点火线圈
按车型类型筛选
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
按品牌过滤
Ignition kit for CIS injection with 3 pin Gen 6 CDI module. Porsche 911 2.7 / 2.7S
代码: IGNITIONKITCIS
Ignition kit for CIS injection car with 3 pin Gen 6 CDI (HKZ) module. Porsche 911 2.7, 2.7S
Fits
Porsche 911 2.7 1974 - 1977
Porsche 911 2.7S 1974 - 1977
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITCIS
您正在查看的产品与这些编号存在交叉引用关系
Fits
Porsche 911 2.7 1974 - 1977
Porsche 911 2.7S 1974 - 1977
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITCIS
91160270700
91160270700
90160250200
911602021
90160250200
911MF126
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
€1,615.42
当前 €1,534.65
库存
Ignition kit for MFI with 3 pin Gen 6 CDI module. Porsche 911 T / E / S
代码: IGNITIONKITMFI
Ignition kit for MFI car with 3 pin Gen 6 CDI (HKZ) module. Porsche 911 2.4 T / E / S and 2.7 MFI
Fits
Porsche 911 2.4 T 1970 - 1973
Porsche 911 2.4 E 1970 - 1973
Porsche 911 2.4 S 1970 - 1973
Porsche 911 2.7 MFI 1973 - 1974
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITMFI
您正在查看的产品与这些编号存在交叉引用关系
Fits
Porsche 911 2.4 T 1970 - 1973
Porsche 911 2.4 E 1970 - 1973
Porsche 911 2.4 S 1970 - 1973
Porsche 911 2.7 MFI 1973 - 1974
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITMFI
91160270700
91160270700
90160250200
911602021
90160250200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
€1,580.02
当前 €1,501.02
库存
Ignition kit with 3 pin Gen 6 CDI module. Porsche 911 2.0ltr / 2.2ltr
代码: IGNITIONKIT9E
Ignition kit with 3 pin Gen 6 CDI (HKZ) module. Porsche 911 2.0ltr and 2.2Ltr
Fits
Porsche 911 2.0ltr 1965 - 1969
Porsche 911 2.2ltr 1970 - 1972
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKIT9E
您正在查看的产品与这些编号存在交叉引用关系
Fits
Porsche 911 2.0ltr 1965 - 1969
Porsche 911 2.2ltr 1970 - 1972
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKIT9E
91160270700
90160250200
911602021
90160250200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€1,393.52
当前 €1,323.84
库存
Ignition kit with 6 pin basic CDI module. Porsche 911 SC and 911 turbo (USA)
代码: IGNITIONKITSCB
Ignition kit with basic 6 pin CDI (HKZ) module. Porsche 911SC and turbo
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Basic
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models: Premium ignition module and the Basic ignition module. The Basic model is just that, basic: it performs only the same functions as the analog modules did back in the day. For the average street car, this may be all that is desired and of course is more affordable than the Premium model. It is however still a high performance part and is perfect for racing venues that do not allow programmable digital ignition systems. The Basic model has a smooth, more original looking housing than the Gen 5 cast housing.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITSCB
您正在查看的产品与这些编号存在交叉引用关系
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Basic
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models: Premium ignition module and the Basic ignition module. The Basic model is just that, basic: it performs only the same functions as the analog modules did back in the day. For the average street car, this may be all that is desired and of course is more affordable than the Premium model. It is however still a high performance part and is perfect for racing venues that do not allow programmable digital ignition systems. The Basic model has a smooth, more original looking housing than the Gen 5 cast housing.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITSCB
93060270200
93060270200
930602021DX
930602021DX
90160250200
90160250200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
€1,674.42
当前 €1,590.70
库存
Ignition kit with 6 pin Gen 5 CDI module. Porsche 911 SC and 911 turbo (USA)
代码: IGNITIONKITSCG5
Ignition kit with 6 pin Gen 5 CDI (HKZ) module. Porsche 911SC and turbo
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 5
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Gen 5 Version
Distributor with Harness
Ignition Coil
CDI Module
The Generation 5 ignition boxes make diagnostics easier. The controller monitors and runs diagnoses programs automatically and is read by two coloured LED function lights the are viewable from underneath the unit. The diagnoses can also be done via a Bluetooth programming dongle which is available as a separate item.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITSCG5
您正在查看的产品与这些编号存在交叉引用关系
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 5
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Gen 5 Version
Distributor with Harness
Ignition Coil
CDI Module
The Generation 5 ignition boxes make diagnostics easier. The controller monitors and runs diagnoses programs automatically and is read by two coloured LED function lights the are viewable from underneath the unit. The diagnoses can also be done via a Bluetooth programming dongle which is available as a separate item.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITSCG5
93060270200
93060270200
930602021DX
930602021DX
90160250200
90160250200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
€1,674.42
当前 €1,590.70
库存
Ignition kit with 6 pin Premium CDI module. Porsche 911 SC and turbo (USA)
代码: IGNITIONKITSCP
Ignition kit with Premium 6 pin CDI (HKZ) module. Porsche 911SC and turbo
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models:Premium ignition module and the Basic ignition module.
