油冷却器/散热器/热交换器

Universal dual-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling



Fits
911/930 models up to 1989

RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units

These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling

Product Features:

•High Efficiency & Rugged Durability Bar/Plate Design

• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

8201

您正在查看的产品与这些编号存在交叉引用关系

Universal single-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W



Fits
911/930 models up to 1989

RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units

These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling

Product Features:

•High Efficiency & Rugged Durability Bar/Plate Design

• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

8202

您正在查看的产品与这些编号存在交叉引用关系

Cover plate for oil cooler, RIGHT, incl gaskets.



Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110708500

您正在查看的产品与这些编号存在交叉引用关系

Cover plate for oil cooler, RIGHT



Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110708500

您正在查看的产品与这些编号存在交叉引用关系

Engine oil cooler. Porsche 356 / 912   

ref : PCG10791250 / 61610704101/ 61610704102 / 61610704103



Fits:
Porsche 356 A/B/C 1.3-1.6 01/1950-12/1965
Porsche 912 1.6 01/195-02/1970

Click 'Zoom in' for large parts diagram.
Diagram ref no 1.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG10791250

您正在查看的产品与这些编号存在交叉引用关系

Front cooler oil intake Pipe.



Fits:
Porsche 911S / Carrera 2.7 1972-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91120702706

您正在查看的产品与这些编号存在交叉引用关系

Front cooler oil intake Pipe.



Fits:
Porsche 911S / Carrera 2.7 1972-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91120702706

您正在查看的产品与这些编号存在交叉引用关系

Front cooler oil RETURN pipe.



Fits:
Porsche 911S / Carrera 2.7 1972-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91120702905

您正在查看的产品与这些编号存在交叉引用关系

Front oil cooler oil pipe.



Fits:
Porsche 911 1965-71

Previous OE part number:
- 90110736110

Click 'Zoom in' for large parts diagram.
Diagram Ref No 16.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110736111

您正在查看的产品与这些编号存在交叉引用关系

Front oil cooler oil pipe.



Fits:
Porsche 911 1965-71

Previous OE part number:
- 90110736110

Click 'Zoom in' for large parts diagram.
Diagram Ref No 16.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110736111

您正在查看的产品与这些编号存在交叉引用关系

Front oil cooler oil pipe.



Fits:
Porsche 911 1965-71

This part number has been superseded from previous numbers:
- 90110736400
- 90110736402

Click 'Zoom in' for large parts diagram.
Diagram ref No 15.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110736403

您正在查看的产品与这些编号存在交叉引用关系

Front oil cooler oil pipe.



Fits:
Porsche 911 1965-71

This part number has been superseded from previous numbers:
- 90110736400
- 90110736402

Click 'Zoom in' for large parts diagram.
Diagram ref No 15.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110736403

您正在查看的产品与这些编号存在交叉引用关系

Front Oil Cooler Support Bracket.



Fits:
Porsche 911 1984-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020792700

您正在查看的产品与这些编号存在交叉引用关系

Hose clamp, oil cooler S pipe. 

Fits:
Porsche 911 - 1972 to 1989
Porsche 911 turbo - 1975 to 1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99951209100

您正在查看的产品与这些编号存在交叉引用关系

Hose clamp, oil cooler S pipe. 

Fits:
Porsche 911 - 1972 to 1989
Porsche 911 turbo - 1975 to 1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99951209100

您正在查看的产品与这些编号存在交叉引用关系

Installation kit for early engine case with 8mm x 8mm studs. Kit includes two oil cooler seal rings, part and two studs.



Fits:
Porsche 912
Porsche 356B / 356C

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SMC10704110

您正在查看的产品与这些编号存在交叉引用关系

Engine oil cooler.



Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG10791250

您正在查看的产品与这些编号存在交叉引用关系

至前冷却器的油管。

#保时捷#

适合：
保时捷 911 SC / 3.2L 1974-89

单击“放大”可查看大部件图。
图表参考编号 12A。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020711107

您正在查看的产品与这些编号存在交叉引用关系

Oil tube to front cooler.



Fits:
Porsche 911 SC / 3.2L 1974-89

Click picture for large parts diagram.
Diagram Ref No 12A.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020711107

您正在查看的产品与这些编号存在交叉引用关系

至前冷却器的油管。

#保时捷#

适合：
保时捷 911 SC / 3.2L 1980-89

单击“放大”可查看大部件图。
图表参考编号 11A。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020711306

您正在查看的产品与这些编号存在交叉引用关系

Oil tube to front cooler.



