Cabrio

Cabriolet Hood (B) Pillar Seal.

 
Left or Right side

Fits:
Porsche 987 Boxster 2005-08
Porsche 987 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram Ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756112

The product you are viewing cross references to these numbers

Assembly kit for roofliner.

Fits:
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756194300

The product you are viewing cross references to these numbers

Cabriolet Hood Roof Slide.

Fits:
Porsche 987 Boxster MKI 2005-08
Porsche 987 Boxster MKII 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9875616

The product you are viewing cross references to these numbers

Cabriolet hood roof top push rod

Fits:
Porsche 987 MK1 Boxster 2005 - 08
for cars with chassis number from
986U7 02823>>
986U7 22146>>

Porsche 987 MK2 Boxster 2009>>

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756127903

The product you are viewing cross references to these numbers

Cabriolet hood with heated rear screen.
Porsche 987 Boxster

Fits
Porsche 987 Boxster 2005 - 2012

Headlining need to be reused from old hood or ordered separately.

Original version:
This soft top is the same as the OEM's version, i.e. the original factory-fitted version.

Information on the rear window:
The soft top is supplied with an integrated, heated glass rear window.
The existing cables to be re-used

Material
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.
Just as with the original hood, we use a special machine to weld a tape over the seams on the inside of the hood.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame, seals and headliner - which are to be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756190300

The product you are viewing cross references to these numbers

OE Match plastic replacement end for the cabriolet roof push rod on Porsche 986 and 987 Boxster models. This is the plastic end that commonly breaks away, not a complete metal push rod.

Fits

• Porsche Boxster 986 2.5L 1997–99
• Porsche Boxster 986 2.7L 1999–02
• Porsche Boxster S 986 3.2L 1999–02
• Porsche Boxster 986 2.7L 2003–04
• Porsche Boxster S 986 3.2L 2003–04
• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08
• Porsche Boxster 987 MKII 2.9L 2009–12
• Porsche Boxster S 987 MKII 3.4L 2009–12
  
  

Suitable for push rod assemblies 98756127900, 98756127901, 98756127902, 98756127903 and 98656127902. Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram: fits onto part number 4

What This Product Does

The plastic end provides the push rod connection within the folding-roof linkage. Replacing a fractured end repairs this connection without treating the component as a complete rod assembly. The remaining rod and adjoining mechanism should be inspected to establish whether an end-only repair is appropriate.

Functions

• Replaces the breakaway plastic portion of the roof push rod.
• Reconnects the rod to its associated roof linkage.
• Allows an end-only repair where the remaining assembly is serviceable.
  
  

Technical Details

• Brand: OE Match.
• Component material: plastic.
• Compatible push rod references: 98756127900, 98756127901, 98756127902, 98756127903 and 98656127902.
  
  

Symptoms of Fault

A visibly fractured or detached plastic end is a direct reason for inspection. Uneven roof travel, interrupted movement or abnormal linkage noise can also warrant checking this connection, but these symptoms do not establish that the end alone is faulty.

Why Replacement Matters

A broken end leaves the affected push rod disconnected from its linkage. Renewing the damaged plastic component addresses that connection, provided the rod and surrounding mechanism remain suitable for reuse. Investigate the cause of breakage before operating the roof again rather than assuming a new end resolves every underlying fault.

FAQs

Is this the complete push rod?
No. It is the replacement plastic end only.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756127902

The product you are viewing cross references to these numbers

Convertible Roof Clamping Piece.
This retaining component helps locate the associated covering or roofliner section, with separate left-hand and right-hand versions.

Fits:

• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08
• Porsche Boxster 987 MKII 2.9L 2009-12
• Porsche Boxster S 987 MKII 3.4L 2009-12

Diagram Ref No 12 

What Is This Part?

The clamping piece is a small retaining component within the convertible top covering and roofliner assembly. It holds the associated section of material or trim at its attachment point, helping maintain its intended position as the roof opens and closes. The left-hand and right-hand pieces serve their respective sides of the roof assembly. During covering or headlining repairs, their condition should be checked alongside the surrounding material and fittings.