The Premium ignition module features a smooth, matt finish that mimics the patina of the original aluminum die cast part. It provides full control over RPM limit, mechanical advance timing, power output, multi spark function and has many other features that can be programmed using a computer, tablet or smart phone. This module comes preprogrammed for the Porsche 911SC so programming changes are optional. The Gen 6 Premium Perma-Tune makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights. These LED lights assist in diagnosing both the vehicle and the ignition module. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light. This LED is especially useful for detecting intermittent engine misfire caused by wiring or distributor problems. The LED function lights are mounted in the harness electrical connector and can only be seen when the module is powered up. There are three self-resetting overload protectors that assist in troubleshooting while protecting your Perma-Tune from damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part. Refer to the Diagnostics section of this web site for more information about the diagnostics system and overload protectors.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITSCP
您正在查看的产品与这些编号存在交叉引用关系
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models:Premium ignition module and the Basic ignition module.
The Premium ignition module features a smooth, matt finish that mimics the patina of the original aluminum die cast part. It provides full control over RPM limit, mechanical advance timing, power output, multi spark function and has many other features that can be programmed using a computer, tablet or smart phone. This module comes preprogrammed for the Porsche 911SC so programming changes are optional. The Gen 6 Premium Perma-Tune makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights. These LED lights assist in diagnosing both the vehicle and the ignition module. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light. This LED is especially useful for detecting intermittent engine misfire caused by wiring or distributor problems. The LED function lights are mounted in the harness electrical connector and can only be seen when the module is powered up. There are three self-resetting overload protectors that assist in troubleshooting while protecting your Perma-Tune from damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part. Refer to the Diagnostics section of this web site for more information about the diagnostics system and overload protectors.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
IGNITIONKITSCP
93060270200
93060270200
930602021DX
930602021DX
90160250200
90160250200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
€1,745.22
当前 €1,657.96
库存
Complete ignition harness for a 3 pin CD1/HK2 box. Porsche 911 1965-73 / 914
代码: 91161205000/1
Complete ignition harness for a 3 pin CD1/HK2 box.
Includes all connector boots, PVC sheathing, high grade automotive wire, flat braided ground cable and contacts per the original specifications. Compatible with cars up to 1973.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161205000
您正在查看的产品与这些编号存在交叉引用关系
Includes all connector boots, PVC sheathing, high grade automotive wire, flat braided ground cable and contacts per the original specifications. Compatible with cars up to 1973.
Fits:
Porsche 911 1965-73
Porsche 914/6 1971-75
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161205000
91161205000
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€234.82
当前 €227.78
库存
Console for twin ignition coil. Porsche 911 / 912
代码: COM111106
Console for twin ignition coil.