Fits:
Porsche 911 SC / 3.2L 1980-89

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11A.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020711306

您正在查看的产品与这些编号存在交叉引用关系

Radiator engine oil cooler front "Snake Type".
Radiator fits in the front under the wing.



Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110704700

您正在查看的产品与这些编号存在交叉引用关系

Radiator engine oil cooler front "Snake Type".
Radiator fits in the front under the wing.



Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110704700

您正在查看的产品与这些编号存在交叉引用关系

Radiator Engine Oil Cooler Front "Snake Type".
Radiator fits in the front under the wing.



Fits:
Porsche 911 1974-79
Porsche 930 1975-77 3.0L Turbo
Porsche 930 1978-79 3.3L Turbo

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91120705001

您正在查看的产品与这些编号存在交叉引用关系

Radiator engine oil cooler with screw socket
Radiator type fits in engine compartment.



Fits:
Porsche 911 1965-71

Click 'Zoom in' for large parts diagram.
Diagram ref No 8.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110704103

您正在查看的产品与这些编号存在交叉引用关系

带螺丝插座的散热器发动机油冷却器
散热器类型适合发动机舱。



适合：
保时捷 911 1965-71

单击“放大”可查看大部件图。
图表参考编号 8。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110704103

您正在查看的产品与这些编号存在交叉引用关系

Radiator engine oil cooler.
Radiator type fits in engine compartment.



Fits:
Porsche 911 1972-89

Click 'Zoom in' for large parts diagram.
Diagram Ref No 8.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110704102

您正在查看的产品与这些编号存在交叉引用关系

散热器发动机油冷却器。
散热器类型适合发动机舱。



适合：
保时捷 911 1972-89

单击“放大”可查看大部件图。
图表参考编号 8。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110704102

您正在查看的产品与这些编号存在交叉引用关系

散热器油冷却器 - 前部。

#保时捷#

适合：
保时捷 911 3.2L / 3.0L 1980-89

保时捷 911 3.3L 涡轮增压 1980-89

当您将冷却器添加到篮子中时，您可以选择温度传感器或盲塞（和垫圈）
请在需要时添加。冷却器不附带任何选项。

单击“放大”可查看大部件图。
图表参考编号 13

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020705304

您正在查看的产品与这些编号存在交叉引用关系

Radiator Oil Cooler Bottom Plate.



Fits:
Porsche 911 1984-89

Click 'Zoom in' for large parts diagram.
Diagram Ref No 33.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020712100

您正在查看的产品与这些编号存在交叉引用关系

散热器油冷却器盖板。前部。

#保时捷#

适合：
保时捷 911 1984-89

单击“放大”可查看大部件图。
图表参考编号 32

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020731915

您正在查看的产品与这些编号存在交叉引用关系

Radiator oil cooler cover plate, Front



Fits:
Porsche 911 Turbo 3.3L 1984-89
930.66 / 930.68 (Canada / USA)

Click 'Zoom in' for large parts diagram.
Diagram Ref No 32

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020731913

您正在查看的产品与这些编号存在交叉引用关系

Radiator oil cooler with threaded connector, M26x1.5, Front.



Fits:
Porsche 911 S 1969-1971

Click 'Zoom in' for large parts diagram.
Diagram Ref No 17

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110704603

您正在查看的产品与这些编号存在交叉引用关系

Radiator oil cooler with threaded connector, M26x1.5, Front.



Fits:
Porsche 911 S 1969-1971

Click 'Zoom in' for large parts diagram.
Diagram Ref No 17

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110704603

您正在查看的产品与这些编号存在交叉引用关系

Radiator oil cooler high-performance core. Porsche 911 / 911 turbo

OEM+ / High-Performance recreation of the original Behr Oil Cooler
CNC Machined mounting plate with helix design for strength and pocketed for weight savings
Modern Tube & Fin core with lower pressure drop and higher heat dissipation than the original
Stainless Steel Fittings for late model slip-on style (72-89) and early threaded style (65-71) with upgraded M30 “Widemouth” Design for improved flow
All OEM Behr features replicated on the billet mounting plate and cooler case
Comes standard with modern Cerakote titanium finish (additional heat dissipation) – modern interpretation of the OEM Behr finish
Optimized ID and flow characteristics of oil pipe for maximum oil flow through the vehicle’s oil system
Complete drop-in fit, absolutely no modifications to install

