Shock Absorber Parts REAR

Lift kit spacer set for air suspension 2 inch. 
Set of for Front and Rear suspension

Fits:

Porsche 958 Cayenne - 2010 to 2017

958 Cayenne owners - here's your lift solution. 

For the 958 Cayenne (2010-2017) & Touareg here is a 100% bolt on design. 

This will lift the vehicle 2 inches. Lift kit available in standard and HD version for those in need of heavy duty extreme use. HD version will need spherical sway bar links to retain the front swaybar. Rear air strut spacers.

Kit Includes
Front Strut Extensions x 2
Front Strut Extension Hardware 
Rear Strut Spacers x 4
Rear Strut Hardware1
1/2 inch Subframe Drop Kit Front and Rear
Air Suspension Level Links

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWORG210AIR

The product you are viewing cross references to these numbers

Lift kit spacer set for air suspension 2 inch. 
Set of for Front and Rear suspension

Fits:

Porsche 958 Cayenne - 2010 to 2017

2" lift kit for the second generation, 958 Porsche Cayenne and VW Touareg

Machined from a solid block of 6061 aluminum, these lift kits will never wear out or fail.

This is a direct bolt on lift kit that installs over the top of the OEM Strut in the front and between the upper strut mount and the spring on the rear. Requires removal of front and rear strut assembly. Front struts do not require disassembly.

What's different about our kit vs. the competitors? We include an shock shaft extension that accounts for the spacer that you install between the spring and strut mount. This keeps your spring rate, shock travel, and ride quality the same as OE. This also translates into better performance on the trails.

Strut extensions come with the option for vehicles with and without electronic dampening. To install the connector must be de-pinned, the harness fed through the center of the extension, and then the connector can be reassembled.

Fitment:  
2011-2018 Volkswagen Touareg (with steel coil spring suspension)
2011-2018 Porsche Cayenne (with steel coil spring suspension)

Kit Includes: 
 2 x Front Spacers with Hardware
2 x Rear Spacers  
2 x Rear Shock Extensions
1 x Loctite for Rear Shock Extension

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK20

The product you are viewing cross references to these numbers

Lift kit spacer set 3 inch for cars with steel coil spring suspension.
Set of for Front and Rear suspension

Fits:
Porsche Cayenne (958) 2011-2018  (with steel coil spring suspension)
VW Touareg 2011-2018  (with steel coil spring suspension)

Eurowise 3-inch lift kit for the second generation Porsche Cayenne and VW Touareg

Machined from a solid block of 6061 aluminium, these lift kits will never wear out or fail.

This is a direct bolt on lift kit that installs over the top of the OEM Strut in the front and between the upper strut mount and the spring on the rear. Requires removal of front and rear strut assembly and dropping of both subframes. Front struts do not require disassembly.

What's different about our kit vs. the competitors? We include an shock shaft extension that accounts for the spacer that you install between the spring and strut mount. This keeps your spring rate, shock travel, and ride quality the same as OE. This also translates into better performance on the trails.

Strut extensions come with the option for vehicles with and without electronic dampening. To install the connector must be depinned, the harness fed through the center of the extension, and then the connector can be reassembled.

Kit Includes:
Front Spacers w/ Hardware
(2) Rear Spacers 
(2) Rear Shock Extensions
(1) Loctite for Rear Shock Extension
(1) 1" Subframe Drop Kit

Install at your own discretion, professional installation recommended. We are not responsible for any damages that may occur of improper install and/or use.

NOTE: The physical thickness of the billet spacers do not reflect the actual lift height. So do not be alarmed if your spacer is not 3" thick

Rear shock absorber air spring.

Fits:
For Cars with Air Suspension
Porsche 958 Cayenne - 2011 to 2018
Porsche 958 Cayenne E-Hybrid - 2011 to 2018
Porsche 958 Cayenne Diesel - 2011 to 2018
Porsche 958 Cayenne S Diesel - 2011 to 2018
Porsche 958 Cayenne S V8 - 2011 to 2018
Porsche 958 Cayenne GTS V8 - 2011 to 2018
Porsche 958 Cayenne turbo / turbo S V8 - 2011 to 2018

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95835850

The product you are viewing cross references to these numbers

Shock absorber dust protection boot.