Fits:
Porsche 911 and 912 (1965-1973) models
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
COM111106
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 and 912 (1965-1973) models
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
COM111106
90160250200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
€21.24
当前 €20.60
即将抵达
Ignition coil 12V. Porsche 911 S / L / T 12V 1969-72
代码: 90160210200/1
Ignition coil 12V
Fits:
Porsche 911 2.0L S / L / T 12V 1968-72
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160210200
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 2.0L S / L / T 12V 1968-72
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160210200
90160210200
54760210200
90160250201
1691600402
0040100109
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€115.64
当前 €113.33
库存
Ignition coil 12-V. Porsche 356 1600/S/S90 / 912
代码: 61660210900
Ignition coil 12-V.
Fits:
Porsche 356 1600/S/S90 1960-65
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
61660210900
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 356 1600/S/S90 1960-65
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
61660210900
61660210900
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
价格: €152.49
由供应商供货
Ignition coil 12-V. Porsche 356 1600/S/S90 / 912
代码: 61660210900/1
Ignition Coil 12-V.
Fits:
Porsche 356 1600/S/S90 1960-65
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
61660210900
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 356 1600/S/S90 1960-65
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
61660210900
61660210900
0221119027
043905115c
92860250200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€57.82
当前 €56.66
缺货订单
Ignition coil 12-V. Porsche 356 1600/S/S90 / 912
代码: 61660210900/2
Ignition coil 12-V.
Fits:
Porsche 356 1600/S/S90 1960-65
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
61660210900
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 356 1600/S/S90 1960-65
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
61660210900
92860250200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€57.82
当前 €56.66
库存
Ignition coil 12-V. Porsche 356 1600/S/S90 / 912 / 914
代码: 61660210900/3
Ignition coil 12-V. Porsche 356 1600/S/S90 / 912 / 914
Fits:
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
61660210900
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 356C 1.6L 08/1964-12/1965
Porsche 912 1.6L 01/1965-02/1970
Porsche 914/4 1.7L-2.0L 01/1969-07/1976
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
61660210900
61660210900
92860250200
8191600407
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€57.82
当前 €56.66
库存
Ignition coil 14v. Porsche 911 84-89 / 924S / 944 / 964 / 968 / 928 Ref: 0221118322, 94460211500
代码: 94460211501/3
Ignition coil 14v. Porsche 911 84-89 / 924S / 944 / 964 / 968 / 928 (Bosch ref: 0221118322)
(Please note the Bosch product is no longer available so this is one of the only alternatives. )
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94460211501
您正在查看的产品与这些编号存在交叉引用关系
(Please note the Bosch product is no longer available so this is one of the only alternatives. )
Fits:
Porsche 911 1984-89 (not Turbo)
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 964 C2 / C4 1989-94
Porsche 968 1992-95
Porsche 928 Cars Up to 1988 *2 Ignition Coils Per Car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94460211501
94460211500
0221118322
0221118383
WG2277520
94460211501
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
€112.10
当前 €108.74
库存
Ignition coil bracket. Porsche 356 / 911 / 912 / 914-4
代码: SMC602108
Ignition coil bracket. Perfect reproduction of the original Bosch coil bracket.
Fits:
Porsche 356A / 356B / 356C 1955-65
Porsche 911 1965-1968
Porsche 912 1965-1969
Porsche 914-4 1970-1976
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SMC602108
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 356A / 356B / 356C 1955-65
Porsche 911 1965-1968
Porsche 912 1965-1969
Porsche 914-4 1970-1976
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SMC602108
64460210800
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€23.60
当前 €22.89
由供应商供货
Ignition coil bracket. Porsche 911 / 914-6 / 930 / 964C2/C4
代码: 90160250200/1
Ignition coil bracket. Perfect reproduction of the original Bosch coil bracket.
Fits:
Porsche 911 1969-1989
Porsche 914/6 1970-1972
Porsche 930 1976-1989
Porsche 964 C2/C4 1989-1994
Porsche 944
Porsche 928
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250200
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 1969-1989
Porsche 914/6 1970-1972
Porsche 930 1976-1989
Porsche 964 C2/C4 1989-1994
Porsche 944
Porsche 928
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250200
901.602.502.00
90160250200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
€25.91
当前 €25.13
库存
Ignition Coil Plug. Porsche 911 3.2L 1985-89 / 928 1983-91
代码: 92860213100
Ignition Coil Plug.