Fits:
Porsche 911 - 1972 to 1989
Porsche 911 turbo - 1975 to 1989

Click 'Zoom in' for large parts diagram.
Diagram Ref No 8

After 2+ years of development and 4 rounds of prototypes, the world debut of the CSF Porsche 911/930 Engine Oil Cooler at Rennsport Reunion 2023 was met with resounding enthusiasm. Air-cooled enthusiasts know the struggles associated with the oil cooler located on the engine block of the old flat six motor. CSF’s highly anticipated new release is arguably the most important modern engine upgrade to be released for the 911 in years.
While the original design was effective at the time, they have not aged well. On top of that, there have been no updates to the design and original replacement units can be hard to come by. When the CSF 911 was being built, CSF realized this was a much needed part for the air-cooled community and set out to design something special.

The old original coolers aren’t the only issue though. CSF has gotten many first hand reports of brand new OE coolers from Porsche’s revamped “Porsche Classic” Catalogue leaking within a few months of installation. Apparently the new items available from Porsche are not built as well as the original Behr coolers. CSF has now brought to market a modern OEM+ solution to this vintage design.

The high-performance core uses 7 cooling tubes with 8 rows of fins. Between the ultra efficient fin design and high flow tubes, the CSF cooler is ~10% more efficient than a brand new OE unit and up to 25% more efficient than a used unit.

Because the base plate of the cooler is also a common problem area, CSF sought to improve this area as much as possible. Instead of the original cast design, the CSF cooler uses a CNC machined billet aluminum plate. This offers a perfectly flat mounting surface which is both stronger and more resistant to warping over time. You’ll also notice a special helix design which adds strength while keeping weight at a minimum.

Each unit is Individually Leak and Pressure Tested with a 10 year warranty
New OEM coolers from Porsche are extremely scarce/hard to source and cost $1,300+

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110704102

您正在查看的产品与这些编号存在交叉引用关系

Radiator oil cooler, Front.
High-Performance Core Technology
50mm Core vs. OEM 45mm
15 Rows of Turbulated Tubes, 16 Rows of Fins (Same as OEM Spec)
Innovative Square Fin Design (Stronger, Better Performance, Less Clogging)
~10% Better Performance (Wind Tunnel Tested)
No Increase in Pressure Drop



Fits:
Porsche 911 3.2L / 3.0L 1984-89 - Direct Fit
Porsche 930 3.3L - Direct Fit
Porsche 911 / 930 1965 - 1983 Retrofit Capable

Click 'Zoom in' for large parts diagram.
Diagram Ref No 13

Cross reference numbers
93020705302, 93020705304

CSF is proud to announce the release of its highly anticipated Porsche 911/930 Turbo right fender oil cooler. CSF's new release brings OEM tier-1 quality, innovative features, and value to the platform's replacement and performance aftermarket (directly replaces OEM part number 930 207 053 02 and 930 207 053 04).

A close-up of the high-performance CSF core vs. a 35+ year old oil cooler that it is replacing. CSF's core has an innovative square fin design which helps alleviate clogging. It also increases performance and strength due to more surface area contact with the tubes.
M30 x 1.5 High-Flow Fittings
OEM Style, Machined In-House
17.5mm ID "Widemouth" Design vs. 14.5mm ID of the OEM Fittings
Stainless Steel w/ Copper Crush Washer for Increased Strength and Durability vs. OEM Mild Steel
Deeper Plunge for More Volume
50% Greater Flow Capacity for Maximum Performance
Comparison between CSF's high-flow fittings w/ 17.5mm ID widemouth design vs. the OEM 14.5mm ID design
M22 x 1.5 Inlet/Outlet Connections
Internal Radius for Maximum Flow
Optimized to Also Accept AN-16 Connections for Increased Versatility and Setup Configurations
CSF's M22 x 1.5 inlet/outlet feature improved internal radius connections for maximum flow of oil into and out of the oil cooler.
Temperature Sender Combination Mounting Boss
Three Fittings Included
Threaded Plug (For Use With No Fan)
M14 x 1.5P Adapter (For Use With OEM Fan)
3/8-18 NPTF Adapter (For Use With SPAL/Modern Fan)
1/2-14 NPTF design to accommodate the included three fittings

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020705304

您正在查看的产品与这些编号存在交叉引用关系

散热器油冷却器橡胶缓冲器。
每辆车 3 个。显示的价格为每辆

#保时捷#

适合：
保时捷 911 1984-89

单击“放大”可查看大部件图。
图表参考编号 14。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93020723902

您正在查看的产品与这些编号存在交叉引用关系