All Silencers / Mufflers

Exhaust heat shield

Fits:
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98710444500

The product you are viewing cross references to these numbers

Exhaust link pipe, T-piece.

Fits:
Porsche 987.1 Boxster 2.7L / 3.2L 2005-08
Porsche 987C.1 Cayman 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98711135300

The product you are viewing cross references to these numbers

Replacement Rear sport exhaust set with catalytic converters. 

Polished stainless steel.
Equipment with 200 cells cats
Material Stainless Steel

Fits:
Porsche Boxster 987 MKI 2.7L / 3.4L 10/2004-
Porsche Cayman 987C MKI 2.7L / 3.4L 07/2006-

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98722098300S

The product you are viewing cross references to these numbers

 

TUV APPROVED

Fits:
Porsche 987.1 Boxster / Boxster S - 2005 to 2008
Porsche 987.1 Cayman / Cayman S - 2005 to 2008

Ideal for enthusiasts seeking a more conservative sound enhancement, this muffler is particularly suited for those running cat bypass or sport cats who want to avoid excessive noise levels. At low RPMs and during cruising, it delivers a refined, deep tone that remains discreet. Designed to comply with Germany's stringent urban decibel regulations, this is a German Edition muffler built for subtle performance.

DesignTek offers a wide selection of mufflers to suit diverse preferences, ranging from mild, street-friendly options to exotic-sounding sport mufflers and high-intensity race mufflers. The DesignTEk Edition 987.1 street muffler stands apart from conventional aftermarket designs.

Crafted from German V2A - X5CrNi18-10 - 1.4301 (T-304 L) lightweight stainless steel, it incorporates advanced features like double perforated sound absorption tubes in a trapezoidal pattern with variable perforation diameters. This design effectively isolates and dampens unwanted drone frequencies. Additional stamped ribbing on the outer shell further reduces unwanted resonance, achieving superior acoustic performance.
Unlike traditional baffle plates, this design minimizes back pressure, particularly at higher gas velocities, resulting in improved throttle response and enhanced performance across the rev range. When combined with software tuning, upgraded intakes, or additional exhaust modifications, the benefits are even more pronounced.

This muffler offers a subtle factory motorsport sound, making it an excellent choice for those who desire a conservative sport tone. Its reduced decibel output ensures it remains suitable for vehicles equipped with sport cat or cat bypass headers, maintaining an enjoyable sound without becoming overly loud.

Each system undergoes rigorous testing for exhaust gas flow, thermal durability, resistance to cracking, and long-term reliability, ensuring exceptional quality and performance.

Features:

• Increases by 9 HP and 11 TQ
• Weighs 43 lbs. (19.5 Kg)
• German V2A - X5CrNi18-10 - 1.4301 (T-304 L) stainless steel for improved durability
• Includes dual round 3.5” (90mm) tips
• Direct bolt on replacement
• Increased decibels with an exclusive, exotic motorsport sound
• Software programming is not necessary

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

87050

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer Sports Complete with Twin Stainless Steel Tail Pipes . Comes with hangers, gaskets and bolts with nuts for headers connection.

DesignTek sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Complete twin adjaustable stainless steel tails

Made from T304 stainless steel.

Fits:
Porsche Boxster 987 MK1
Porsche Cayman 987C MK1



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606008703

The product you are viewing cross references to these numbers

DesignTek Valvetronic sports exhaust system gives smooth 12Bhp/15 ft-lbs of torque to the wheels with the valves opened, +8HP/10 ft-lbs of torque to the wheels with the valves closed. Made from high quality 14-16 gauge T304 stainless steel, hydro-formed muffler cases, radiuses stressed relieved with 2000 degree ceramic fiber and stainless steel wool packed free flow mufflers.

This unique exhaust configures a dual-tone setup controlled by a key fob which you can switch on the fly. Direct replacement for the factory mufflers and will work with the stock primary pipe and cats or DesignTek primary bypass pipe.

High-Performance Rear Exhaust with sound switch:
● Push the sound-button between:
Switch closed: Deep Sports Turbo Sound

Switch opened: Perfect Racing Sports Sound

Superb sports car sound, throaty and deep with the valves opened, but docile with the valves closed.

This system comes complete with stainless steel tail pipes.