Fits:
Porsche 911 3.2 1985-89
Porsche 928 1983-91
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92860213100
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 3.2 1985-89
Porsche 928 1983-91
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92860213100
92860213100
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
价格: €21.58
由供应商供货
Ignition Coil Protection Cap Porsche 911 84-89 / 924S / 944 / 964 / 968
代码: 94460280100
Ignition Coil Protection Cap.
Fits:
Porsche 911 1984-89 (not Turbo)
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 964 C2 / C4 1989-94
Porsche 964 Carrera RS 1992
Porsche 964 C2 Tiptronic 1990-94
Porsche 968 1992-95
Click "Zoom In" for large parts diagram.
Diagram ref no 2.
Fits:
Porsche 911 1984-89 (not Turbo)
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 964 C2 / C4 1989-94
Porsche 964 Carrera RS 1992
Porsche 964 C2 Tiptronic 1990-94
Porsche 968 1992-95
Click "Zoom In" for large parts diagram.
Diagram ref no 2.
产品车辆组
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
价格: €31.02
库存
Ignition coil protection cap. Porsche 911 74-89
代码: 91160280100
Ignition coil protection cap.
Fits:
Porsche 911 1974-83
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160280100
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 1974-83
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160280100
91160280100
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
价格: €6.22
由供应商供货
Ignition coil protection cap. Porsche 911 74-89
代码: 91160280100/8
Ignition coil protection cap.
OEM products manufactured by the Original Equipment Manufacturer.
Fits:
Porsche 911 1974-83
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160280100
您正在查看的产品与这些编号存在交叉引用关系
OEM products manufactured by the Original Equipment Manufacturer.
Fits:
Porsche 911 1974-83
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160280100
91160280100
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€3.54
当前 €3.47
库存
Ignition coil. Porsche 911 / 930
代码: 90160250200
Ignition coil.
Fits:
Porsche 911 1970-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250200
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 1970-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250200
90160250200
0221121001
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
价格: €327.91
由供应商供货
Ignition coil. Porsche 911 / 930
代码: 90160250200/2
Ignition coil.
Fits:
Porsche 911 1969-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250200
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 1969-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250200
90160250200
0221121001
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€76.70
当前 €75.17
库存
Ignition Coil. Porsche 911 / 930
代码: 90160250200/3
Ignition Coil. Porsche 911 / 930
This coil is designed to replace the Marelli BAE202B ignition coil or Bosch 0221121001. It will work with the Porsche Perma-Tune ignition modules. It is intended to look like original equipment and is a high quality coil made in the USA.
Fits:
Porsche 911 1970-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
Porsche 356 12v Only
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250200
您正在查看的产品与这些编号存在交叉引用关系
This coil is designed to replace the Marelli BAE202B ignition coil or Bosch 0221121001. It will work with the Porsche Perma-Tune ignition modules. It is intended to look like original equipment and is a high quality coil made in the USA.
Fits:
Porsche 911 1970-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
Porsche 356 12v Only
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250200
90160250200
108536105
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€140.42
当前 €137.61
库存
Ignition Coil. Porsche 911 / 930 / 914
代码: 90160250201/1
Ignition Coil. Original SHORT type. (Bracket & decal shown not included)
This type coil is no longer made by Porsche.
Capacitor Discharge Ignition systems use a transformer, the CDI coil has a turns ratio of 100 to 1 so the voltage going in is multiplied 100 times to give you the voltage needed for the Porsche CDI system.
We have developed this coil to work with the Porsche CDI system and give you the strongest, cleanest spark. We stand behind our coil with a 12 month replacement guarantee when used within Porsche factory specifications for the complete system, using a Bosch or our CDI unit, solid core factory ignition wires and the correct spark plugs.
This coil is designed to replace the 901.602.502.00 Bosch coil.
