Cabrio

Convertible roof top drive gears in HD Brass.



These are replacement convertible roof top drive gears incl. central pinon in Heavy duty Brass.
Available for both the LEFT or RIGHT Convertible top drive mechanism transmissions. The angle of the teeth are from left to right on the LEFT gear and right to left on the RIGHT gear.

Fits:
Porsche 986 Boxster from 2000>>
Porsche 987 Boxster

HD Metal Replacement Gear for Left or Right Side Top Transmission Contains:
(1) Brass Gear
(1) Grease packet

• Brass Replacement Gear for Plastic Gear on the Left or Right Side Top Transmission
• Manufactured to match plastic OE gear dimensions for proper fit and operation
• High-strength brass material outlasts fragile plastic
• Withstands electric motor cycling and heat for longer lifespan
• Guaranteed fitment
• Manufactured to match plastic OE convertible top transmission gear dimensions for proper fit and operation
• Withstands motor housing heat and cycling for long lifespan
• 24 Month Unlimited Mileage Warranty

Download the detailed  installation instructions

Click 'Zoom in' for large parts diagram.
Fits to no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9875611

The product you are viewing cross references to these numbers

Convertible top push rod ball cup. Heavy duty steel version. Anti-corrosion finish.
2 required per car. Sold each.

Fits:
Porsche 986 Boxster 1997-04

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656127902PRM

The product you are viewing cross references to these numbers

Convertible top case seal.



Fits:
Porsche 986 Boxster  1997-04

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Convertible top compartment lid.



Fits:
Porsche 986 Boxster 1997-04

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98651401101GRV

The product you are viewing cross references to these numbers

Convertible top guide rail.



Fits:
Porsche 986 Boxster 1997-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656125

The product you are viewing cross references to these numbers

Convertible top retaining strip.

Fits:
Porsche 986 Boxster  1997-04

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656111

The product you are viewing cross references to these numbers

Convertible top retaining strip.

Fits:
Porsche 986 Boxster  1997-04

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656111

The product you are viewing cross references to these numbers

Convertible top sealing element.



Fits:
Porsche 986 Boxster 1997-04

Click 'Zoom  in' for large parts diagram.
Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98651463

The product you are viewing cross references to these numbers

Convertible top transmission.



Fits:
Porsche Boxster 986 all
Porsche 987 Boxster 2005-08 Chassis no F >>986U7 02822 and F >>986U7 22145

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9875611

The product you are viewing cross references to these numbers

Convertible Top Motor Plastic Drive Gears 

Restore the smooth and reliable operation of your Porsche convertible roof with these Factory Style Convertible Top Motor Plastic Drive Gears. Manufactured to OE specifications, these precision-moulded replacement gears are designed to restore the performance of the original convertible roof drive motor without the expense of replacing the complete motor assembly.

Fits:

• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche Boxster 986 2.7L 2003-04
• Porsche Boxster S 986 3.2L 2003-04
• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08

Fits to no 1

You will need to retain the original metal central pinion from the broken factory plastic gear being replaced.
The angle of the teeth are from left to right on the LEFT gear and right to left on the RIGHT gear.

The plastic drive gears are a sacrificial component within the roof drive mechanism, transmitting power from the electric motor to the roof transmission. Over years of operation, the original gears can wear, crack or strip their teeth, causing the roof to operate unevenly or stop functioning altogether. Replacing these gears restores smooth power transfer, helping the roof mechanism operate quietly and efficiently once again.

Ideal for preventative maintenance or repairing a faulty roof motor, these OE Match replacement gears provide factory-quality fitment, dependable durability and excellent value.

What Do the Convertible Top Motor Drive Gears Do?

The plastic drive gears transfer rotational power from the electric roof motor to the convertible roof transmission mechanism.

Their primary functions include:

• Transmitting drive from the roof motor.
• Operating the convertible roof mechanism.
• Ensuring smooth and synchronised roof movement.
• Reducing shock loads within the drive system.
• Helping protect more expensive drivetrain components.
• Supporting reliable opening and closing of the roof.
• Maintaining consistent roof motor performance.

As sacrificial components, the gears are designed to wear before more costly components suffer damage.

Why Replace the Convertible Top Motor Drive Gears?

The roof motor gears are subjected to repeated loading every time the convertible roof is operated.

Common reasons for replacement include:

• Worn gear teeth.
• Cracked plastic gears.
• Stripped drive teeth.
• Roof motor slipping.
• Intermittent roof operation.
• Roof motor running without moving the roof.
• Preventative maintenance.
• Roof refurbishment or motor overhaul.

Replacing worn gears restores the efficiency of the roof motor and can often eliminate the need to replace the complete motor assembly.

Symptoms of Worn or Damaged Roof Motor Gears

Common warning signs include:

• Convertible roof stops during operation.
• Roof motor can be heard running without movement.
• Clicking or grinding noises from the motor.
• Uneven roof operation.
• Roof opens or closes slowly.
• Roof fails to complete its cycle.
• Jerky roof movement.
• Visible damage to the original plastic gears during inspection.

Replacing worn gears promptly can help prevent unnecessary strain on the roof motor and transmission assemblies.

