Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Cabrio
Cabriolet Roof Push Rod - fits Left and Right Hand Side
Sold each - 2 required per car
Restore smooth and reliable operation of your Porsche
Boxster convertible roof system with this OE Match Cabriolet Roof Push Rod.
Designed specifically for the Porsche 986 Boxster, this important component
forms part of the convertible roof transmission mechanism, helping transfer
movement from the roof drive system to the roof frame itself.
Fits:
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Diagram ref no 4
The push rod plays a critical role in ensuring the convertible top opens and closes correctly. As the roof mechanism operates, the push rod helps coordinate the movement of the roof frame, clamshell and associated linkage components, ensuring smooth and synchronized operation.
Over time, wear within the roof mechanism, excessive operating loads or ageing components can cause the push rod to bend, wear or fail. Replacing worn roof linkage components helps restore proper roof function and prevent further damage to the convertible roof system.
Manufactured to OE Match standards, this replacement push rod provides the correct fitment, strength and reliability required for long-term operation.
What Does the Cabriolet Roof Push Rod Do?
The roof push rod forms part of the convertible roof linkage system.
Its primary functions include:
- Transferring movement through the roof mechanism
- Synchronising roof operation
- Supporting roof opening and closing
- Maintaining correct roof alignment
- Assisting clamshell movement
- Supporting smooth roof operation
- Helping prevent roof mechanism binding
The push rod is an essential component in ensuring the roof operates safely and correctly.
Why Do Cabriolet Roof Push Rods Fail?
Convertible roof systems contain numerous moving parts that are subjected to repeated operating cycles.
Common causes of failure include:
- Wear within the roof mechanism
- Excessive operating loads
- Linkage misalignment
- Roof transmission problems
- Fatigue from repeated operation
- Corrosion Accidental roof obstruction
- Age-related deterioration
As wear develops elsewhere in the system, additional stress can be placed on the push rod assembly.
Symptoms of a Failing Roof Push Rod
Common signs of failure include:
- Roof operating unevenly
- Roof becoming stuck during operation
- Clicking or knocking noises
- Roof misalignment
- One side of the roof moving incorrectly
- Convertible top failing to open or close fully
- Excessive movement within the roof mechanism
- Visible damage or bending of linkage components
Prompt replacement helps prevent further damage to the roof transmission system.
When Should the Push Rod Be Replaced?
Replacement is recommended when:
- Roof operation becomes uneven
- Linkage damage is visible
- Roof repairs are being carried out
- Roof transmission components are replaced
- Convertible roof alignment issues occur
- Roof mechanism noises develop
- The vehicle is undergoing restoration
- Preventative maintenance is being performed
Many Porsche specialists inspect linkage rods whenever roof system repairs are undertaken.
Why Replacement Matters
A worn or damaged push rod can affect the entire roof operating system.
Benefits of replacement include:
- Smoother roof operation
- Improved roof alignment
- Reduced stress on roof motors and transmissions
- Improved reliability
- Prevention of further roof mechanism damage
- Correct roof opening and closing operation
- Restoration of factory functionality
- Improved ownership experience
Replacing worn linkage components early can help avoid more expensive roof system repairs.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656127902
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04

Fits:
Porsche 986 Boxster 1997-04
Left or right.
Please select below.
Diagram ref no 10.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9865615
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-06*
*Important Fitment Information: This component was fitted to all Porsche 986 Boxster models, but only early 987 Boxster models. During the 2006 model year, Porsche introduced a revised version.
For 987 models, this part fits up to VIN:
98-6U702822 (2.7L Europe / RoW)
98-6U722145 (Boxster S Europe / RoW)
98-6U712007 (2.7L North America)
98-6U731340 (Boxster S North America)
Vehicles produced after these VIN numbers require the later version.
This product supersedes Porsche's old part numbers:
- 986 561 479 01 (left) / 986 561 4780 01 (right)
Click 'Zoom in' for large parts diagram.
Diagram ref no 9.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9875614
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-06*
*Important Fitment Information: This component was fitted to all Porsche 986 Boxster models, but only early 987 Boxster models. During the 2006 model year, Porsche introduced a revised version.
For 987 models, this part fits up to VIN:
98-6U702822 (2.7L Europe / RoW)
98-6U722145 (Boxster S Europe / RoW)
98-6U712007 (2.7L North America)
98-6U731340 (Boxster S North America)
Vehicles produced after these VIN numbers require the later version.
This product supersedes Porsche's old part numbers:
- 986 561 479 01 (left) / 986 561 4780 01 (right)
Click 'Zoom in' for large parts diagram.
Diagram ref no 9.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9875614
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08

Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005>>
Porsche 996 1998-05
Porsche 997 2005>>
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09

