Caliper Seals |Pistons
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP


**Please check the piston size you need as some callipers take two different sizes.
Fits:
Various Models
Price is each seal
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
204872
The product you are viewing cross references to these numbers


Price is each seal
**Please check the piston size you need as some callipers take two different sizes.
Fits:
Various Models
Price is each seal
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1055955
The product you are viewing cross references to these numbers


Price is for each Piston
**Please check the piston diameter you need as some calipers take two different sizes. Sizes shown are the piston outer diameter (OD), The height of the pistons is 32mm
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1055955
The product you are viewing cross references to these numbers
REAR

Porsche 991 3.4L / 3.8L 2012>>
Porsche Carrera GT 2004-06
Porsche 958 Cayenne 2011>>
Porsche 970 Panamera 2010>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 9
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99635191500
The product you are viewing cross references to these numbers
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche Carrera GT
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L
- Porsche Panamera S Hybrid V6 3.0L


Porsche 957 Cayenne 2007-08 Cars with disc diameter 18", brake caliper painted Red (I1LP)
Porsche 957 Cayenne 2009-10 Cars with disc diameter 20", brake caliper painted Yellow PCCB (I1LX)
Porsche 958 Cayenne 2011-14
Porsche 958 Cayenne 2015-17 Cars without Yellow PCCB brake caliper
Porsche 9YA Cayenne 2018>> Cars with disc diameter 19", brake caliper painted Silver (I1LC / I1LI)
Porsche 9YA Cayenne 2018>> Cars with disc diameter 19", brake caliper painted Red RoW (I1ZN / I1ZL)
Porsche 95B Macan 2014>> Cars with disc diameter 18", brake caliper painted Silver (I1LB / I1LF)
Porsche 95B Macan 2014>> Cars with disc diameter 18", brake caliper painted Red (I1LG / I1ZK)
Porsche 95B Macan 2014>> Cars with disc diameter 19", brake caliper painted Yellow PCCB (I1LY)
Porsche 970 Panamera / S / GTS 2010-16
Porsche 970 Panamera Turbo 2011-16
Porsche 970 Panamera DIESEL 3.0L 2012-16
Porsche 970 Panamera HYBRID 3.0L 2012-16
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95535191520
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
- Porsche Cayenne V6 3.0L Petrol 340Hp
- Porsche Cayenne E-Hybrid V6 3.0L V6 340Hp
- Porsche Cayenne S V6 2.9L Petrol 440Hp
- Porsche Cayenne Turbo V8 4.0L Petrol 550Hp
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L
- Porsche Panamera S Hybrid V6 3.0L
- Porsche Panamera V6 3.6L 2WD (310Hp)
- Porsche Panamera 4 V6 3.6L 4WD (310Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD (420Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD Executive
- Porsche Panamera 4S V6 Turbo 3.0L 4WD (420Hp)
- Porsche Panamera 4S V6 Turbo 3.0L 4WD Executive
- Porsche Panamera GTS V8 4.8L 4WD (440Hp)
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L (250Hp)
- Porsche Panamera S E-Hybrid V6 3.0L (416Hp)
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan GTS Petrol 3.0L V6 360Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan GTS Petrol 2.9L V6 380Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
- Porsche Macan Petrol 2.0L 265Bhp
- Porsche Macan S Petrol 2.9L V6 380Bhp
- Porsche Macan GTS Petrol 2.9L V6 440Bhp


