Intermediate Shaft Bearing Pressurized Oil Feed Kit

Intermediate Shaft Bearing Pressurized Oil Feed Kit



How it works?
The Oil Pump's factory 8MM Allen drive is replaced with a slotted 8MM drive. The slot on the new 8MM drive will provide a governed oil passage from the oil Pump pressure side into and through the IMS.

This is achieved by punching a small hole in the cover at the front of the IMS. The front cover is a very thin metal plug, only .25MM thick. Using a sharpened center punch and a hammer the hole can be opened with relative ease.

This pressurized oil will flow through the IMS and in to the the IMS bearing. This will maintain a constant, fresh oil flow to the IMS bearing.


For Installation Instructions CLICK HERE

Fits:
Porsche 996 C2 3.4L 1998 - 2001
Porsche 996 C2 3.6L 2002 - 2004
Porsche 996 C4 3.4L 1999>>
Porsche 996 C4 3.6L 2000>>
Porsche 996 C4 3.4L 2001>>
Porsche 996 C4 3.6L 2002 - 2004
Porsche 996 GT2 3.6L 2001 - 2005
Porsche 996 GT3 3.6L 2004 - 2005
Porsche 996 Turbo 3.6L 2001 - 2004
Porsche 996 Turbo 3.6L 2005>>
Porsche 996 Turbo S 3.6L 2005>>
Porsche 997 C2 3.6L 2005>>
Porsche 997 C2S 3.8L 2005>>
Porsche 997 C4 3.6L 2005>>
Porsche 997 C4S 3.8L 2005>>
Porsche Boxster 2.5L 1997 - 1999
Porsche Boxster 2.7L 2000 - 2003
Porsche Boxster 2.7L 2004 - 2005
Porsche Boxster S 3.2L 2000 - 2005

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610590102EPSFEED

您正在查看的产品与这些编号存在交叉引用关系