We include the bracket decals and but not the bracket shown on the picture, available separately)
Fits:
Porsche 911 1969-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
Porsche 914/6 1970-76
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250201
您正在查看的产品与这些编号存在交叉引用关系
This type coil is no longer made by Porsche.
Capacitor Discharge Ignition systems use a transformer, the CDI coil has a turns ratio of 100 to 1 so the voltage going in is multiplied 100 times to give you the voltage needed for the Porsche CDI system.
We have developed this coil to work with the Porsche CDI system and give you the strongest, cleanest spark. We stand behind our coil with a 12 month replacement guarantee when used within Porsche factory specifications for the complete system, using a Bosch or our CDI unit, solid core factory ignition wires and the correct spark plugs.
This coil is designed to replace the 901.602.502.00 Bosch coil.
We include the bracket decals and but not the bracket shown on the picture, available separately)
Fits:
Porsche 911 1969-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
Porsche 914/6 1970-76
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250201
90160250201
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€271.40
当前 €265.97
库存
Ignition coil. Porsche 911 / 930 / 914
代码: 90160250201/2
Ignition coil. Original SHORT type.
This type coil is no longer made by Porsche.
Fits:
Porsche 911 1969-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
Porsche 914/6 1970-76
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250201
您正在查看的产品与这些编号存在交叉引用关系
This type coil is no longer made by Porsche.
Fits:
Porsche 911 1969-83 / 911 SC
Porsche 930 Turbo 3.0L 1975-77
Porsche 930 Turbo 3.3L 1986-89
Porsche 914/6 1970-76
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160250201
90160250201
0221119030
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€76.70
当前 €75.17
库存
Ignition coil. Porsche 911 84-89 / 924S / 944 / 964 / 968 / 928
代码: 94460211501
Ignition coil.
Fits:
Porsche 911 1984-89 (not Turbo)
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 964 C2 / C4 1989-94
Porsche 968 1992-95
Porsche 928 Cars Upto 1988 *2 Ignition Coils Per Car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94460211501
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 1984-89 (not Turbo)
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 964 C2 / C4 1989-94
Porsche 968 1992-95
Porsche 928 Cars Upto 1988 *2 Ignition Coils Per Car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94460211501
94460211500
0221118322
94460211501
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
价格: €182.64
库存
Ignition coil. Porsche 911 84-89 / 924S / 944 / 964 / 968 / 928
代码: 94460211501/2
Ignition coil kit. This is a kit that includes the mounting bracket, wiring harness and ignition coil.
Fits:
Porsche 911 1984-89 (not Turbo)
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 964 C2 / C4 1989-94
Porsche 968 1992-95
Porsche 928 Cars Upto 1988 *2 Ignition Coils Per Car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94460211501
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 1984-89 (not Turbo)
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 964 C2 / C4 1989-94
Porsche 968 1992-95
Porsche 928 Cars Upto 1988 *2 Ignition Coils Per Car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94460211501
94460211500
944906
0221118322
94460211501
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
€584.10
当前 €572.42
由供应商供货
Ignition coil. Porsche 911 S / L 12V >>1968
代码: 90160210201/2
Ignition coil.
Fits:
Porsche 911 S / L 12V >>1968
Porsche 356
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160210201
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 S / L 12V >>1968
Porsche 356
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90160210201
90160210201
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€63.72
当前 €62.45
库存
Ignition coil. Porsche 928 1989 With Cats / 928 1990 Onwards
代码: 92860211600/1
Ignition coil. Porsche 928 1989 With Cats / 928 1990 Onwards
Fits:
Porsche 928 1989 Car with Cats *2 Ignition Coils Per Car
Porsche 928 1990 Onwards *2 Ignition Coils Per Car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92860211600
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 928 1989 Car with Cats *2 Ignition Coils Per Car
Porsche 928 1990 Onwards *2 Ignition Coils Per Car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92860211600
92860211600
0 221 118 335
0221118335
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
€58.94
当前 €57.76
缺货订单
Ignition Harness for CDI 3 PIN. Porsche 911 1975-77
代码: 91161205100/1
CDI box wiring harness, 1975 to 1977 Three Pin
This is designed to replace your aging and cracked wiring harness that connects the CDI box to the ignition coil and ignition distributor. The harness will plug directly in as we now manufacture the plugs and boots.