Please note the remote controllers do not come with batteries. You will have to source them at your own cost. The type is CR2025

Fits:
Porsche Boxster 987 GEN1
Porsche Cayman 987c GEN1

For Wiring Diagram please CLICK HERE



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606008704

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer System.

The acoustics of this dual-mode sports exhaust system are dependent on driving style, ranging from standard output during normal road driving to a more aggressive tone during performance use. Modes are selected using a button on the centre console (or 'Sport' mode button on vehicles with optional Sport Chrono Package/Sport Chrono Package Plus). if you need the switch console order part number 99761312900FHM

Please Note:
If the vehicle does not have the factory option of Sport Chrono Package/Sport Chrono Package Plus an extra wire harness is required. Part No.99761290501

Fits:
Porsche 987 Boxster 2005>>
Porsche 987C Cayman 2007>>

For Wiring Diagram please CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98704420001

The product you are viewing cross references to these numbers

Fabspeed Supercup Race Exhaust System

Fabspeed Supercup Exhaust System is a loud and aggressive performance exhaust system designed with track use in mind. This system is a lot lighter than the factory system and flows much better. The Supercup is significantly louder than our Maxflo Exhaust option, but if you're looking for a very aggressive exhaust note and you're not worried about waking up the neighbors, this is the system for you! If you want the best of both worlds, check out our TrackTec Valved Exhaust, which will be slightly louder than the Supercup with the valves open and just as civilized as our Maxflo system with the valves closed

FEATURES:

• Fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
• Includes Deluxe Quad Style Tips in your choice of finish - Choose between Polished or Satin Black
• Increase horsepower and torque by 10 whp and 8 ft-lbs
• Saves 18lbs from the rear of the vehicle
• Complies with emissions regulations
• Includes two resonators to minimize weight and improve top end power.
• Constructed from high quality 14-16ga CNC mandrel-bent T304 stainless steel for maximum performance and durability
• Direct replacement for the OEM muffler with no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR987SCUP

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer Rear Box. Excl. Sports Rear Catalysts.

Pipe Diameter: 2.13" (54.00mm)
Tailpipe: Twin 90mm Special

Fits:
Porsche 987 Gen1 Boxster 2.7L 2004>>2009
Porsche 987 Gen1 Cayman 2.7L 2006>>2009
Porsche 987 Gen1 Boxster S 3.2L 2004>>2009
Porsche 987 Gen1 Cayman S 3.4L 2006>>2009

Parts Assembly:
MSPO177: LH Rear Cat Replacement Silencer Assembly
MSPO178: RH Rear Cat Replacement Silencer Assembly
MSPO237: LH Rear Silencer Assembly
MSPO238: RH Rear Silencer Assembly
MSTIP152: x2 Polished Tip Assembly

For Track Use ONLY!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SSXPO120

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer Rear Box. Excl. Sports Rear Catalysts.

Pipe Diameter: 2.13" (54.00mm)
Tailpipe: Twin 90mm Special

Fits:
Porsche 987 Gen1 Boxster 2.7L 2004>>2009
Porsche 987 Gen1 Cayman 2.7L 2006>>2009
Porsche 987 Gen1 Boxster S 3.2L 2004>>2009
Porsche 987 Gen1 Cayman S 3.4L 2006>>2009

Parts Assembly:
MSPO177: LH Rear Cat Replacement Silencer Assembly
MSPO178: RH Rear Cat Replacement Silencer Assembly
MSPO237: LH Rear Silencer Assembly
MSPO238: RH Rear Silencer Assembly
MSTIP155: x2 Ceramic Black Tip Assembly

For Track Use ONLY!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SSXPO121

The product you are viewing cross references to these numbers

SOUL Performance Exhaust System.

The SOUL Performance Exhaust System is a premium aftermarket stainless steel sports exhaust developed specifically for Porsche 987.1 Boxster and Cayman models manufactured between 2005 and 2008.

Fits:

• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08
• Porsche Cayman 2.7L 987C 2006-08
• Porsche Cayman S 3.4L 987C 2005-08  

Designed for Porsche's naturally aspirated flat-six engines, this system replaces the original rear exhaust assembly with a lighter, freer-flowing configuration that provides a more pronounced exhaust note without sacrificing everyday driving refinement.