What Does This Part Do?

• Retains the covering: Holds the associated roof covering or liner section at its designated attachment point.
• Maintains positioning: Helps keep the surrounding material or trim correctly located.
• Limits local movement: Helps prevent the retained section from becoming loose at the clamping point.
• Supports roof repairs: Replaces a damaged or missing original clamp while retaining the existing attachment arrangement.

Why Replace This Part?

A fractured, distorted or worn clamp may no longer hold the associated material securely. Replacing a confirmed defective piece restores that attachment point and allows the covering or liner to be positioned correctly during refitting.

Loose material does not automatically mean the clamp has failed. Check the nearby covering, tension components, cords, clips and mounting hardware for damage or incorrect seating before deciding which parts need renewal. An intact clamp does not need replacing solely because the roof covering is being removed.

When to Replace This Part?

• Visible damage: The original clamp is split, fractured or distorted.
• Missing component: The intended clamping point has no retaining piece.
• Poor retention: The clamp no longer holds its associated material securely after correct seating has been checked.
• Local movement: Covering or headlining shifts near the attachment point and inspection confirms clamp damage.
• Damage found during repairs: Removal of the covering or liner exposes wear that prevents secure refitting.

Where Is This Part Fitted?

Location: Within the convertible top covering and roofliner assembly, at the corresponding left-hand or right-hand retaining position.

FAQs

• Are both sides supplied together? The numbers identify separate left-hand and right-hand versions, not a confirmed pair. Select the part number for the side being repaired.
• Is this a complete roofliner? No. It is a retaining component used within the roof covering and headlining assembly.
• Are other roof fittings included? No additional covering, tension wire, cord or installation hardware is specified with this component.
• Does fitting require roof dismantling? Access may involve releasing or adjusting part of the covering. Follow the appropriate Porsche workshop instructions for the vehicle and roof assembly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9875615

The product you are viewing cross references to these numbers

Convertible roof top drive gears incl. central pinon in plastic (Pair). 

This is a pair of complete replacement gears in plastic incl. central pinion in plastic (no need to retain factory metal pinion from the old broken gear) for both the LEFT and RIGHT convertible top drive mechanism transmissions.

The angle of the teeth are from left to right on the LEFT gear and right to left on the RIGHT gear.

Fits:
Porsche 986 Boxster 2000>>
Porsche 987 Boxster

Click 'Zoom in' for large parts diagram.
Fits to no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9875611800X

The product you are viewing cross references to these numbers

Convertible soft top ball pin fitting kit.

Fits:
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756192500

The product you are viewing cross references to these numbers

Convertible soft top tension rope.

Fits:
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756177301

The product you are viewing cross references to these numbers

Convertible soft top tension wire.

Fits:
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756191500

The product you are viewing cross references to these numbers

Convertible soft top tension wire.

Fits:
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756191500

The product you are viewing cross references to these numbers

Convertible Tension Wire.
Sold Each.
x2 Required Per Car.
Fits Left And Right.

Fits:
Porsche 987 Boxster / Boxster S MKI 2005>>2008
Porsche 987 Boxster / Boxster S MKII 2009>>2012

Diagram Ref No 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756142100

The product you are viewing cross references to these numbers

Convertible Top Cable, transmission to motor.

Fits:
Porsche 987.1 Boxster 2007-08 with chassis no:
F 98-7T700 251>>
F 98-7T720 276>>
F 98-7T710 141>>
F 98-7T730 069>>

Porsche 987.2 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756110700

The product you are viewing cross references to these numbers

Convertible Top Front Gasket U-Shape.

Fits:
Porsche 987 Boxster 2005-08
Porsche 987 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756132702

The product you are viewing cross references to these numbers

Convertible Top Guide Arm Cover. BLACK.

Fits:
Porsche 987 Boxster MKI & MKII 2005>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 34

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756144

The product you are viewing cross references to these numbers