This harness is for 1975 to 1977 911 not for Pertonix
Fits:
Porsche 911 1975-77
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161205100
您正在查看的产品与这些编号存在交叉引用关系
This is designed to replace your aging and cracked wiring harness that connects the CDI box to the ignition coil and ignition distributor. The harness will plug directly in as we now manufacture the plugs and boots.
This harness is for 1975 to 1977 911 not for Pertonix
Fits:
Porsche 911 1975-77
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161205100
91161205100
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
€261.96
当前 €256.72
库存
Ignition Harness for CDI 6 PIN. Porsche 911 1978-89
代码: 93061205000
6 Pin CDI Harness
This harness is designed to be a stand alone replacement wiring harness for the 911SC models using the 6 pin CDI system. Until now the only way to replace a damaged ignition harness on the SC models was to replace the entire engine harness. This is very expensive and time consuming to do. We have designed this harness to allow the mechanic to just replace the wiring harness that controls the ignition function of the vehicle. The harness will plug directly into the CDI Box, The Ignition distributor and coil. The only two connections that will require some plug dis-assembly are the 12V ignition connection at the rear fuse panel and the tachometer signal wire at the 14 pin plug connector. Both of these wires come with the correct connectors installed on the wires.
Fits:
Porsche 911 1978-83
Porsche 930 3.3L 1978-89
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93061205000
您正在查看的产品与这些编号存在交叉引用关系
This harness is designed to be a stand alone replacement wiring harness for the 911SC models using the 6 pin CDI system. Until now the only way to replace a damaged ignition harness on the SC models was to replace the entire engine harness. This is very expensive and time consuming to do. We have designed this harness to allow the mechanic to just replace the wiring harness that controls the ignition function of the vehicle. The harness will plug directly into the CDI Box, The Ignition distributor and coil. The only two connections that will require some plug dis-assembly are the 12V ignition connection at the rear fuse panel and the tachometer signal wire at the 14 pin plug connector. Both of these wires come with the correct connectors installed on the wires.
Fits:
Porsche 911 1978-83
Porsche 930 3.3L 1978-89
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93061205000
93061205000
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€365.80
当前 €358.48
库存
Ignition lead distributor to coil. Porsche 911 SC / 930 Turbo
代码: 91160906107
Ignition coil to distributor ignition lead, Single.
Fits:
Porsche 911SC 2.7L, 3.0L 1975>>
Porsche 930 3.3L 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160906107
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911SC 2.7L, 3.0L 1975>>
Porsche 930 3.3L 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160906107
91160906107
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
价格: €18.18
即将抵达
Spark plug protective rubber cap. Porsche 356 / 911 / 914
代码: 99965903440
Spark plug protective rubber cap.
sold each.
Fits:
Porsche 356 B / 356 C 1960-65
Porsche 911 / 912 1965-77
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99965903440
您正在查看的产品与这些编号存在交叉引用关系
sold each.
Fits:
Porsche 356 B / 356 C 1960-65
Porsche 911 / 912 1965-77
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99965903440
99965903440
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 356B 1959-63
- Porsche 356C 1963-65
价格: €6.47
由供应商供货
Spark plug protective rubber cap. Porsche 356 / 911 / 914
代码: 99965903440/1
Spark plug protective rubber cap.
sold each.
Fits:
Porsche 356 B / 356 C 1960-65
Porsche 911 / 912 1965-77
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99965903440
您正在查看的产品与这些编号存在交叉引用关系
sold each.
Fits:
Porsche 356 B / 356 C 1960-65
Porsche 911 / 912 1965-77
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99965903440
99965903440
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€5.63
当前 €5.46
由供应商供货
显示从1到34(共34个产品)
也可在这些页面找到
您可能也喜欢
流行车型