Fits:
Porsche 958 Cayenne 2011-18
cars with Suspension/dampers, standard (option code: 1BA) / standard 2 PASM (option code: 1BH)
cars with Comfort suspension/damping, PASM (option code: 1BZ)
cars with Comfort suspension/damping, steel spring (option code: 1BW)

Click ' Zoom in' for large parts diagram.
Diagram ref no 8 (front) / 9 (rear)


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834350500

The product you are viewing cross references to these numbers

OE Match shock absorber mounting for the Porsche 958 Cayenne, used in front and rear air-suspension assemblies. The supplied diagrams identify reference 95834301820 as a shock absorber bearing for PR:1BK-equipped vehicles.

Fits

• Porsche 958 Cayenne 2011 >> with I1BK

* I1BK - cars with Air Suspension with levelling system and height adjustment (PASM)

Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram reference no: 6

What This Product Does

The mounting supports the shock absorber within its suspension assembly, helping retain the intended position while limiting the transmission of road-induced noise and vibration. It is a mounting component rather than a complete damper or air spring.

Functions

• Supports the shock absorber at its mounting point.
• Helps maintain the damper’s intended position.
• Helps isolate vibration and mounting noise.
  
  

Technical Details

• Product reference: 95834301820.
• Diagram designation: shock absorber bearing.
• Application: FRONT and REAR suspension assemblies.
• Suspension equipment: PR:1BK air suspension with levelling and height adjustment.
• Diagram coverage includes vehicles up to 2014 and from 2015 onwards within the supplied model applications.
• Each supplied assembly diagram specifies quantity 2; this is an assembly requirement, not confirmation of pack contents.
  
  

Symptoms of Fault

A worn mounting may contribute to knocks over uneven surfaces, rattling or increased vibration. Similar symptoms can originate from bushes, links, fixings or the damper itself, so inspect the assembly before selecting replacement parts.

Why Replacement Matters

Renewing a deteriorated mounting addresses wear at the damper support rather than leaving an old component in place during suspension repairs. When changing dampers, inspect the associated mounts and hardware to avoid overlooking another source of noise.

FAQs

Should mounts be checked when replacing dampers?
Yes. Inspect them for wear or damage and renew them where necessary.

Does a knocking noise confirm mounting failure?
No. Other suspension joints and fixings can produce similar noises; diagnosis should come first.

Is it suitable for every 958 Cayenne?
Do not assume universal compatibility. Check reference 95834301820 and the PR:1BK air-suspension requirement against your vehicle.

Check fitment for your specific vehicle (model, year, engine) before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834301820

The product you are viewing cross references to these numbers

Shock Absorber Mounting. REAR

Fits:
Porsche 958 Cayenne 2011>> I1BK
* I1BK - cars with Air Suspension with levelling system and height adjustment (PASM)

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834301820

The product you are viewing cross references to these numbers

Shock absorber plastic support for boot.
Fits: front or rear



Fits:
Porsche 958 Cayenne  2014-18
cars with Suspension/dampers, standard 2 PASM (option code: 1BH)
cars with Comfort suspension/damping, PASM (option code: 1BZ)

Click 'Zoom in' for large parts diagram.
Diagram ref no 6 (front) / 6 (rear)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834350350

The product you are viewing cross references to these numbers

Shock absorber spring insert, Rear.

Fits:
Porsche 958 Cayenne 2011-18
for cars with:
(1BA) Suspension/dampers, standard
(1BH) Suspension/dampers, standard 2 PASM
(1BW) Comfort suspension/damping (steel springs)
(1BZ) Comfort suspension/damping, PASM

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834352300

The product you are viewing cross references to these numbers

Shock absorber spring underlay, Rear.