Fits:
Porsche 958 Cayenne 2015-18
Cars with Front disc brake 20", Caliper painted yellow/PCCB
Porsche 9YA Cayenne 2018>>
Cars with Front disc brake 20", Caliper painted White (PSCB) (option code: 1ZI)
Cars with Front disc brake 20", Caliper painted Green (PSBC) (option code: 1ZU)
Cars with Front disc brake 21", Caliper painted Yellow (PCCB) (option code: 1ZV)
Cars with Front disc brake 21", Caliper painted Green (PCCB) (option code: 1ZW)
Porsche 971 Panamera 2017-21
Cars with Front disc brake 20", Caliper painted Yellow (PCCB) (option code: 1ZL)
Cars with Front disc brake 20", Caliper painted Acid Green (PCCB) (option code: 1ZQ)
Porsche 971.2 Panamera 2021>>
Cars with Front disc brake PCCB (option code: 1LQ) Cars with Front disc brake, PCCB, high-gloss black (option code: 1LX)
Porsche (9J1) Taycan 2020>>
Cars with Front disc brake 19", yellow/black caliper (option code: 1LQ / 1LX)
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95835131300
The product you are viewing cross references to these numbers
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
- Porsche Cayenne V6 3.0L Petrol 340Hp
- Porsche Cayenne Coupe V6 3.0L Petrol 340Hp
- Porsche Cayenne E-Hybrid V6 3.0L V6 340Hp
- Porsche Cayenne Coupe E-Hybrid V6 3.0L 340Hp
- Porsche Cayenne S V6 2.9L Petrol 440Hp
- Porsche Cayenne Coupe S V6 2.9L Petrol 440Hp
- Porsche Cayenne Turbo V8 4.0L Petrol 550Hp
- Porsche Cayenne Coupe Turbo V8 4.0L Petrol 550Hp
- Porsche Cayenne Turbo S E-Hybrid V8 4.0L 550Hp
- Porsche Cayenne Coupe Turbo S E-Hybrid V8 4.0L 550Hp
- Porsche Panamera V6 3.0L 2WD (330 Hp)
- Porsche Panamera 4 V6 3.0L 4WD (330 Hp)
- Porsche Panamera 4 V6 3.0L 4WD Executive
- Porsche Panamera 4 3.0L Turbocharged V6 Sport Turismo
- Porsche Panamera 4S V6 3.0L 4WD (440 Hp)
- Porsche Panamera 4S V6 3.0L 4WD Executive
- Porsche Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera 4S Diesel V8 4.0L 4WD (422 Hp)
- Porsche Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD Executive
- Porsche Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera Turbo V8 4.0L 4WD (550 Hp)
- Porsche Panamera Turbo V8 4.0L 4WD Executive
- Porsche Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera Turbo S E-Hybrid V8 4.0L 4WD
- Porsche Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive
- Porsche Panamera 2.9L V6
- Porsche Panamera 4 2.9L V6
- Porsche Panamera 4 Sport Turismo 2.9L V6
- Porsche Panamera 4S 2.9L V6
- Porsche Panamera 4S Sport Turismo 2.9L V6
- Porsche Panamera 4 E-Hybrid 2.9L V6
- Porsche Panamera 4 E-Hybrid Sport Turismo 2.9L V6
- Porsche Panamera 4S E-Hybrid 2.9L V6
- Porsche Panamera 4S E-Hybrid Sport Turismo 2.9L V6
- Porsche Panamera GTS 4.0L V8
- Porsche Panamera GTS Sport Turismo 4.0L V8
- Porsche Panamera Turbo S 4.0L V8
- Porsche Panamera Turbo S Sport Turismo 4.0L V8
- Porsche Panamera Turbo S E-Hybrid 4.0L V8
- Porsche Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8
- Porsche Taycan
- Porsche Taycan Sport Turismo
- Porsche Taycan 4 Cross Turismo
- Porsche Taycan 4S
- Porsche Taycan 4S Cross Turismo
- Porsche Taycan 4S Sport Turismo
- Porsche Taycan GTS
- Porsche Taycan GTS Sport Turismo
- Porsche Taycan Turbo
- Porsche Taycan Turbo Cross Turismo
- Porsche Taycan Turbo Sport Turismo
- Porsche Taycan Turbo S
- Porsche Taycan Turbo S Cross Turismo
- Porsche Taycan Turbo S Sport Turismo

Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake.
To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.
Brake fluid should be changed every two years.
The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).
Boiling Point and Viscosity
Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.
Wet Boiling Point - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut.
Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted.
Important Notes
• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.
Find out about Textar product verification here


