Cabrio

Pliable shaft / cable for cabriolet hood.
Fits Left or Right side



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005>

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656171703

The product you are viewing cross references to these numbers

Pliable Shaft / Drive Cable for Cabriolet Hood – fits Left or Right Hand Side
Sold each - 2 required per car

Restore smooth, reliable operation of your Porsche convertible roof with this Pliable Shaft / Drive Cable. Manufactured to OE specifications, this precision-engineered replacement drive cable transfers power from the convertible roof drive motor to the roof transmission mechanism, ensuring both sides of the cabriolet hood operate in perfect synchronisation.

Fits:

• Porsche Boxster 986 2.5L 1997-99
• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche Boxster 986 2.7L 2003-04
• Porsche Boxster S 986 3.2L 2003-04
• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08

Diagram ref no. 3

The flexible drive cable is a vital component within the electric roof mechanism. Over time, repeated operation, wear and contamination can cause the original cable to wear, bind or fail, resulting in slow roof movement, uneven operation or complete loss of drive. Replacing a worn cable helps restore reliable roof operation while preventing unnecessary strain on the roof motor and transmission assemblies.

Whether you're repairing a faulty roof mechanism or carrying out preventative maintenance, this OE Match replacement provides factory-quality fitment and dependable long-term performance.

What Does the Cabriolet Hood Drive Cable Do?

The pliable drive cable transfers rotational force from the roof drive motor to the convertible roof transmission.

Its primary functions include:

• Transmits drive from the roof motor.
• Synchronises roof movement on both sides.
• Enables smooth opening and closing.
• Supports consistent roof operation.
• Maintains correct roof timing.
• Reduces stress on the roof mechanism.
• Ensures reliable electric hood operation.

A correctly functioning drive cable is essential for the safe and smooth operation of the convertible roof system.

Why Replace the Cabriolet Hood Drive Cable?

Convertible roof drive cables are subject to continual movement and mechanical loading throughout their service life.

Common reasons for replacement include:

• Worn internal cable.
• Cable breakage.
• Frayed or damaged cable ends.
• Corrosion.
• Binding within the guide tube.
• Uneven roof movement.
• Roof mechanism repair.
• Preventative maintenance during roof refurbishment.

Replacing worn drive cables helps restore smooth operation and reduces the risk of further damage to the roof mechanism.

Symptoms of a Worn or Failed Drive Cable

Common warning signs include:

• Roof stops moving during operation.
• One side of the roof moves faster than the other.
• Roof becomes misaligned.
• Clicking or grinding noises from the roof mechanism.
• Slow or jerky roof movement.
• Roof motor operates without moving the hood.
• Roof fails to open or close completely.
• Visible wear or damage to the drive cable.

Addressing these symptoms promptly can help prevent more costly repairs to the roof transmission or motor.

Benefits

• Restores smooth convertible roof operation.
• Ensures synchronised movement of the roof mechanism.
• Helps protect the roof motor and transmissions.
• Reduces the risk of roof misalignment.
• Durable construction for long service life.
• Factory-quality fitment.
• Straightforward installation.
• Excellent value OE Match replacement.

Installation Recommendations

For the best results, inspect the complete convertible roof system during installation, including:

• Roof drive motor.
• Roof transmission gearboxes.
• Opposite-side drive cable.
• Roof linkages.
• Pivot points.
• Guide tubes.
• Convertible roof microswitches.
• Roof control module operation.

Where one drive cable has failed due to wear, it is advisable to inspect—or replace—the opposite cable to maintain balanced operation and minimise future repairs.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656171703

The product you are viewing cross references to these numbers

Push rod product reference code 987.561.279.03 for the convertible-top transmission/pivot on Porsche Boxster 987. This precision-formed control rod links the roof linkage to the roof actuator/lever assembly and transfers movement so your soft-top opens, closes and latches cleanly.

Sold individually. 2pcs required per vehicle., fits left or right side. 

Fits:
Porsche 987-1 Boxster 2006*

*NOTE: This part is not compatible with 2005 Boxster models. For 2006 Boxster's, compatibility depends on your vehicle's VIN...

- 2.7L non-S models: Compatible only with VINs from F98-6U702823 onward
- 3.2L S models: Compatible only with VINs from F98-6U722146 onward

If your VIN is earlier than the numbers listed above, this part will not fit your vehicle - you'll need the earlier version instead (98756127902). Unsure about fitment? Feel free to contact us with your VIN, and we’ll be happy to confirm the correct part for you.

Porsche 987-1 Boxster 2007-08

Porsche 987-2 Boxster 2009-12 

Why replace this push rod?

• Broken/ sheared plastic ball/socket — a frequent failure mode. When the white plastic ball or cup fractures the linkage can detach or move incorrectly, causing the roof to jam, mis-align or fail to latch. Forum reports show this is a common and recurring issue on 986/987 Boxsters.
• Wear and play — worn pivots or loosened joints produce excess movement that causes the roof to mis-index, make clunks, or fail to fully engage the latches.
• Bent or corroded rod — impact or corrosion can change geometry so the roof mechanism binds or the hood doesn’t seal flush.
• Prevent secondary damage — a failing push rod may cause added stress to adjacent linkages, actuators or latch components. Replacing a worn/broken push rod early prevents more expensive repairs later.

Common symptoms that indicate replacement is needed

• Roof won’t fully open or close; operation stalls.
• Roof handle/actuator feels loose or has excessive play.
• Loud clunking or grinding noises during roof travel.
• Roof latches don’t engage or the soft-top sits misaligned.
• Visible crack or missing plastic ball/socket at the rod ends.

Diagram ref. 4. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756127903

The product you are viewing cross references to these numbers

Roof Sealing Tape.

Fits:
Porsche 986 Boxster (Hardtop Roof) 1997>>2004
Porsche 987.1 Boxster (Hardtop Roof) 2005>>2008
Porsche 987.2 Boxster (Hardtop Roof) 2009>>2012
Cars With Option Codes:
550 - Hardtop

Porsche 993 Carrera CABRIO 1994>>1998

Diagram Ref No 34

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004320329

The product you are viewing cross references to these numbers

Socket head bolt – secures the slide rail to the water drain plate in the convertible top stowage compartment, where the roof folds for storage.

Sold individually; x4 required per vehicle. 

Fits:
Porsche 987 Boxster 2005-12

Diagram ref. 28.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006737609

The product you are viewing cross references to these numbers

Stop for convertible top stowage compartment - various thicknesses. 

 

Fits:
Porsche Boxster 987 2005-12 - All models. 

Click 'Zoom in' for large parts diagram.
Diagram ref no 19