Fits:
Porsche 958 Cayenne 2011-18
for cars with:
(1BA) Suspension/dampers, standard
(1BH) Suspension/dampers, standard 2 PASM
(1BW) Comfort suspension/damping (steel springs)
(1BZ) Comfort suspension/damping, PASM

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834352100

The product you are viewing cross references to these numbers

Shock Absorber Supporting Mount. REAR Axle.

Fits:
Porsche 958 Cayenne 2011-16
I1BA - Cars with Standard Suspension
I1BW - Cars with Comfort suspension (steel springs)

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95833332701

The product you are viewing cross references to these numbers

Shock Absorber Upper concave washer. Rear axle.

Fits:
Porsche 957 Cayenne 2007-10 (I1BA / I1BW / I1BH)
Porsche 970 Panamera 2010-16 (I475 / I029)

I1BA - for cars with Suspension/dampers, standard I1BH - for cars with Suspension/dampers, standard 2 PASM
I1BW - for cars with Comfort suspension/damping (steel springs)
I475 - for cars with PASM electronic damper control
I029 - for cars with Standard chassis

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95533350400

The product you are viewing cross references to these numbers

Shock Absorber Upper Spring Desk Pad. REAR Axle.

Fits:
Porsche 958 Cayenne 2011-16
I1BA - Cars with Standard Suspension
I1BH - Cars with Standard 2 PASM Suspension
I1BW - Cars with Comfort suspension (steel springs)
I1BZ - Cars with Comfort suspension , PASM

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95833314900

The product you are viewing cross references to these numbers

Shock Absorber Upper Spring Shim. REAR Axle.

Fits:
Porsche 958 Cayenne 2011-16
I1BA - Cars with Standard Suspension
I1BH - Cars with Standard 2 PASM Suspension
I1BW - Cars with Comfort suspension (steel springs)
I1BZ - Cars with Comfort suspension , PASM

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95834352400

The product you are viewing cross references to these numbers

Stop Buffer, Rear. 
The Genuine Porsche Rear Stop Buffer (Part Number 95833313105) is an essential suspension component designed to protect the rear shock absorber assembly and help maintain controlled suspension movement on Porsche Cayenne (958) models.

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17  

Cars With Option Codes:
1BH - Suspension/Dampers, Standard 2 PASM
1BZ - Comfort Suspension/Damping, PASM

Diagram Ref No 8

Manufactured to Porsche's original equipment specifications, this rear suspension bump stop provides progressive cushioning when the suspension approaches the limit of its compression travel. It helps absorb excessive suspension movement caused by heavy loads, uneven road surfaces, potholes and demanding driving conditions.

Positioned within the rear shock absorber assembly, the stop buffer acts as a protective cushioning element, helping prevent harsh metal-to-metal contact and reducing excessive stress on the shock absorber and associated suspension components.

During normal driving, the rear suspension continuously compresses and rebounds to maintain comfort, stability and road contact. When the suspension experiences greater compression, the stop buffer provides additional resistance, helping reduce harsh impacts and protect critical suspension components.

Over time, the original stop buffer can deteriorate due to ageing, repeated compression, moisture, road contaminants and temperature changes. Worn or damaged buffers may lose their ability to cushion suspension movement effectively, potentially resulting in harsher suspension impacts, increased noise and additional wear on surrounding components.

Replacing a deteriorated stop buffer with a Genuine Porsche component helps restore the intended suspension cushioning, maintain driving comfort and protect the rear shock absorber assembly from excessive compression forces.

Ideal for routine suspension maintenance, shock absorber replacement and rear suspension repairs, this genuine Porsche stop buffer provides original equipment fitment and dependable performance.

What This Product Does:
The rear stop buffer, also known as a suspension bump stop or jounce bumper, performs several important functions within the vehicle's rear suspension system.

