability, performance, and sound.
What Do Exhaust System Packages Do?
An exhaust system package channels exhaust gases away from the engine efficiently while controlling noise and emissions. A properly designed system ensures optimal engine breathing — improving power, torque, and overall efficiency.
Core Functions:
- Directs
exhaust gases safely from the engine.
- Reduces
back pressure to maximise power output.
- Controls
emissions via catalytic converters and mufflers.
- Enhances
exhaust tone for an authentic Porsche sound.
- Optimises gas flow for performance and reliability.
An upgraded exhaust system can also provide weight reduction, improved throttle response, and enhanced driving enjoyment.
Why Do Exhaust Systems Fail?
Over time, even the most durable exhaust systems deteriorate due to constant exposure to heat, vibration, and the elements.
Common Causes of Exhaust System Failure Include:
Corrosion
and rust, especially on mild steel systems.
When exhaust components fail, you may notice rattling sounds, loss of performance, strong fumes, or increased fuel consumption — all signs that replacement is needed.
Why Replace or Upgrade Your Exhaust System?
Replacing or upgrading your Porsche’s exhaust system ensures maximum performance, efficiency, and driving enjoyment.
Key Benefits:
- Restores optimal gas flow and back pressure.
- Improves horsepower and torque.
- Enhances sound and throttle response.
- Reduces weight for improved handling.
- Prevents leaks and emissions issues.
- Crafted from corrosion-resistant, high-grade materials.
- Direct-fit design for Porsche 911, Cayman, Boxster, Panamera, Macan and more.
Whether for performance tuning, restoration, or replacement, Design911’s exhaust system packages deliver the sound, precision, and reliability Porsche owners expect.
Highlights:
- Complete exhaust system packages for all Porsche models.
- Includes manifolds, silencers, catalytic converters, and pipes.
- Manufactured from stainless steel, Inconel, or titanium.
- Engineered for maximum performance and sound.
- Precision-fit designs for simple installation.
- Ideal for performance upgrades or restorations.