Fits:
Porsche 986 Boxster 1997-04
Diagram ref no 17.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656119103
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Ensure flawless convertible top operation on your Porsche Boxster (986) by replacing the critical tension cable with our high quality OE Match version.
Fits:
Porsche 986 Boxster 1997-04
Diagram ref no 17.
Why Replace This Part?
Over time the tension cable in the convertible top system can stretch, fray or break. When this happens you may experience a roof that fails to latch properly, uneven movement, or loud mechanical noises. Replacing with a proper OE Match cable ensures the linkage remains tight and the roof mechanism functions as originally designed.
Key Features & Benefits:
- Specifically designed for the convertible roof mechanism of 1997-2004 Boxster models, ensuring correct length, routing and performance.
- Crafted from durable materials engineered to resist fatigue and wear typical in convertible-top linkages helps prevent roof latch failure, mis-alignment or sagging.
- Helps restore smooth, quiet roof operation and protects the linkage system from further damage ideal for maintenance or full restoration of the Boxster convertible top system.
- OE Match alternative offers excellent value without compromising fit or function compared to genuine parts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656119103
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Left or Right side
Fits:
Porsche 986 Boxster 1997-04
Click 'Zoom in' for large parts diagram.
Diagram Ref: 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656144
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04

Fits:
Porsche 986 Boxster 1997-04
Click 'Zoom in' for large parts diagram.
Diagram ref no 27.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656188100
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Rubber bushing attaches to other end of convertible top push rod (Part# 98656127902).
Stronger and more durable material than OEM.

Fits:
Porsche 986 Boxster 1997-04
Click 'Zoom in' for large parts diagram.
Diagram ref no 27.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656188100
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04

Fits:
Porsche 986 Boxster 1997-04
Click 'Zoom in' for large parts diagram.
Diagram ref no 5.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99992403900
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04

Fits:
Porsche 986 Boxster 1997-04
Click 'Zoom in' for large parts diagram.
Diagram ref no 6.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656177900
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04

Fits
Porsche 986 Boxster 2003 to 2004
Headlining need to be reused from old hood or ordered separately.
Product information:
Replacement cabriolet hood with stitched in, heated rear screen - glass
What's included:
The soft top is supplied with an integrated, heated rear glass window.
The existing cables will be reused.
Material:
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood
Sonnenland canvases comprise of three layers:

Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.
Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.
Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester
100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.
No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656191503
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04

Fits
Porsche 986 Boxster 2000 - 2002
Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic. The headliner is fitted with a zip which is fastened to the hood.
Material:
Headliner material similar to the original material.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656102502
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04

Fits
Porsche 986 Boxster 2003 - 2004
Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic. The headliner is fitted with a zip which is fastened to the hood.
Material:
Headliner material similar to the original material.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656102503
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
The Porsche Convertible Roof Tension Rope is a genuine OEM component designed to keep your soft top operating smoothly and looking its best. This rope maintains the correct tension on the convertible roof fabric, ensuring it folds and closes properly without sagging or misalignment.
Sold Each.
x2 Required Per Car.
Fits Left And Right.
Fits:
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
What This Product Does:
The convertible roof tension rope is an OEM Porsche component used in the soft-top mechanism of Boxster models. Its role is to maintain proper tension and alignment of the convertible roof fabric as it opens and closes.
Functions:
- Keeps the roof fabric stretched correctly to prevent sagging.
- Guides the soft top into position during folding and closing.
- Ensures smooth and reliable roof operation.
- Helps protect the roof frame and fabric from uneven stress or wear.
Symptoms Of A Faulty Tension Rope:
Over time, tension ropes can stretch, fray, or break. Signs that it may need replacement include:
- Sagging or loose convertible top fabric.
- Roof not folding or closing properly.
- Fabric catching or misaligning when opening/closing.
- Frayed or snapped rope visible on inspection.
- Increased strain on roof frame or mechanism.
A worn or broken tension rope not only affects the appearance of your convertible top but can also cause mechanical issues with the roof system if left unchecked.
Diagram Ref No 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98656192100
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
-
convertible top covering roofliner 986 Boxster 1997-04 811-00
-
convertible top frame single parts 986 Boxster 1997-04 811-05
-
driving mechanism, convertible top, convertible top compartm., lid for 986 Boxster 1997-04 811-12
-
hardtop accessories and gaskets 986 Boxster M550 (Hard Top) 1997-04 811-15
-
roll-over bar 986 Boxster 1997-04 812-00
Maintain the luxury and performance of your convertible with Cabrio roof components from Design911. Our range includes complete soft tops, motors, hydraulic lines, seals, cables, and rear windows for Porsche and other European models.
Each part is designed to restore smooth operation, watertight sealing, and factory fit — ensuring your convertible performs as beautifully as it looks.
What These Products Do
Cabrio roof systems:
- Enable
automatic or manual roof operation for open-air driving.
- Provide weather and noise protection when closed.
- Provide weather and noise protection when closed.
- Preserve the vehicle’s original design lines and interior comfort.
Reasons for Failure
- Hydraulic
or electric motor wear from repeated use.
- Leaking
seals or cracked rear windows.
- Faded
or torn fabric from UV and weather exposure.
- Aging mechanical components causing slow or uneven operation.
Why Replace
Restore
watertight performance and quiet operation.
Improve
appearance and resale value.
Prevent
water ingress and electrical damage.