• Limits Excessive Suspension Compression: Provides progressive resistance as the rear suspension approaches the end of its available compression travel.
• Protects the Shock Absorber: Helps prevent the shock absorber from experiencing harsh mechanical impacts when the suspension compresses heavily.
• Absorbs Suspension Impacts: Cushions the effects of potholes, speed bumps, uneven roads and heavy suspension loading.
• Prevents Harsh Bottoming Out: Reduces the severity of impacts when the suspension reaches its compression limits.
• Maintains Ride Comfort: Helps reduce harsh jolts and vibrations transmitted through the vehicle during extreme suspension movement.
• Protects Suspension Components: Reduces excessive mechanical stress on the shock absorber, mounting points and surrounding suspension assemblies.
• Supports Controlled Suspension Movement: Provides additional resistance under heavy compression to help maintain predictable suspension behaviour.
• Accommodates Vehicle Loading: Helps protect the suspension when carrying passengers, luggage or heavier loads.
• Maintains Factory Suspension Performance: Designed to work with the specified Porsche rear suspension configuration.

Symptoms Of Wear Or Failure:
Rear suspension stop buffers are exposed to repeated compression, road debris, moisture and temperature changes. Over time, these conditions can cause the original material to deteriorate.

Common symptoms of a worn or damaged rear stop buffer include:

• Harsh Suspension Bottoming Out: Heavy jolts or impacts may be felt when driving over potholes, speed bumps or uneven road surfaces.
• Knocking or Thudding Noises: Unusual noises from the rear suspension may occur when the suspension compresses heavily.
• Cracked or Split Buffer: Visible cracking, splitting or deterioration of the cushioning material.
• Crumbling or Disintegrating Material: Ageing material may break apart, leaving fragments around the shock absorber assembly.
• Reduced Suspension Cushioning: The suspension may feel harsher during larger bumps or heavy compression.
• Excessive Suspension Impact: A severely deteriorated or missing buffer may allow harder impacts at the limits of suspension travel.
• Deformed or Compressed Buffer: The stop buffer may become permanently flattened or distorted, reducing its effective cushioning.
• Increased Suspension Vibration: Harsh impacts may transmit additional vibration into the vehicle body.
• Premature Shock Absorber Wear: Repeated bottoming-out events may place additional strain on the shock absorber and its mounting components.
• Visible Missing or Damaged Buffer: Inspection may reveal that the original stop buffer has become detached, broken or completely deteriorated.

Why Replacement Matters:
Replacing a worn or damaged rear suspension stop buffer helps maintain the integrity, comfort and reliability of the vehicle's suspension system.

Key Benefits of Replacement:

• Restores Suspension Cushioning: Re-establishes the protective cushioning effect during heavy suspension compression.
• Helps Prevent Harsh Bottoming Out: Reduces the severity of impacts when the suspension approaches the end of its travel.
• Protects the Rear Shock Absorbers: Helps reduce excessive mechanical stress that may contribute to premature shock absorber damage.
• Maintains Driving Comfort: Minimises harsh jolts and impacts transmitted through the vehicle.
• Reduces Suspension Noise: Helps prevent impact-related knocking or thudding caused by a missing or deteriorated buffer.
• Protects Surrounding Components: Reduces unnecessary strain on suspension mounts and associated components.
• Supports Predictable Suspension Behaviour: Maintains the intended cushioning characteristics during heavy compression.
• Genuine Porsche Quality: Manufactured to the original specifications for the applicable rear suspension assembly.
• Correct Original Equipment Fitment: Designed to match the intended dimensions and installation requirements.
• Supports Long-Term Reliability: Helps prevent avoidable wear caused by excessive suspension impacts.
• Ideal During Shock Absorber Replacement: Provides an opportunity to renew ageing suspension protection components when the rear suspension is dismantled.
• Cost-Effective Preventative Maintenance: Replacing a relatively small protective component may help avoid damage to more expensive suspension parts.

Although the rear stop buffer is a relatively small component, it performs an important protective function within the suspension assembly.

A deteriorated or missing stop buffer can allow harsher suspension impacts, particularly when driving over uneven road surfaces or carrying heavier loads. Repeated excessive compression may place additional stress on the shock absorber and other suspension components.

Replacing the stop buffer with a Genuine Porsche part helps maintain the vehicle's original suspension performance and contributes to improved comfort, durability and long-term reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95833313105

The product you are viewing cross references to these numbers