Benefits

• Restores reliable convertible roof operation.
• Eliminates worn or stripped drive gears.
• Helps avoid replacing the complete roof motor.
• Smooth, quiet power transmission.
• Factory-quality fitment.
• Long-lasting, wear-resistant construction.
• Cost-effective repair solution.
• Excellent value OE Match replacement.

Installation Recommendations

For the best results, inspect the complete roof drive system during installation, including:

• Convertible roof drive motor.
• Roof transmission gearboxes.
• Flexible drive cables.
• Roof linkages.
• Pivot points.
• Microswitches.
• Roof control module.
• Roof mounting hardware.

Clean old grease from the gearbox housing and apply a high-quality lubricant suitable for plastic gears during assembly. After installation, ensure the roof mechanism is correctly synchronised and fully tested through several complete operating cycles.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9875611

The product you are viewing cross references to these numbers

Pliable shaft / cable for cabriolet hood.
Fits Left or Right side



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005>

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656171703

The product you are viewing cross references to these numbers

Pliable Shaft / Drive Cable for Cabriolet Hood – fits Left or Right Hand Side
Sold each - 2 required per car

Restore smooth, reliable operation of your Porsche convertible roof with this Pliable Shaft / Drive Cable. Manufactured to OE specifications, this precision-engineered replacement drive cable transfers power from the convertible roof drive motor to the roof transmission mechanism, ensuring both sides of the cabriolet hood operate in perfect synchronisation.

Fits:

• Porsche Boxster 986 2.5L 1997-99
• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche Boxster 986 2.7L 2003-04
• Porsche Boxster S 986 3.2L 2003-04
• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08

Diagram ref no. 3

The flexible drive cable is a vital component within the electric roof mechanism. Over time, repeated operation, wear and contamination can cause the original cable to wear, bind or fail, resulting in slow roof movement, uneven operation or complete loss of drive. Replacing a worn cable helps restore reliable roof operation while preventing unnecessary strain on the roof motor and transmission assemblies.

Whether you're repairing a faulty roof mechanism or carrying out preventative maintenance, this OE Match replacement provides factory-quality fitment and dependable long-term performance.

What Does the Cabriolet Hood Drive Cable Do?

The pliable drive cable transfers rotational force from the roof drive motor to the convertible roof transmission.

Its primary functions include:

• Transmits drive from the roof motor.
• Synchronises roof movement on both sides.
• Enables smooth opening and closing.
• Supports consistent roof operation.
• Maintains correct roof timing.
• Reduces stress on the roof mechanism.
• Ensures reliable electric hood operation.

A correctly functioning drive cable is essential for the safe and smooth operation of the convertible roof system.

Why Replace the Cabriolet Hood Drive Cable?

Convertible roof drive cables are subject to continual movement and mechanical loading throughout their service life.

Common reasons for replacement include:

• Worn internal cable.
• Cable breakage.
• Frayed or damaged cable ends.
• Corrosion.
• Binding within the guide tube.
• Uneven roof movement.
• Roof mechanism repair.
• Preventative maintenance during roof refurbishment.

Replacing worn drive cables helps restore smooth operation and reduces the risk of further damage to the roof mechanism.

Symptoms of a Worn or Failed Drive Cable

Common warning signs include:

• Roof stops moving during operation.
• One side of the roof moves faster than the other.
• Roof becomes misaligned.
• Clicking or grinding noises from the roof mechanism.
• Slow or jerky roof movement.
• Roof motor operates without moving the hood.
• Roof fails to open or close completely.
• Visible wear or damage to the drive cable.

Addressing these symptoms promptly can help prevent more costly repairs to the roof transmission or motor.

Benefits

• Restores smooth convertible roof operation.
• Ensures synchronised movement of the roof mechanism.
• Helps protect the roof motor and transmissions.
• Reduces the risk of roof misalignment.
• Durable construction for long service life.
• Factory-quality fitment.
• Straightforward installation.
• Excellent value OE Match replacement.

Installation Recommendations

For the best results, inspect the complete convertible roof system during installation, including:

• Roof drive motor.
• Roof transmission gearboxes.
• Opposite-side drive cable.
• Roof linkages.
• Pivot points.
• Guide tubes.
• Convertible roof microswitches.
• Roof control module operation.

Where one drive cable has failed due to wear, it is advisable to inspect—or replace—the opposite cable to maintain balanced operation and minimise future repairs.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656171703

The product you are viewing cross references to these numbers

Roof Edge Trim Cover.



Fits:
Porsche 986 Boxster 1997-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98650486

The product you are viewing cross references to these numbers

Roof Sealing Tape.

Fits:
Porsche 986 Boxster (Hardtop Roof) 1997>>2004
Porsche 987.1 Boxster (Hardtop Roof) 2005>>2008
Porsche 987.2 Boxster (Hardtop Roof) 2009>>2012
Cars With Option Codes:
550 - Hardtop

Porsche 993 Carrera CABRIO 1994>>1998

Diagram Ref No 34

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004320329

The product you are viewing cross references to these numbers

Safety belt strap roof frame. 



Fits:
Porsche 986 Boxster / Boxster S - 1997 to 2002

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656197

The product you are viewing cross references to these numbers

Threaded Plate For Cabriolet Hood Tension Rope.
Sold Each.

x2 Required Per Car.

Fits:
Porsche 986 Boxster 1997>>2004

Diagram Ref No 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656191700

The product you are viewing cross references to these numbers