DOT 4
Having an extremely high boiling point and lower viscosity than required, it meets and greatly exceeds regulatory standards. Also suitable for vehicles with ABS.
Vapour Lock formation
This sort of habit leaves room for the Vapour Lock, the formation of vapour bubbles due to boiling of the brake fluid that replace the normal fluid and are compressed, thereby sending the brake pedal to its fill stoke (spongy pedal). The origin is incident in the porosity of the tubes that make up the braking circuit, which in time draw moisture into the fluid, drastically reducing the boiling point. The result is a reduced braking efficiency.
Brembo Premium Brake Fluid
Brembo Premium brake fluids have a higher boiling point that exceeds the standard, thus offering superior resistance to the Vapour Lock and ensuring braking efficiency even at low temperatures. With high anti-corrosion properties and resistance to oxidation, Brembo brake fluid also allows for long-term unaltered chemical/physical characteristics of the fluid in operating circuit; therefore, preserving its integrity.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
L040
The product you are viewing cross references to these numbers

Brake fluid DOT 4 LV (Low Viscosity) Textar.
Textar DOT 4 LV (Low Viscosity) is especially recommended for use in hydraulic brake and clutch systems of vehicles fitted with ESP, ABS and ASR with a high boiling point and outstanding performance at very low temperatures.
DOT 4 LV (Low Viscosity)
Dry Boiling Point ≥ 260° C
Wet Boiling Point ≥ 165° C
Viscosity at -40C < 750 mm2 /s
Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake.
To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.
Brake fluid should be changed every two years.
The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).
Boiling Point and Viscosity
Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.
Wet Boiling Point - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut. <
Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted.
Important Notes
• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.
Find out about Textar product verification here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95006
The product you are viewing cross references to these numbers


Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake.
To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.
Brake fluid should be changed every two years.
The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).
Boiling Point and Viscosity
Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.
Wet Boiling Point - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut.
Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted.
Important Notes
• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.
Find out about Textar product verification here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95002
The product you are viewing cross references to these numbers

For brake systems and is highly temperature-resistant (up to 1,000°C).
Available in 75ml tube and 5ml sachet
The advantages of Cera Tec:
• Non-conductive and contains no solids
• Suitable for ABS
• Facilitates brake installation
• Reduces brake squealing
• Protects against scoring and corrosion
• Free of copper and acids
• Pressure-resistant / high viscosity
Cera Tec is also suitable for lubricating:• Disc- and drum-brake systems
• Compressors
• Centralised lubrication systems
• Axle bearings
• Chains
• Seat rails
• Sunroof tracks
• Battery terminals
Application:
Apply a thin layer of Cera Tec on the marked sections
Find out about Textar product verification here

Hydra tec lubricant for maintenance work and protection Textar
Available in 180ml Tube, 75ml Tube or 5ml Sachet
The Advantages of Hydra Tec:
- Facilitates the installation of hydraulic brake components
- Tested compatibility with commercially available braking fluids (DOT3, DOT4, DOT4LV, DOT5.1)
- Free of mineral oils and compatible with EPDM rubber
- In addition, running surfaces are protected against corrosion
Hydra Tec is suitable for lubricating:
- Cylinder running surfaces
- Pistons
- Sealing elements
Application:
Apply a thin layer of Hydra Tec on the marked sections.
Note:
Hydra Tec should be applied thinly and evenly.
Never use mineral oils or greases as substitutes.
Do not apply the product on friction surfaces of brake pads or brake discs.
Find out about Textar product verification here


Titanium is a very poor conductor of heat, and reduces the heat transfer by approximately 90%
The standard aluminum brake pistons are light but very heat conductive which means the thermal energy from the brake pad transfers easily to the brake fluid.
The castellated contact edge promotes airflow into the piston cavity and reduces the contact surface with the pad and thus further decreases heat transfer to the brake fluid.
We designed using advanced engineering simulations (FEA) to achieve the same weight than their aluminum counterparts while maintaining superior structural strength.
As opposed to stainless steel pistons, our titanium alloy pieces weigh the same as the original aluminum pistons; and they will never corrode and damage the seals causing the caliper to leak.
Price is per pair of pistons
**Please check the piston diameter you need as some calipers take two different sizes. Sizes shown are the piston outer diameter (OD)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-BKP-
The product you are viewing cross references to these numbers