The original Porsche 987.1 exhaust incorporates secondary catalytic converters, restrictive pipework and relatively heavy silencers. Although these components help control emissions and noise, they also influence exhaust flow, sound characteristics and overall vehicle weight.

SOUL Performance developed its exhaust system to enhance the driving experience by allowing more of the flat-six engine's distinctive sound to be heard during acceleration while maintaining a controlled exhaust tone during normal driving.

The system incorporates free-flowing, mandrel-bent T304L stainless steel tubing and specially designed performance silencers with reinforced outer casings.

These silencers are engineered to produce a deeper and more engaging exhaust sound under throttle while greatly reducing unwanted low-frequency cabin resonance.

Unlike a conventional straight-through race exhaust, the SOUL Performance Exhaust System is designed to remain refined during cruising.

The manufacturer specifically states that its silencer arrangement minimises drone, including when paired with compatible aftermarket exhaust headers.

This is a non-valved exhaust system, meaning that it does not require vacuum-operated exhaust valves, electronic controllers or additional valve-control equipment.

Instead, the sound characteristics change naturally according to engine speed and load.

During gentle driving, the exhaust produces a restrained sporting tone. Under harder acceleration, the engine delivers a stronger and more aggressive flat-six soundtrack.

SOUL Performance manufactures the system using corrosion-resistant T304L stainless steel tubing and reinforced performance silencers.

The mounting brackets are strengthened to help prevent fatigue cracking and other damage caused by vibration and repeated thermal cycling.

According to SOUL Performance, the replacement exhaust weighs approximately 21.7 lb (9.8 kg) compared with approximately 36.6 lb (16.6 kg) for the factory components.

This represents a manufacturer-reported saving of approximately 15 lb (6.8 kg).

Each exhaust system is quality-checked and tested in a fitting fixture to verify installation accuracy.

The kit is designed for direct bolt-on installation and includes new high-grade hardware for the header-to-exhaust flange connections, along with installation instructions.

Backed by SOUL Performance's lifetime warranty, subject to the manufacturer's terms, this exhaust is an attractive upgrade for Porsche owners seeking enhanced engine sound, improved exhaust flow potential, reduced weight and durable stainless steel construction.

What This Product Does:
The SOUL Performance Exhaust System directs combustion gases from the engine's upstream exhaust components through the rear exhaust assembly and out of the vehicle.

During engine operation, exhaust gases leave the cylinder heads and pass through the exhaust manifolds and primary catalytic converters, where fitted.

The gases then enter the rear exhaust system.

The SOUL Performance Exhaust replaces the factory rear arrangement with mandrel-bent stainless steel tubing and performance silencers.

Its primary functions include:

• Directing exhaust gases: Carries combustion gases safely towards the rear exhaust outlets.
• Supporting efficient exhaust flow: Uses smooth-radius, mandrel-bent stainless steel pipework.
• Reducing exhaust restriction: Replaces the factory rear assembly, including its secondary catalytic converters.
• Enhancing engine sound: Produces a fuller and more aggressive flat-six exhaust note during acceleration.
• Minimising cabin drone: Uses specially designed silencers to reduce unwanted low-frequency resonance.
• Maintaining cruising refinement: Provides a more restrained exhaust note at steady engine loads.
• Reducing exhaust weight: Offers an approximately 15 lb manufacturer-reported weight saving.
• Supporting durability: Uses corrosion-resistant stainless steel and strengthened mounting components.
• Maintaining exhaust alignment: Provides reinforced brackets designed to secure the exhaust during normal and demanding driving.
• Improving rear-end styling: Allows owners to choose different exhaust tip materials and finishes.
• Supporting performance modifications: Can be combined with suitable aftermarket exhaust headers.
• Simplifying operation: Provides sporting exhaust sound without electronic or vacuum-operated valves.
  
  

Exhaust Sound Characteristics:
Normal Driving – Refined Sporting Tone

During gentle acceleration and steady cruising, the system is designed to maintain a controlled exhaust sound.

Benefits include:

• A deeper flat-six exhaust tone.
• Reduced unwanted cabin resonance.
• More refined motorway driving than a typical race exhaust.
• Consistent exhaust operation without valve controls.
• A sporting sound without continuously excessive volume.

Acceleration – Aggressive Flat-Six Sound

Under heavier throttle, the exhaust produces a more pronounced soundtrack.

Drivers can expect:

• A stronger exhaust note during acceleration.
• More noticeable flat-six engine character.
• Greater sound intensity at higher engine speeds.
• A more engaging sound during gear changes and downshifts.
• Increased exhaust character compared with the original rear silencers.

The final sound will depend on the original or aftermarket exhaust headers fitted to the vehicle.



Why Upgrading Matters:

1. Enhanced Flat-Six Engine Sound

The SOUL Performance Exhaust produces a deeper, fuller and more aggressive sound than the original rear exhaust assembly.

It is designed to highlight the character of the Porsche flat-six engine without the excessive noise associated with some motorsport exhausts.

2. Reduced Unwanted Drone

The performance silencers are specifically developed to minimise unwanted cabin resonance.

This makes the system appealing to owners who want an engaging exhaust note without consistently high noise levels.

3. Improved Exhaust Flow Potential

The system uses smooth, mandrel-bent stainless steel tubing and replaces the factory rear exhaust configuration.

This is intended to reduce unnecessary exhaust restriction.

4. Lightweight Construction

SOUL Performance reports the following weight comparison:

Factory rear exhaust: approximately 36.6 lb (16.6 kg). SOUL Performance Exhaust: approximately 21.7 lb (9.8 kg). Weight saving: approximately 15 lb (6.8 kg).

Reducing unnecessary vehicle weight can be beneficial in performance-focused applications.

5. Stainless Steel Durability

T304L stainless steel provides corrosion resistance and durability under high-temperature operating conditions.

6. Reinforced Exhaust Mounting

The strengthened brackets and fortified silencer casings are designed to resist fatigue damage caused by vibration and repeated thermal cycling.

7. No Exhaust Valve Maintenance

Because this system is non-valved, there are no exhaust valve actuators, vacuum-control hoses or electronic switching mechanisms associated with the replacement exhaust itself.

8. More Engaging Driving Experience

The stronger exhaust sound makes the engine's response more noticeable during acceleration and gear changes.

9. Compatibility with Aftermarket Headers

SOUL designed the exhaust to work with compatible aftermarket exhaust headers.

The manufacturer specifically highlights the system's controlled sound characteristics when used with its performance header configurations.

10. Premium Exhaust Tip Options

Owners can choose from different stainless steel exhaust tip finishes or select lightweight titanium tips.

11. Direct Bolt-On Installation

The exhaust is designed to fit the compatible original mounting arrangement.

SOUL fixture-tests each system and supplies fitting instructions and relevant hardware.

12. Manufacturer Lifetime Warranty

SOUL Performance provides a lifetime warranty for its exhaust components, subject to the published terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

POR.9871.ESX.

The product you are viewing cross references to these numbers

Sports exhaust rear silencer and catalytic converter bypass kit
Porsche 987 Gen 1 Boxster and Cayman (2005-2008)
Removes catalytic converters

Fits:
Gen 1 2005-2008
Porsche Boxster 2.7Ltr
Porsche Boxster 3.2Ltr and 3.4Ltr
Porsche Cayman 2.7L
Porsche Cayman 3.4Ltr

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction

ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

MATERIAL - AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 57mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust rear silencer and catalytic converter kit
Porsche 987 Boxster and Cayman Gen 1 (2005-2008)
Reduced cell catalytic converter and sports exhaust

Fits:
Gen 1 2005-2008
Porsche Boxster 2.7Ltr
Porsche Boxster 3.2Ltr and 3.4Ltr
Porsche Cayman 2.7L
Porsche Cayman 3.4Ltr

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

REDUCED CATALYTIC CONVERTER CELLS - 300
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still cutting pollutant emissions and boosts power and sound

ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 55mm
This is the diameter of the main pipe of the exhaust system

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust rear silencer Porsche 987 Gen 1 Boxster and Cayman 2006-2009

No EC type approval

Fits 2006-2009
987 Boxster 2.7ltr
987 Boxster S 3.2ltr, 3.4ltr
987 Cayman 2.7ltr
987 Cayman S 3.2ltr, 3.4ltr

RACING stainless steel sport exhaust system with left and right hand silencers (without tail pipes)
From catalytic convertors backwards, no secondary catalytic convertors fitted

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6861061500

The product you are viewing cross references to these numbers